[CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4

Search This thread

m4jonez

Senior Member
logo.png

Samsung GT-S7562 CyanogenMod 11.0 Android 4.4.4

Unofficial Release


I proudly present my first Android related work.
The GT-S7560M has a similar hardware except the dual-SIM RIL, so the kylessopen firmware (thanks to jonypx09 and others) was a good initial source.
I reverse engineered the stock Java Radio Interface Layer, and based on that informations, I restructured the kylessopen’s sources.
Finally with my custom telephony-common, telephony-msim java layer, and with the stock rild, and libril*.so binaries, the GSM connection works.

Important: This is an unofficial release. If you find a bug, please send a feedback in this thread.
If you have a problem with the installation, write it down in the Q&A thread.


Compatibility:
  • S7562, S7562L supported.
  • S7562_C_, S7562_i_ are not supported. Don't flash on it, otherwise you will brick your phone.

Issues:
  • Video Encoding has bugs.
  • Camera is only 3Mpx.
  • FM radio not supported.
  • WiFi not works on L version, I need a tester.

Requirements:
  • TWRP Recovery latest (3.0.2) recommended
Installing TWRP method when no custom recovery is installed at all:
  • 1. Download Odin flashable TWRP .tar to your PC
  • 2. Reboot to download mode and flash TWRP with Odin
  • 3. Reboot to TWRP recovery using VolUP+VolDN+Home+Power keycombo
  • 4. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
  • 5. proceed with cm Installation
Installing TWRP method when custom recovery cwm or twrp is already installed:
  • 1. Download the latest Recovery flashable TWRP .zip package to your device
  • 2. Reboot to custom recovery and flash TWRP .zip
  • 3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
  • 4. proceed with cm Installation

CM11 Installation method:
  • 1. Download the latest cm11 package to your device
  • 2. Reboot to TWRP recovery.
  • 3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important.
  • 4. Make a factory-reset / Wipe your phone (everythig except SDCARD) important to prevent bootloops
  • 5. Install Unofficial CM11 with TWRP (Uncheck zip file verification before install).
  • 6. Reboot and configure your system
  • optional. If you are going to use gapps, reboot to TWRP recovery, flash gapps.
  • optional. If your mobile Connections are not working Flash the hungarian modem using TWRP recovery

Download links:

Hungarian Modem: Modem_S7562XXLJ3.zip Recovery flashable
Odin v3 for Windows: Odin3_GT-S7562.zip
Recovery - TWRP 3.0.2: recoveryTWRP302 Recovery flashable
Recovery - TWRP 3.0.2: recoveryTWRP302 Odin flashable
Latest version of gapps - opengapps.org. Select ARM as platform, select 4.4 as Android. As variant "pico" is recomended.
Stock Hun Firmware: S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.7z


S7562 Cyanogenmod 4.4.4 RC3+
  • RC3 Maintenance updates + additional improvements built by klinkone and kengnatural

cm-11-20161028-UNOFFICIAL-kylessopen

The changelog of the latest build:
  • Latest security updates
  • Fixed OMX bug which did not allow the latest version of Viber app to work.
  • ART compile timeout increased to allow large program to be installed.
For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:

Previous build:

cm-11-20160305-UNOFFICIAL-kylessopen
  • default cpu governor set to ondemand and min. cpu freq. set to 245 MHz by default
  • default minfree settings changed to avoid hanging of the phone when zram is full;
  • ART fix for gcc-4.8 (thank to JustArchi)
  • BLN support without external app (button backlights are used as notification leds)
  • fixed front camera preview hanging after taking a picture
  • initial fix of facebook app video codec issue (still buggy)

For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:

cm-11-20160305-UNOFFICIAL-kylessopen-physical-primary

This build is the same as cm-11-20160305-UNOFFICIAL-kylessopen ROM with the following differences:
  • physical-primary configuration
  • experimental high vm.dirty_ratio setting for improving i/o speed


Old changelogs

20160207 changelog:
-mounting the "hidden" partition disabled
-obsolete start() and startvm() returned back to support xposed again
-fixed soft reboot issue when bluetooth is switched off and user sends some file using it

20160205 changelog:
-bluetooth soft reboot fixed by kengnatural
-theme uninstall soft reboot fixed by kengnatural
-available ram is 645mb (~20mb more which is as stock)

20160105 changelog:
-zram and zcache updated + fixed
-zram reduced to 128mb
-added missing things for low ram config according to: https://source.android.com/devices/tech/config/low-ram.html
-user friendly f2fs support
-ramdisk ext4/f2fs double entries for /data and /cache
-initial BLN (capacitive keys act as notification LED)
-some cleanup in device tree
-removed cm-updater (obvious why)

20151230 changelog:
-applied "JustArchi's ArchiDroid Optimizations V3 for CyanogenMod (11)" optimization level -O3
-using google's GCC4.8 for rom and kernel
-bluez updated to V5.36 thanks @Codename13 for sending the pull request

20151207 changelog:
-changed kernel repo to my fork of majonez BA2X-2.0
-xposed patch
-fstab updated
-unused 50mb hidden partition is mounted to /hidden on boot do whatever you want with it
-dalvik-cache devided system apps go to /cache/dalvik-cache user apps go to /data/dalvik-cache (saves some space in /data)
-256mb zram enabled by default

20151127 changelog:
-initial basic rc3 configuration for updated RC3+ builds
-some repos changed to up to date ones (legacymod)
-latest cm-11.0 sources of 27.11.2015 including android security-patches of 01.11.2015
-wifi reconnect working
-no systemupdateservice wakelock aka google play services wakelock battery drain etc.

S7562 Cyanogenmod 4.4.4 RC3

Changelog:
  • 1. Improved Bluetooth support
  • 2. Most kernel debug flags disabled
  • 3. Added some missing libraries
  • 4. Merged all CyanogenMod source changes
  • 5. Bugfixes

Comments:
  • I think it's a little faster than previous versions. - What do you think?
  • You can update system from RC2 without wipe your phone.
  • You can enable "Force high-end graphics". Mostly, animations are smooth.
  • I ask everyone, who have bluetooth accessories to test the bluetooth layer, and provide feedback what is working or not (just with log cats).

ROM: cm-11-20150323-UNOFFICIAL-kylessopen-RC3.zip

Old Releases
S7562 Cyanogenmod 4.4.4 RC2 - download count close to 1k

Changelog:
  • 1. Backported Bluetooth driver and Management Interface from Linux Kernel v.3.13
  • 2. Newest Bluez 5.28 Bluetooth stack
  • 3. Few bugfixes to wireless driver
  • 4. All RC1 updates included

You must wipe your phone before upgrade to RC2!

ROM: cm-11-20150309-UNOFFICIAL-kylessopen-RC2.zip

kernel_kylessopen_RC2_v2.zip This update solves bluetooth wakelock issue, so the phone can go to deep sleep.
bluetooth_startup_fix.zip This update solves the system crash at startup.

KlinkOnE's kernel based on RC2_v2 with F2FS support: ==>

S7562 Cyanogenmod 4.4.4 RC1 - downloaded more than 1k times

Changelog:

ROM: http://uploaded.net/file/pionx3a0 mirror: cm-11-20150205-UNOFFICIAL-kylessopen-RC1.zip
Updates for RC1 (flash with TWRP):
browser_fix.zip
signal_strength_fix.zip
torch_fix.zip
CameraFIX_v2.zip This will fix the front and back videocamera. Before install this, disable Viber's videoConverterService with DisableService app (Play Store).
If your battery quickly discharges on RC1, disable all bluetooth service (org.codeaurora.bluetooth, Bluetooth Share) with DisableService (Play Store).

Comments:
  • Working Radio Interface Layer for both SIM card
  • WiFi direct is not supported, so you can't enable. Use Bluetooth, Dropbox, email etc...
  • If you want to install Viber, before the first start, disable Viber's videoConverterService with DisableService app (Play Store).
  • The "OneL+ Lollipop" theme with "IdeaL Theme Dark"'s icons is beautiful.
  • To prevent sound disruption, enable the equalizer.

