Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,805,892 Members 43,018 Now Online
XDA Developers Android and Mobile Development Forum

Micromax Unite 2 A106 8GB ROM Repartition Guide...MT6582M.. (FOR 8 GB version only..)

Tip us?
 
trueamrit
Old
#81  
trueamrit's Avatar
Junior Member
Thanks Meter 1
Posts: 4
Join Date: Jun 2014
Okk i will try...

Sent from my Micromax A106 using XDA Free mobile app
 
Open Mind
Old
#82  
Junior Member
Thanks Meter 1
Posts: 4
Join Date: Aug 2014
Successfully did all things in one go i.e. 1. Took Readback, 2. Did Rooting n installed Custom Recovery, 3. Backedup NVRAM (i.e. IMEI and Baseband), 4. Took Nandroid Backup, and 5. Finally Repartitioned of 5-1 G.B. without any type of problem during the process.

Thanks to developers especially Kiran Anto, Sudeep Duhoon and Sagarwep for providing Good Guide and Tools.

I took time and read all their thread including problem faced by others and understood where is the flaw and there are minor left out in the guides but I thank them from the bottom of my heart. They spent so much time for us and did so much. I will try to upload the detailed guide step wise for each of the above 5 Tasks also covering those flaws due to which others are facing problem. Not uploading now as before 10 posts i can't upload any link as per rules which is a major problem.

Regards and Thank You,

By - OPEN MIND


Quote:
Originally Posted by Kiran Anto View Post
Hi Guys,

This is my first thread here in xda-developers.. so please support and encourage...
I present to you the re-partitioning guide for micromax unite 2 a106 8 gb edition.....






Preperations :-


1. First Take a Nandroid Backup of your existing rom....

2. Then take a Readback of your device......(skip if it is done earlier.)

3. Take IMEI/Baseband backup of your phone..

Things Required :-

1. Common Sense

2. Backup

3. Micromax Unite 2

4. SP flash Tools

5. PC

5. EBR files

6.....goes on...


Actual Steps :-


1. Download the EBR Files and scatter files from here....

2. Download SP Flash Tools..

3. Install MT6582M drivers

4. Open Sp flash tools and load up the scatter files...

5. Select EBR1 and link the ebr1 file and do the same for ebr2

6. Now click download

7. Connect your phone without battery (Switched off)

8. You should see a tick mark and success message...then disconnect your phone and boot again...

9. If it boots up properly you are good to go..or else just restore the Nandroid backup you took... and you would get a re partitioned phone..

* if the internal sd card after formatting gets mounted as read only... then go to ctr recovery and wipe cache and wipe dalvik cache and reboot the phone... everything will be alright... after all your apps get optimized
10. Hit Thanks for me...


DOWNLOADS :-

1. SP Flash Tools

2. Scatter Files

3. EBR FILES ( Phone storage - 6 GB | Internal storage - 0 GB )

4. EBR FILES (Phone Storage - 2.36 GB | Internal Sd - 3.67GB

5. EBR FILES (Phone Storage - 4.70 GB | Internal Sd - 246 MB )

6. EBR FILES (Phone Storage - 5.16 GB | Internal Sd - 821 MB ) with scatter files and screenshots
*** NEW Recommended by me..


UPDATE : All these are tested by me and some xda members.... like gauravbirla,johny eros etc.......

IF IT HELPED YOU PLEASE DONATE SOMETHING... NOW THAT'S AN ENCOURAGEMENT

SCREENSHOTS

EBR FILES (Phone Storage - 2.36 GB | Internal Sd - 3.67GB screenshot by gauravbirla




EBR FILES (Phone Storage - 4.70 GB | Internal Sd - 246 MB ) screenshot by Anto Chacko



EBR FILES (Phone Storage - 5.16 GB | Internal Sd - 821 MB ) screenshot by ME (Kiran ANto)



if you want any other combination .. please feel free to ask me..
soon... im gonna upload a guide to do this... ..
HIT Thanks button if it Helped you .......


IF IT HELPED YOU PLEASE DONATE SOMETHING... NOW THAT'S AN ENCOURAGEMENT

IF IT HELPED YOU PLEASE DONATE SOMETHING... NOW THAT'S AN ENCOURAGEMENT
The Following User Says Thank You to Open Mind For This Useful Post: [ Click to Expand ]
 
MillionSwords
Old
(Last edited by MillionSwords; 13th September 2014 at 06:47 PM.)
#83  
Junior Member
Thanks Meter 0
Posts: 5
Join Date: May 2013
Wink a little polite man

Quote:
Originally Posted by Kiran Anto View Post
Actually you can.......
if you flash 16 gb ebr files you will get 16 gb of space...
if you want 1 tb of space.... you flash it.... thats what big companies do.. those who dont know this trick suffers with a low space error....
if the hardware is not present .. it will be automatically created.... android kitkat comes with a 3d printer inside it so that it can print internal sd and other stuff like ram... when you want it....
...
seriously.... why do you even ask this kind of questions.??

i understand u r annoyed but lets be little polite to noobs
 
rohit27590
Old
#84  
Junior Member
Thanks Meter 2
Posts: 7
Join Date: Mar 2013
Location: New Delhi
Here is the EBR files that i am using
On my unite 2 8gb version running stock rom.

Phone storage: 5.68 gb
Internal sd:2.17

https://drive.google.com/folder/d/0B...xRb2xWYlU/edit


Sent from my Micromax A106 using Tapatalk 2
 
Kiran Anto
Old
(Last edited by Kiran Anto; 14th September 2014 at 06:00 PM.)
#85  
Kiran Anto's Avatar
Member - OP
Thanks Meter 52
Posts: 58
Join Date: Jun 2014
Location: irinjalakuda

 
DONATE TO ME
Quote:
Originally Posted by rohit27590 View Post
Here is the EBR files that i am using
On my unite 2 8gb version running stock rom.

Phone storage: 5.68 gb
Internal sd:2.17

https://drive.google.com/folder/d/0B...xRb2xWYlU/edit


Sent from my Micromax A106 using Tapatalk 2
that is indeed a great work...
but my question is how ???
how you managed to make that...
its not right....
lemme tell you ..
5.68 + 2.17 = 7.85
now remaining is only 0.15 GB
..
but the system.. kernel and other partitions need more than 150 mb right ??
correct me if im wrong...
titanium backup shows that 900 mb for rom...kernel...etc
so total on adding it becomes more than 8 gb..
how is it even possible ???

--
anyways ive tried it.. its great..
lemme update the original thread...
also try to make a flashable zip ....


----

Here it is .. ive uploaded a flashable zip... you can now flash it in cwm or ctr.... everyone who have flashed the previous one.... for them i recommend this.... this is way better..
all thanks to rohit...
HIT THANKS IF IT HELPED YOU.....

My DEVICES :-

Micromax Unite 2 4 gb Edition
Micromax Unite 2 8 Gb Edition


MY WORKS :-

Micromax Unite 2 A106 8 Gb Version .. Re partitioning Guide.. Also for all MT6582M Devices...

DONATE IF IT HELPED YOU
 
rohit27590
Old
#86  
Junior Member
Thanks Meter 2
Posts: 7
Join Date: Mar 2013
Location: New Delhi
@kiran bro actually i am not much into hex editing.I simply used ebrtweak utility to create those EBR files..
Here is the utility link.

https://docs.google.com/file/d/0B0AB...p=docslist_api

U can verify urself whether the partition created by this utility are right or not.
From last 10-12 days i am using those partitions till now everything appears to be working f9..

Sent from my Micromax A106 using Tapatalk 2
Tags
micromax a106 unite 2, micromax unite 2, repartition
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes