Post Reply

[Q] [HELP] understand my logcat

OP elidoe89

20th August 2014, 11:11 AM   |  #1  
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Aug 2012
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?

Quote:

--------- beginning of /dev/log/main

I/Resize ( 86): The size of data already meet the request.

I/Resize ( 86): Partition has been resized,so nothing to do!

D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')

D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()

D/ADB_SERVICES( 158): adb_main(): post init_jdwp()

D/ADB_SERVICES( 158): Event loop starting

D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')

I/ADB_SERVICES( 158): transport: usb

D/ADB_SERVICES( 158): transport: (null) registered

D/ADB_SERVICES( 158): transport: (null) (16,17) starting

W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17

W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)

D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000

W/ADB_SERVICES( 158): (null): transport SYNC online

E/ccci_mdinit(0)( 121): md_init ver:1.00

E/ccci_mdinit(0)( 120): md_init ver:1.00

I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)

I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628

I/6620_launcher( 117): index:1, chipId:0x6628

I/6620_launcher( 117): chiId:0x6628

I/6620_launcher( 117): index:1, chipId:0x6628

I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module

I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg

I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg

I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found

I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed

I/6620_launcher( 117): index:1, chipId:0x6628

I/6620_launcher( 117): STP Mode is not set, fetching default mode...

I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)

I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg

I/6620_launcher( 117): keyro.build.type)-valueuser)

I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/

I/6620_launcher( 117): Common Interface: UART mode

I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/

I/6620_launcher( 117): Common Interface: UART mode

I/6620_launcher( 117): uart name ttyMT2

D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!

D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x

D/MsensorDaemon( 151):


D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x

D/MsensorDaemon( 151):


D/MsensorDaemon( 151): start_msensor_demon


D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES

E/MsensorDaemon( 151): [99] ''

D/permission_check( 145): permission check ver:0.01

D/permission_check( 145): Empty, not decrypt!

D/permission_check( 145): change_md_nvram_attr++

--------- beginning of /dev/log/system

E/POAD ( 155): boot_mode = 0

E/POAD ( 155): update boot reason = 0

D/permission_check( 145): new_ver file exist!!!

D/permission_check( 145): change_md_nvram_attr--0

I/stp_dump( 143): ==>main

I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed

E/stp_dump( 143): [STP_DBG] family id = 19

I/stp_dump( 143): sending dummy command

I/stp_dump( 143): set sock number to 9

I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp

I/stp_dump( 143): Using existing control interface directory.

E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed

I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')

I/stp_dump( 143): chown (/data/misc/stp_dump) succeed

I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed

E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use

E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination

D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'

I/stp_dump( 143): set sock number to 10

I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.

I/stp_dump( 143): ==>main222

I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory

D/wlanLoader( 144): checkSupport 0x6628

D/wlanLoader( 144): Match 0x6628

D/wlanLoader( 144): Get the correct chip version mt6628

D/wlanLoader( 144): Get chip Version mt6628.

D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko

D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES

D/MsensorDaemon( 151): memsicd3416x running

D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!

D/MsensorDaemon( 151): open demon attr err = No such file or directory

E/stp_dump( 143): table == NULL || table->table == NULL

E/stp_dump( 143): table == NULL || table->table == NULL

D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko

I/thermal_repeater( 154): START+++++++++ 154

I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid

I/thermal_repeater( 154): Fail to chmod ffffffff

I/thermal_repeater( 154): Enter infinite loop

I/AEE/AED ( 122): Built Jan 30 2013 19:35:15

D/AEE/AED ( 122): ChangeAEEWorkMode: 3

I/AEE/AED ( 122): AED config

I/AEE/AED ( 122): mode '3'

I/AEE/AED ( 122): exp level '1

I/AEE/AED ( 122): dal enable '0'

I/AEE/AED ( 122): db count '20'

I/AEE/AED ( 122): db storage '1'

I/AEE/AED ( 122): SMP Info => 1

I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread

I/MobileLogD( 123): mobilelog start after boot, mode:0

D/MobileLogD/cache( 123): init cache configure items....

D/MobileLogD/cache( 123): value of ro.build.type:user.

I/installd( 140): installd firing up

D/PQ ( 130): PQ init start...

D/PQ ( 130): PQ test...

I/ ( 137): ServiceManager: 0x41661698

D/PQ ( 130): PQ init end !

E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory

E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory

V/AEE/AED ( 122): ETB buffer length = 512

I/AEE/AED ( 122): wdt_status = 2, fiq_step=0

I/AEE/AED ( 122): reboot_reason = 0

V/AEE/AED ( 122): ETM start

D/installd( 140): LBE is enabled, starting...

D/NVRAM ( 152): NvRAMAgent created

E/NVRAM ( 152): Haman, serviceManager work well

D/NVRAM ( 152): NvRAMAgent Service is now ready

I/DPFD ( 149): [DPFD] main start ...

I/DPFD ( 149): [DPFD] set priority to RR:268435540

I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread

D/DPFD ( 149): [DPFD] Wait Request.....

I/DMAgent ( 147): DMAgent created

I/DMAgent ( 147): [DMAgent]register OK.

D/DMAgent ( 147): DMAgent Service is now ready

D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog

E/installd( 140): Failed to load liblbesec.so

I/installd( 140): add service shelld success!

W/installd( 140): service start entry 'shelld', flag :0

W/installd( 140): starting 'shelld'

E/ccci_fsd(0)( 118): md_fsd Ver:v1.00

I/Hald ( 133): Hald 1.1011 starting

D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).

D/ccci_fsd(1)( 118): Check OTP...

D/Hald ( 133): Create ResetManager

D/Hald ( 133): Size of initial message: 6

D/Hald ( 133): [MTK_WIFI] family id = 20

D/Hald ( 133): Reset Manager Prepare Dummy command

D/Hald ( 133): Reset Manager Send Command for binding

D/Hald ( 133): Start ResetManager

E/ccci_fsd(0)( 119): md_fsd Ver:v1.00

E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).

D/MobileLogD/cache( 123): config autostart=0 same as current value

D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value

D/MobileLogD/cache( 123): config logsize=300 same as current value

D/MobileLogD/cache( 123): config AndroidLog=1 same as current value

D/MobileLogD/cache( 123): config KernelLog=1 same as current value

D/MobileLogD/cache( 123): config BTLog=1 same as current value

D/MobileLogD/cache( 123): config BTLog=1 same as current value

E/MobileLogD/cache( 123): cant get true log path through property

E/MobileLogD/cache( 123): true path is /mnt/sdcard

D/MobileLogD( 123): create local socket server success

D/Vold ( 116): Check whether nvram restore ready!

D/NVRAM ( 128): g_i4CFG_File_Count: 25

D/NVRAM ( 128): NVM_Init Max Lid: 43

D/NVRAM ( 128): Total nvram Lid number is 43

I/Netd ( 125): Netd 1.0 starting

W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library

D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46

D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]

D/MtkAgpsNative( 142): SuplRawLog.bEnable:0

D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard

D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log

D/MtkAgpsNative( 142): SuplSslLog.bEnable:0

D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard

D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log

I/MtkAgpsNative( 142): Enter up_int_init

I/MtkAgpsNative( 142): Enter mtk_agps_up_init

D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl

W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists

D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Android Q&A, Help & Troubleshooting by ThreadRank