About Google Apps, and GService Bug
  • Fixed with all releases after rc3. For reference see below
  • Latest gapps (ver. 7.x) has issues, and eat our baterry, so I recommend to install the package that I linked, disable autoupdate in Gapps, and disable GPlay's CheckWifiAndAutoUpdate service with DisableService (from Play Store).
  • If your Gservices app updated to the version 7.x, you can easily downgrade to 6.x
    (you can do this, if you installed my linked package or earlier):
    1. Settings-->Security-->Device Administrators-->Uncheck "Android Device Manager"
    2. Settings-->Apps-->Google Services-->Disable-->Yes, you want to remove updated version
  • Recommended gapps: pa_gapps-modular-pico-4.4.4-20150117-signed.zip

Future:
  • bugfixes

XDA:DevDB Information
[CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4, ROM for the Android General

Contributors
m4jonez, KlinkOnE, kengnatural
Source Code: https://github.com/majonez

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x

Version Information
Status: Beta

Created 2015-03-27
Last Updated 2016-12-06
 

Attachments

  • Screenshot_2015-02-04-00-54-43.png
    Screenshot_2015-02-04-00-54-43.png
    246.1 KB · Views: 91,100
  • Screenshot_2015-02-04-00-55-35.png
    Screenshot_2015-02-04-00-55-35.png
    33.5 KB · Views: 86,907
  • Screenshot_2015-02-09-07-44-22.png
    Screenshot_2015-02-09-07-44-22.png
    83.1 KB · Views: 82,380
Last edited:

m4jonez

Senior Member
both link response ... "ERR_CONNECTION_REFUSED"
the link about the sammobile firmware works

Maybe this site is blocked for you by your ISP or your DNS server is not serving this domain.
Try to set DNS servers for your computer to 8.8.8.8 and 8.8.4.4 (Google DNS).
Or use TOR browser.
 
Last edited:

GiannisSma

Senior Member
Apr 17, 2014
271
64
I try the rom with EUR XXBML1 firmware and the ril doesn't work. If I have time i will try the rom again with the Hungary firmware. And something more, we will have update for those that don't work??
 
  • Like
Reactions: charantej47

AxE_09

Senior Member
Mar 23, 2013
97
28
Hey

Hi, Thanks. just wanted to know if one sim card works or 2 are required??
 

tbiwalkar

Senior Member
Mar 4, 2014
262
50
Kalyan
OnePlus 2
OnePlus 5
You Nailed it bro! @m4jonez

YES! 100% Verified that we get network on both (you can insert single as well) .
However that the rom is a bit laggy (much better than one would expect from a first build).
Yes there are bugs ! but yeah! there is network too..
Where should we report the bugs bro @m4jones? I found some.
1 network on indian modem is super duper unstable.. so change op and recomended people to flash your modem file.
With your modem , i found the sim networks to be quite stable.
2 torch app is useless as neither app nor widget works. So fix it or remove it
( CAMERA WORKING FINE FOR ME)

COngrats and all the best ! continue your good work :)
 

KlinkOnE

Senior Member
Oct 13, 2013
743
639
GDR
minor problem here:
Signal strength is reported wrong for both sims.
Always shows full strength.
Recognition seems to be working as values are changing but they are much too high. Around 2000dBm.

Phone calls in/out SMS and data rock stable on both sims for me.
Performance is good(better than expected).
Zram is not working init.rc entries(or script) are missing. Maybe a kernel problem too idk ATM.

Thanks @m4jonez you're great!!!!!

Gesendet von meinem GT-S7562
 
Last edited:

m4jonez

Senior Member
minor problem here:
Signal strength is reported wrong for both sims.
Always shows full strength.
Recognition seems to be working as values are changing but they are much too high. Around 2000dBm.

fixed.

Perhaps it will help you to fix the flashlight in this time and the future.
http://xdaforums.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267

It was just a path issue with Torch. Fixed.
 
Last edited:

naikaniket.23

Senior Member
Mar 6, 2014
63
10
Pune
Step by Step Guide

Please provide step by step installation guide & few more after installation photos.
 
Last edited:

criska

Senior Member
Jul 24, 2013
112
74
Mumbai
Review !!

Great Work !!:laugh::good: @m4jonez . Love to have a Cm Rom for our device :D

My thougts :

1) Battery drainage is an issue..

2) Interface Performance is good but can be better ( can't expect more from Rc1 ) :p

3) Need a good overclocked Kernel !!

:):):) THANKS A TON :):):)

One Question ........Is lollipop next :fingers-crossed::p ( kidding )
 
  • Like
Reactions: pitake

Top Liked Posts

  • There are no posts matching your filters.
  • 182
    logo.png

    Samsung GT-S7562 CyanogenMod 11.0 Android 4.4.4

    Unofficial Release


    I proudly present my first Android related work.
    The GT-S7560M has a similar hardware except the dual-SIM RIL, so the kylessopen firmware (thanks to jonypx09 and others) was a good initial source.
    I reverse engineered the stock Java Radio Interface Layer, and based on that informations, I restructured the kylessopen’s sources.
    Finally with my custom telephony-common, telephony-msim java layer, and with the stock rild, and libril*.so binaries, the GSM connection works.

    Important: This is an unofficial release. If you find a bug, please send a feedback in this thread.
    If you have a problem with the installation, write it down in the Q&A thread.


    Compatibility:
    • S7562, S7562L supported.
    • S7562_C_, S7562_i_ are not supported. Don't flash on it, otherwise you will brick your phone.

    Issues:
    • Video Encoding has bugs.
    • Camera is only 3Mpx.
    • FM radio not supported.
    • WiFi not works on L version, I need a tester.

    Requirements:
    • TWRP Recovery latest (3.0.2) recommended
    Installing TWRP method when no custom recovery is installed at all:
    • 1. Download Odin flashable TWRP .tar to your PC
    • 2. Reboot to download mode and flash TWRP with Odin
    • 3. Reboot to TWRP recovery using VolUP+VolDN+Home+Power keycombo
    • 4. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
    • 5. proceed with cm Installation
    Installing TWRP method when custom recovery cwm or twrp is already installed:
    • 1. Download the latest Recovery flashable TWRP .zip package to your device
    • 2. Reboot to custom recovery and flash TWRP .zip
    • 3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
    • 4. proceed with cm Installation

    CM11 Installation method:
    • 1. Download the latest cm11 package to your device
    • 2. Reboot to TWRP recovery.
    • 3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important.
    • 4. Make a factory-reset / Wipe your phone (everythig except SDCARD) important to prevent bootloops
    • 5. Install Unofficial CM11 with TWRP (Uncheck zip file verification before install).
    • 6. Reboot and configure your system
    • optional. If you are going to use gapps, reboot to TWRP recovery, flash gapps.
    • optional. If your mobile Connections are not working Flash the hungarian modem using TWRP recovery

    Download links:

    Hungarian Modem: Modem_S7562XXLJ3.zip Recovery flashable
    Odin v3 for Windows: Odin3_GT-S7562.zip
    Recovery - TWRP 3.0.2: recoveryTWRP302 Recovery flashable
    Recovery - TWRP 3.0.2: recoveryTWRP302 Odin flashable
    Latest version of gapps - opengapps.org. Select ARM as platform, select 4.4 as Android. As variant "pico" is recomended.
    Stock Hun Firmware: S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.7z


    S7562 Cyanogenmod 4.4.4 RC3+
    • RC3 Maintenance updates + additional improvements built by klinkone and kengnatural

    cm-11-20161028-UNOFFICIAL-kylessopen

    The changelog of the latest build:
    • Latest security updates
    • Fixed OMX bug which did not allow the latest version of Viber app to work.
    • ART compile timeout increased to allow large program to be installed.
    For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:

    Previous build:

    cm-11-20160305-UNOFFICIAL-kylessopen
    • default cpu governor set to ondemand and min. cpu freq. set to 245 MHz by default
    • default minfree settings changed to avoid hanging of the phone when zram is full;
    • ART fix for gcc-4.8 (thank to JustArchi)
    • BLN support without external app (button backlights are used as notification leds)
    • fixed front camera preview hanging after taking a picture
    • initial fix of facebook app video codec issue (still buggy)

    For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:

    cm-11-20160305-UNOFFICIAL-kylessopen-physical-primary

    This build is the same as cm-11-20160305-UNOFFICIAL-kylessopen ROM with the following differences:
    • physical-primary configuration
    • experimental high vm.dirty_ratio setting for improving i/o speed


    Old changelogs

    20160207 changelog:
    -mounting the "hidden" partition disabled
    -obsolete start() and startvm() returned back to support xposed again
    -fixed soft reboot issue when bluetooth is switched off and user sends some file using it

    20160205 changelog:
    -bluetooth soft reboot fixed by kengnatural
    -theme uninstall soft reboot fixed by kengnatural
    -available ram is 645mb (~20mb more which is as stock)

    20160105 changelog:
    -zram and zcache updated + fixed
    -zram reduced to 128mb
    -added missing things for low ram config according to: https://source.android.com/devices/tech/config/low-ram.html
    -user friendly f2fs support
    -ramdisk ext4/f2fs double entries for /data and /cache
    -initial BLN (capacitive keys act as notification LED)
    -some cleanup in device tree
    -removed cm-updater (obvious why)

    20151230 changelog:
    -applied "JustArchi's ArchiDroid Optimizations V3 for CyanogenMod (11)" optimization level -O3
    -using google's GCC4.8 for rom and kernel
    -bluez updated to V5.36 thanks @Codename13 for sending the pull request

    20151207 changelog:
    -changed kernel repo to my fork of majonez BA2X-2.0
    -xposed patch
    -fstab updated
    -unused 50mb hidden partition is mounted to /hidden on boot do whatever you want with it
    -dalvik-cache devided system apps go to /cache/dalvik-cache user apps go to /data/dalvik-cache (saves some space in /data)
    -256mb zram enabled by default

    20151127 changelog:
    -initial basic rc3 configuration for updated RC3+ builds
    -some repos changed to up to date ones (legacymod)
    -latest cm-11.0 sources of 27.11.2015 including android security-patches of 01.11.2015
    -wifi reconnect working
    -no systemupdateservice wakelock aka google play services wakelock battery drain etc.

    S7562 Cyanogenmod 4.4.4 RC3

    Changelog:
    • 1. Improved Bluetooth support
    • 2. Most kernel debug flags disabled
    • 3. Added some missing libraries
    • 4. Merged all CyanogenMod source changes
    • 5. Bugfixes

    Comments:
    • I think it's a little faster than previous versions. - What do you think?
    • You can update system from RC2 without wipe your phone.
    • You can enable "Force high-end graphics". Mostly, animations are smooth.
    • I ask everyone, who have bluetooth accessories to test the bluetooth layer, and provide feedback what is working or not (just with log cats).

    ROM: cm-11-20150323-UNOFFICIAL-kylessopen-RC3.zip

    Old Releases
    S7562 Cyanogenmod 4.4.4 RC2 - download count close to 1k

    Changelog:
    • 1. Backported Bluetooth driver and Management Interface from Linux Kernel v.3.13
    • 2. Newest Bluez 5.28 Bluetooth stack
    • 3. Few bugfixes to wireless driver
    • 4. All RC1 updates included

    You must wipe your phone before upgrade to RC2!

    ROM: cm-11-20150309-UNOFFICIAL-kylessopen-RC2.zip

    kernel_kylessopen_RC2_v2.zip This update solves bluetooth wakelock issue, so the phone can go to deep sleep.
    bluetooth_startup_fix.zip This update solves the system crash at startup.

    KlinkOnE's kernel based on RC2_v2 with F2FS support: ==>

    S7562 Cyanogenmod 4.4.4 RC1 - downloaded more than 1k times

    Changelog:

    ROM: http://uploaded.net/file/pionx3a0 mirror: cm-11-20150205-UNOFFICIAL-kylessopen-RC1.zip
    Updates for RC1 (flash with TWRP):
    browser_fix.zip
    signal_strength_fix.zip
    torch_fix.zip
    CameraFIX_v2.zip This will fix the front and back videocamera. Before install this, disable Viber's videoConverterService with DisableService app (Play Store).
    If your battery quickly discharges on RC1, disable all bluetooth service (org.codeaurora.bluetooth, Bluetooth Share) with DisableService (Play Store).

    Comments:
    • Working Radio Interface Layer for both SIM card
    • WiFi direct is not supported, so you can't enable. Use Bluetooth, Dropbox, email etc...
    • If you want to install Viber, before the first start, disable Viber's videoConverterService with DisableService app (Play Store).
    • The "OneL+ Lollipop" theme with "IdeaL Theme Dark"'s icons is beautiful.
    • To prevent sound disruption, enable the equalizer.

    About Google Apps, and GService Bug
    • Fixed with all releases after rc3. For reference see below
    • Latest gapps (ver. 7.x) has issues, and eat our baterry, so I recommend to install the package that I linked, disable autoupdate in Gapps, and disable GPlay's CheckWifiAndAutoUpdate service with DisableService (from Play Store).
    • If your Gservices app updated to the version 7.x, you can easily downgrade to 6.x
      (you can do this, if you installed my linked package or earlier):
      1. Settings-->Security-->Device Administrators-->Uncheck "Android Device Manager"
      2. Settings-->Apps-->Google Services-->Disable-->Yes, you want to remove updated version
    • Recommended gapps: pa_gapps-modular-pico-4.4.4-20150117-signed.zip

    Future:
    • bugfixes

    XDA:DevDB Information
    [CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4, ROM for the Android General

    Contributors
    m4jonez, KlinkOnE, kengnatural
    Source Code: https://github.com/majonez

    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Beta

    Created 2015-03-27
    Last Updated 2016-12-06
    15
    What's wrong with links?

    I can download files. It is a bit slow, but works for me.
    14
    Hi everybody,

    Bluetooth-SoftReboot-Fix by kengnatural
    Bluetooth_Fix
    fixed kernel for 20160105 build
    mod_cm_160114[1]
    20160105 build
    cm-11-20160105-UNOFFICIAL-kylessopen
    f2fs capable recovery (twrp 2.8.0.1)
    recoveryTWRP28 f2fs
    BLN control app (Playstore)
    BLN control - Free

    Above linked kernel (fix) + Bluetooth_Fix has to be flashed after rom!

    20160105 changelog:
    -zram and zcache updated + fixed
    -zram reduced to 128mb
    -added missing things for low ram config according to: https://source.android.com/devices/tech/config/low-ram.html
    -user friendly f2fs support
    -ramdisk ext4/f2fs double entries for /data and /cache
    -initial BLN (capacitive keys act as notification LED)
    -some cleanup in device tree
    -removed cm-updater (obvious why)

    20151230 changelog:
    -applied "JustArchi's ArchiDroid Optimizations V3 for CyanogenMod (11)" optimization level -O3
    -using google's GCC4.8 for rom and kernel
    -bluez updated to V5.36 thanks @Codename13 for sending the pull request

    20151207 changelog:
    -changed kernel repo to my fork of majonez BA2X-2.0
    -xposed patch
    -fstab updated
    -unused 50mb hidden partition is mounted to /hidden on boot do whatever you want with it
    -dalvik-cache devided system apps go to /cache/dalvik-cache user apps go to /data/dalvik-cache (saves some space in /data)
    -256mb zram enabled by default

    20151127 changelog:
    -initial basic rc3 configuration for updated RC3+ builds
    -some repos changed to up to date ones (legacymod)
    -latest cm-11.0 sources of 27.11.2015 including android security-patches of 01.11.2015
    -wifi reconnect working
    -no systemupdateservice wakelock aka google play services wakelock battery drain etc.

    for f2fs:
    -you dont have to use it theres no problem staying on ext4 formatted partitions
    -/data and /cache can be used formatted to f2fs (should be used together)
    -above linked twrp recovery is needed and must be flashed beforehand
    -make a backup
    -go to wipe and choose partition e.g. /data
    -choose change/repair filesystem choose f2fs
    -restore /data backup and boot
    -same for cache but without restoring

    for BLN:
    -initial and very simple implementation but working
    -above linked app can be used to control it
    12
    Hi all,

    I bought a One M7 a few weeks ago to replace this slow hardware, and I sold the GT-S7562 on last Friday.
    So I won't release any future updates for this ROM.
    Thank you for the feedbacks and the lot of thanks.

    Have a nice day,
    András
    12
    both link response ... "ERR_CONNECTION_REFUSED"
    the link about the sammobile firmware works

    Maybe this site is blocked for you by your ISP or your DNS server is not serving this domain.
    Try to set DNS servers for your computer to 8.8.8.8 and 8.8.4.4 (Google DNS).
    Or use TOR browser.