PDA

View Full Version : o2 UK gprs settings


MADmanFREE
8th June 2003, 11:55 PM
Just installed the xda-developrs SE ROM

Seems to make the XDA run like a deamon, well impressed so far.

Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.

dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk

but something seems to be missing. Could somebody please supply the complete settings.

Peter Poelman
9th June 2003, 09:21 AM
Ehm, as far as WAP goes...

We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...

If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.

Grim_Evil
9th June 2003, 12:26 PM
Is this what you want?

Name: 02 Mobile Web

Select a Modem: Cellular Line (GPRS)

Baud rate: 19200

Advanced:

TCP/IP:

Use Server- Assinged IP Address

Name servers:

Use specific server address

DNS: 192.113.200.200

ALt. DNS: 192.113.200.201

WNS: 0.0.0.0

ALt. WNS: 0.0.0.0

Access point name:

MOBILE.02.CO.UK

Name 02 MOBILE WEB GSM

Select a modem: Cellular line

Baud rate: 19200

Advanced:

Connection perferences:

Port Settings:

Data bits: 8

Parity: NONE

Stop bits: 1

Flow Control: Hardware

TCP/IP:

Use server-assigned IP Address

X Use software compression
X Use IP header Compression

Name servers:

Use specific server address

DNS: 192.113.200.200

ALt. DNS: 192.113.200.201

WNS: 0.0.0.0

ALt. WNS: 0.0.0.0

Country code: 44

Area number: 771

Phone number: 2932932

Name : 02 WAP GPRS

Select a modem: Cellular Line (GPRS)

Baud rate: 19200

Advanced:

TCP/IP:

Use Server- Assinged IP Address

Name Servers:

Use server-assigned address

Access point: wap.02.co.uk

name: 02 WAP GSM (CSD)

Select a modem: Cellular Lime

Baud rate: 19200

Port Settings:

Data bits: 8

Parity: NONE

Stop bits: 1

Flow Control: Hardware

TCP/IP:

Use server-assigned IP Address

X Use software compression
X Use IP header Compression

Name servers:

Use server-assinged addresses


Country code: 44

Area number: 771

Phone number: 2927927

There ones I use my self:)

UK 02 XDA


:D

Gil
10th June 2003, 02:47 PM
Hi,

Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:

Username: web
Password: password
Domain: leave this blank.

Check the box to save the password.

Gil.

Grim_Evil
10th June 2003, 03:00 PM
thanks, i will add it to my txt file:)

missed those

cruisin-thru
24th September 2003, 07:22 PM
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.

littleone
11th October 2003, 07:46 AM
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! :( Thanks.

cruisin-thru
15th October 2003, 06:01 PM
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.

cruisin-thru
18th October 2003, 04:15 PM
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.

cruisin-thru
21st October 2003, 10:48 PM
Nobody in UK on O2 pay as you go :?: :?: :?:

cruisin-thru
24th October 2003, 11:31 PM
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.

alqwerty
25th October 2003, 04:43 AM
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here :)

roboutram
17th December 2003, 03:51 PM
OK, searched high and low and think this is the best thread to post this in.

Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.

I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.

One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.

Phone works and SMS is fine, just GPRS/GSM

Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:

Thanks

remlap
30th December 2003, 01:25 PM
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it

Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this

Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.

gazzaman2k
30th December 2003, 02:18 PM
im on o2 online genie payg 300 free wap/txts per month.

i got my txts down to 200 and i get 25free mms per month instead :)

i got all wap/net working for free :)

just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:

settings are:

MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent

GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201

Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online

Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'

under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'

Untick 'wtls' secured connection.

Click on the 'MMS' settings tab next.

Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)

All the other settings can be setup as you like.

1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.

2) Install EZWAP2.5

3) EZWAP Settings for O2UK:

General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default

Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default

Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N

History/Cache & Identification - default

MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number

MMS Options - delivery recepit and read receipt Y

It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.

ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk

02
username: username@o2.co.uk
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk

Hotmail
username: username@hotmail.com
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp