Post Reply

[QMobile i9][KitKat 4.4.2] Installation + Root + Custom KitKat

OP qwerfaseeh

3rd August 2014, 09:09 AM   |  #1  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
Quote:

Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.

Quote:

New QMobile i9 Users


Click Here First

Quote:

IMEI / NVRAM Backup


Method 1:

Before Installing the KitKat Follow These Steps.

1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.

Method 2 (In Case No IMEI Backup):

1.Be patient and it will fix your imei
2.Download the IMEI_WINDOWS.zip from here
3.Extract the contents to C:\Users\Username (Current User)
4.Open command promp and cd to the IMEI_WINDOWS folder
5.Now type "imei.exe 123456789111111 123456789111111" without quotes
6.Just replace both the 15 digit numbers with your IMEI 1 and IMEI 2 respectively
7.Now a file named "MP0B_001_NEW" will be generated in your IMEI_WINDOWS folder
8.Just rename it to "MP0B_001"
9.Now download the IMEI_FLASHABE.zip from here
10.Extract this zip and go to "/data/nvram/md/NVRAM/NVD_IMEI/"
11.Delete the placehere file and paste your "MP0B_001" file here
12.Now zip the META-INF and data folder and flash it with recovery
13.You have to flash this after you see imei error on your 1st boot
14.Don't flash directly after the ROM, just do your first boot then flash it.

Method 3 (In Case No IMEI Backup):

1.Download IMEI Repair Tool
2.Download Support Files
3.Instructions To Follow

Quote:

QMobile KitKat Release


Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.

Video Tutorial (Not in English just watch the video and follow)

Smart Phone Flash Tool and Driver

Firmware Download

1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And Add It In Firmware Folder Now Load It, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done.
10. Enjoy Official Noir i9 KitKat.

Quote:

Rooting Method

1. Just Install The Attached Zip named "4.4 Root.zip" or "subbinst-signed.zip" Via Recovery.

Quote:

MyPhone KitKat Release


Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.

Trust yourself you can do it!.

Video Tutorial (Not in English just watch the video and follow)

Smart Phone Flash Tool and Driver

Firmware Download

1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done.
10. Enjoy KitKat.

Quote:

Rooting Method

1. Just Install The Attached Zip named "4.4 Root.zip" Via Recovery.

Quote:

MMX KitKat Release


Video Tutorial

1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.

Quote:

Rooting Method

1. Just Install The Attached Zip named "subbinst-signed.zip" Via Recovery.

Quote:

Custom ROM "Classic Kat" by Me


Click Here

Quote:

Custom Rom Based On MMX


Custom Rom v3

1.Place ROM Zip File in your sdcard
2.Wipe data/factory reset
3.Wipe dalvik cache
4.Flash ROM from sdcard
5.Flash subbinst-signed.zip from attachment to get root access.
6.Enjoy a Proper and Stable KitKat
7.Download and Flash FILE_MANAGER.zip to remove error in the File Manager.
8.If no engineering mode in your cell phone then download engineermode.apk and copy/paste in system app via Root Explorer

Quote:

Increase App Storage



Use it only on MMX KitKat Release and on Custom ROM based on MMX. Not with MyPhone KitKat Release.

Step 1: Download "Internal APP storage (4GB MMXKK).zip" from bellow
Step 2: Extract the file
Step 3: Open SP Flash tools
Step 4: Add scatter file
Step 5:Select EBR1 and EBR2
Step 6: Click on Download
Step 7:Remove the battery from your Canvas 2 colors
Step 8:Connect your phone to pc via data cable
Step 9:wait for the completion of Flashing Process
Step 10:Reboot your Phone
Step 11:Pull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage....

Quote:

Revert Back To JellyBean i9 Official



Video Tutorial (Not in English just watch the video and follow)

Smart Phone Flash Tool and Driver

Firmware Download

1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips. 1 file is missing in the firmware zip which is attached below named secro.img, add it in the firmware folder before proceed.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, wait till all files to load.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done.
10. Enjoy Stock JellyBean.

Quote:

Add-ons


Click Here

Quote:

Plese Hit thanks button if I helped you!



Quote:

Frequently Asked Question (FAQ)



1. After I upgrade into kitkat firmware, can I downgrade again to Jellybean?
-Just flash dump rom of jellybean using spft.

2. I back up in CWM, Can I restore this in Kitkat version?
-No!

3.May I ask if we have custom recovery available for our kitkat version?
-Yes CTR

Credits
INCPAK
Biswajyoti
CallMeX!!
umangleekha
Attached Files
File Type: zip subbinst-signed.zip - [Click for QR Code] (5.17 MB, 427 views)
File Type: img recovery.img - [Click for QR Code] (6.35 MB, 359 views)
File Type: zip IMEI_FLASHABLE.zip - [Click for QR Code] (151.7 KB, 133 views)
File Type: zip IMEI_windows.zip - [Click for QR Code] (7.2 KB, 106 views)
File Type: zip Internal_APP_storage_(4GB_MMXKK).zip.zip - [Click for QR Code] (1.6 KB, 171 views)
File Type: img secro.img - [Click for QR Code] (6.00 MB, 161 views)
File Type: apk EngineerMode.apk - [Click for QR Code] (976.2 KB, 126 views)
File Type: zip 4.4 Root.zip - [Click for QR Code] (545.6 KB, 446 views)
File Type: txt [Megafileupload]MT6582_Android_scatter.txt - [Click for QR Code] (6.8 KB, 220 views)
Last edited by qwerfaseeh; 26th October 2014 at 05:17 AM.
The Following 9 Users Say Thank You to qwerfaseeh For This Useful Post: [ View ]
3rd August 2014, 01:02 PM   |  #2  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
More Custom KitKat ROMs
Quote:

You Must Be On KitKat To Flash These ROMs

Quote:

ROM Links JellyBean 4.2

1. Huawei Honor 3C
2. Galaxy s5

Quote:

ROM Links KitKat 4.4

1. KitKat Fresh v3 (4.4.2)
2. KitKat Emotion UI (4.4.2)
3. SlimKat Themed KitKat (4.4.4)
4. AOSP KitKat ROW (4.4.2)
5. Lenovo KitKat (4.4.2)
6. Android L Themed ROM



Quote:

Procedure of Installation

1.Place Any ROM Zip File in your sdcard.
2.Wipe data/factory reset.
3.Wipe dalvik cache.
4.Flash ROM from sdcard.
5.Flash 4.4 Root.zip from attachment to get root access.
6.Enjoy.

Quote:

Add-ons

Click Here

Quote:

Note: Replace the boot.img in Fresh v3 to use Memory Card as default.

Credits
4pda.ru
Attached Files
File Type: zip 4.4 Root.zip - [Click for QR Code] (545.6 KB, 110 views)
File Type: img boot.img - [Click for QR Code] (5.63 MB, 69 views)
Last edited by qwerfaseeh; 6th November 2014 at 06:13 PM.
The Following 4 Users Say Thank You to qwerfaseeh For This Useful Post: [ View ]
3rd August 2014, 06:33 PM   |  #3  
Member
Flag Karachi
Thanks Meter: 5
 
41 posts
Join Date:Joined: Aug 2012
More
Have you tried using titanium backup, go backup or lucky patcher after root genius because when i earlier flashed kitkat these apps weren't working and i had to revert back to jelly bean.

Edit: Thanks brother, all these apps are working after root genius. You've solved a big problem for me.
Last edited by usama_92; 3rd August 2014 at 10:41 PM. Reason: Update.,.
3rd August 2014, 09:04 PM   |  #4  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
Wink Add-ons
Quote:

Add-ons

1.Best Keyboard In Town.
2a.Best Music Player In Town
2b.Music Player Add-on Patch
3.Best Camera App In Town
4.QMobile Stock Logo i9
5.Battery & Performance Patch

Quote:

Procedure

1.Place Zip File in your SDCard.
2.Reboot Into Recovery.
3.Flash zip from sdcard.
4.Enjoy.
Last edited by qwerfaseeh; 19th September 2014 at 05:03 PM.
The Following 2 Users Say Thank You to qwerfaseeh For This Useful Post: [ View ]
8th August 2014, 04:27 PM   |  #5  
najamahmedisb's Avatar
Senior Member
Flag islamabad
Thanks Meter: 1
 
102 posts
Join Date:Joined: Jul 2013
More
root genius failed.....when I flash CWM recovery it says PMT changed for rom
8th August 2014, 08:24 PM   |  #6  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
I alreay told in the post that flash the recovery with the ROM by replacing the included recovery
The Following User Says Thank You to qwerfaseeh For This Useful Post: [ View ]
8th August 2014, 08:39 PM   |  #7  
najamahmedisb's Avatar
Senior Member
Flag islamabad
Thanks Meter: 1
 
102 posts
Join Date:Joined: Jul 2013
More
sorry my bad...tnks 4 reply
8th August 2014, 08:39 PM   |  #8  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
Always welcome
8th August 2014, 08:41 PM   |  #9  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
If you want to ask any question please ask on this forum only. Thanks
Last edited by qwerfaseeh; 17th August 2014 at 11:52 AM.
The Following User Says Thank You to qwerfaseeh For This Useful Post: [ View ]
8th August 2014, 09:29 PM   |  #10  
qwerfaseeh's Avatar
OP Senior Member
Flag Sialkot
Thanks Meter: 121
 
355 posts
Join Date:Joined: Feb 2012
More
New i9 users must check this link

http://forum.xda-developers.com/show....php?t=2836748

The Following User Says Thank You to qwerfaseeh For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes