FORUMS

Analysis & Opinion

Top Forum Discussions

Alcatel One Touch Idol 2 S (OT-6050Y) Owners

155 posts
Thanks Meter: 23
 
By pckoloji, Senior Member on 4th September 2014, 07:40 AM
Post Reply Subscribe to Thread Email Thread
30th May 2015, 02:13 PM |#61  
Junior Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by konrado332211

i need CWM backup. If anybody can do this i really thanks


Hi,

here is a backup, https://mega.co.nz/#!LVxQRLyL!qJdtCq...QJLga2rGSeKc0E

Password : funka81
The Following 2 Users Say Thank You to funka81 For This Useful Post: [ View ]
 
 
12th June 2015, 04:40 PM |#62  
Junior Member
Flag Budapest
Thanks Meter: 0
 
More
Question Error
Quote:
Originally Posted by stalin2000zipok

Hi!
I'm from the community 4pda.
We ported TWRP.
Instructions:
1. Install ABD drivers from AdbDriverInstaller.exe
2. Put your device in FastBoot mode (turn it off, than, hold Volume Down + Power button.
After Alcatel One Touch Idol 2S logo appears, release buttons)
3. If you did everything correctly - Alcatel logo will stay on screen.
4. Plug in phone via USB.
5. Run check_device.cmd. If Ok, you can see "9e0eb10 fastboot" caption at bottom of command
window (digits can be other). If you see this caption - follow next step, if don't - check
adb drivers from #1 installed.
6. Run flash_recovery.cmd to flash TWRP. All done. To boot into TWRP turn off power, and hold
Volume Up and press Power.
Thanks: GR4YN , helpok
file download from this reporthttp://forum.xda-developers.com/show...5&postcount=49

Quote:
Originally Posted by stalin2000zipok

fastboot.exe sended

I faced a probem during flashing TWRP in the terminal. (Look at the attached photo.) What can I do? Though the script in the terminal have finished, still the previous recovery (CWM) loads.
Attached Thumbnails
Click image for larger version

Name:	TWRP_terminal_error.png
Views:	142
Size:	52.6 KB
ID:	3359678  
14th June 2015, 09:07 AM |#63  
Junior Member
Flag Budapest
Thanks Meter: 0
 
More
Quote:
Originally Posted by stalin2000zipok

All Hello again, due to the fact that the backup rolled forward to the 4.3 runs not all perfect, we publish all the action that needs to be done, that would change the ID of your phone with 6050Y 6050A on the Canadian version.

Done that, but my phone doesn't want to load the UI. :/ Still showing "ALCATEL onetouch" / "smart move.".

Edit: Just a restart, and everything is OK, except NFC - there's no option to turn it on. :/
Last edited by gyongyosimate1; 14th June 2015 at 09:19 AM.
3rd July 2015, 06:55 PM |#64  
Junior Member
Thanks Meter: 2
 
More
Unhappy TWRP error
stalin2000zipok
I need the old image for TWRP. Can anybody send me?
6th July 2015, 11:45 AM |#65  
Senior Member
Thanks Meter: 13
 
More
Quote:
Originally Posted by gyongyosimate1

I faced a probem during flashing TWRP in the terminal. (Look at the attached photo.) What can I do? Though the script in the terminal have finished, still the previous recovery (CWM) loads.

Quote:
Originally Posted by stalin2000zipok

fastboot.exe sended

Me too i need this .img for have the twrp.

Thank you very much by the way
7th July 2015, 08:27 AM |#66  
Junior Member
Flag Budapest
Thanks Meter: 0
 
More
Quote:
Originally Posted by frank087234

Is there really kitkat update for idol2 mini S ????

There is, in Hungary.
11th July 2015, 07:52 PM |#67  
Senior Member
Thanks Meter: 13
 
More
Hi, for all of you can't login on 4pda.ru (I'v done it), here is all tuts for have the 4.4.2 of the CA version of our phone.

Quote:
Originally Posted by stalin2000zipok

Hi!
I'm from the community 4pda.
We ported TWRP.
Instructions:
1. Install ABD drivers from AdbDriverInstaller.exe
2. Put your device in FastBoot mode (turn it off, than, hold Volume Down + Power button.
After Alcatel One Touch Idol 2S logo appears, release buttons)
3. If you did everything correctly - Alcatel logo will stay on screen.
4. Plug in phone via USB.
5. Run check_device.cmd. If Ok, you can see "9e0eb10 fastboot" caption at bottom of command
window (digits can be other). If you see this caption - follow next step, if don't - check
adb drivers from #1 installed.
6. Run flash_recovery.cmd to flash TWRP. All done. To boot into TWRP turn off power, and hold
Volume Up and press Power.
Thanks: GR4YN , helpok
file download from this reporthttp://forum.xda-developers.com/show...5&postcount=49

Download the TRWP img from here : https://drive.google.com/file/d/0B49...ew?usp=sharing

Quote:
Originally Posted by stalin2000zipok

Android 4.4.2 Kit Kat for Alcatel 6050Y, ENG


Hello. That long-awaited firmware for our phone, but unfortunately the Russian language in it.
For the rest, it's a great firmware work in networks has shown excellent results, charge an adequate rate, a synthetic test scored 18000 points.
Note: Your phone must be unlocked!
Instructions:
1. Setup TWRP
2. Loading the firmware on your PC
This firmware has GOOGLE APPS
https://yadi.sk/d/hsHHfV9lgmJaL
This firmware is not GOOGLE APPS
https://yadi.sk/d/0HDwpnk_gnJPz
3. Extract
4. Write to the flash card option type F: \ TWRP \ BACKUPS \ 53deb6fa \ 1970-01-01--13-24-36
5. Turn off the phone
6. Turn on the phone and in recovery: "Volume UP" and "Power On"
7. Select> Restore> 1970-01-01--13-24-36> how to unlock the bottom> Swype to Resrote (blue circle with an arrow to pull to the right)
8. Reboot and enjoy the new firmware!
Thank you to everyone who helped --- GR4YN --- WestFring --- helpok --- deadlink ---
P.S.Firmware received from Canada, substitute 6050I 6050A on, that's all! With a network everything is fine you can see everything, do not forget to make a backup of your firmware.
None of what you delet any answer except yourself.


Quote:
Originally Posted by stalin2000zipok

All Hello again, due to the fact that the backup rolled forward to the 4.3 runs not all perfect, we publish all the action that needs to be done, that would change the ID of your phone with 6050Y 6050A on the Canadian version.
ATTENTION !!! All those who decide to do 1. Make a backup BOOT sector. 2. When working with the instructions there is a line above the Y6050, in my screenshot IJ indicated it does not change it, it for each unique. And yet how to make a file "p3.img" copy it as an additional backup.
1. The mobile should be is not locked!
2. Root on the device
3. PC or Laptop
Instructions.
1. To install the terminal
https://play.google.com/store/apps/d...roidterm&hl=ru
2. Instal hex editor
https://play.google.com/store/apps/d...ba.tools&hl=ru
3. Run a terminal and write without the quotes

Code:
su
and press enter (the resolution must come from the Root SuperSu for entitlement)
4. After this, as we have done in our place of "$" icon to be "#"
5. Writing in the terminal
Code:
dd if=/dev/block/mmcblk0p3 of=/sdcard/p3.img
6. It should leave a message view screenshot1.jpg
7. Now open the HEX Redactor and look on the card file "p3.img" it would without the quotes.
8. Now look for the line that has the information of the
Code:
ULY6050Y-2CBGRU7
look for clarity screen, I selected an orange2.jpg
9. We need to change a line in the IJY6050Y-2DB6CA7
10. Each character must be changed individually and so begin.
11. Where in the screenshot 59 changes to 41 should get on the line Y6050A-2
12. From the following input line 44 42 36 43 41
13. The result should look like this: see. Screenshot.3.jpg
14. Save the resulting RESULT.
15. Open the terminal and write
Code:
dd if=/sdcard/p3.img of=/dev/block/mmcblk0p3
after writing the code press enter
16. The terminal should display the following. cm. screenshot4.jpg
17 Done! Now connect your phone to select the Mobile Upgrade Q 6050http://www.alcatelonetouch.com/ru/do...-6-5-setup.rar
18. Update, download and install the Jew and rejoice 4.4.2 from official sources.
Thank you for giving instructions GR4YN & me helpok
P.S. Sorry for my English, I skipped classes in school.

Quote:
Originally Posted by stalin2000zipok

Faced with such a problem that does not go to the settings in security. It happens that it downloads from the forum, instead of wasting money. But because of an error in the settings you can not install applications from other sources. But this problem can be solved. Es Download the guide, go to settings, flipping naholim application settings, apps and already there, put a checkmark to remove / install applications. I tried to download the camera fv-5 pro, and so properly set. Installed, it works.)

PS: I can't install apk (setting stops when i click on "security"), so if anyone understand how to do it, i will post it here.
Last edited by flavien317; 11th July 2015 at 07:56 PM.
22nd July 2015, 10:55 AM |#68  
Member
Flag 127.0.0.1
Thanks Meter: 17
 
More
Have a look on this :
http://support.bell.ca/Mobility/Smar...TOUCH-IDOL-2-S
Kitkat seems to be ready...
I hope this update will come in France soon !
23rd July 2015, 03:09 AM |#69  
audit13's Avatar
Senior Member
Flag Toronto
Thanks Meter: 2,370
 
More
The Bell update came out around December, 2014.
23rd August 2015, 11:58 PM |#70  
B4-Hunter's Avatar
Member
Flag Łódź
Thanks Meter: 23
 
More
Hi everyone!

My friend droped the phone and then it went dead. Only first phone logo appear and then nothing.

I flashed CWM Recovery but every time I turn it on I get:

E: Failed reading /dev/block/platform/msm_sdcc.1/bg-name/misc (I/O error)
E: Can't mount /cache/recovery/command
E: Failed closing /dev/block/platform/msm_sdcc.1/bg-name/misc (I/O error)
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/log

etc.

Any idea how to fix it?
Last edited by B4-Hunter; 24th August 2015 at 12:41 AM.
Post Reply Subscribe to Thread

Tags
alcatel, idol 2 s, one touch, root, simlock
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes