All actions are at your own risk!
Installation of Android 4.4.2 KitKat (by IceWell)
1 To start with need:
- Charged at least 50% of the tablet.
- Sd-card, it is still a volume.
- Established for our device driver on your Windows. I'm manipulating quietly produced from under the eighth Windows.
- Download the firmware archive and unpack: http://crewrktablets.arctablet.com/?wpfb_dl=1685
Or here: tyk
- The archive with the firmware as there is a program RKAndroidTool and program to automatically install the drivers.
- Download the archive with the kernel and the parameter and unpack in a convenient place for you: http://yadi.sk/d/aOSrg0j6RjRwN
- Download the fix for stitch and throw the stick: http://yadi.sk/d/BL_rAPsqRjUHK
- Download the format nand and throw the stick: http://crewrktablets.arctablet.com/?wpfb_dl=1429
You can fix and format nand rename for themselves, so as not to get lost.
2 Run the program RKAndroidTool.
3 Now turn off the device and holding down the Volume + connect to it USB-cable. In the program below, should appear Found RKAndroid Loader Rock Usb. If does not appear, it is likely that drivers are not installed, or the Volume + little kept clamped.
4 next to each entry in the program is a field with a null value (white rectangle). Against the item parameter click on this field empty, the window through which the parameter select the file from the downloaded archive earlier. Just do with the files and kernel boot. Get something like that
5 Push the button EraseIDB, pop up message, click OK (if after pressing the EraseIDB device turned off, then reconnect it) and press the button Run. Will start flashing process unit. After lettering Run OK tablet should boot into Recovery.
6 In the Recovery select the item install zip from internal sdcard - choose zip from external sdcard - Choose the format nand - Yes. A window appears click Next (sensor works, but also can be selected using the volume buttons and power), device memory is formatted, click Next. Again, select the item choose zip from external sdcard - Choose fix - Yes and install WARNING fix to stitch two times.
7 Press reboot system now - No - No. All device stitched.
Not quite sure why at the start vylaziet picture with penguins, and was supposed to be prestidzhio logo. Later I will try to deal with it. Just butanimatsiya itself is not very. Who has any ideas there - write
By the way this parameter under the application allocated 2 GB.
In firmware sewn CWM and root.
What was seen by me: no longer fail touch (previously occurred false touches), ceased to be chopped off wi-fi when the tablet is locked for a long time, connect to wi-fi is faster (though perhaps it seems to me).
- After starting go to settings, select the item and Performance in CPU Mode select mode Normal.
- From the Play Store Google + does not start. Work: https://mega.co.nz/#!f...XmUYne9heV4C8ooC9Qr-1I
- Hangouts for KitKat: Prestigio MultiPad 4 pmp5785c_quad Quantum - Discussion (Post # 31867844)
- Xposed for KitKat + starter pack modules: http://crewrktablets.arctablet.com/?wpfb_dl=1643
- For those who are trying to port KitKat on similar devices have a topic where guys have a very Ohm solve certain problems. Such as non-working bluetooth, Wi fi junk. Himself had read a lot of interesting here: link
Testing, evading, do not be shy.