New Programme A - RUU 3[1].20.06 and Programme B - RSU 4[1]

[OCMAX]

Anybody wanted to upgrade asian rom? anywhere that I can upload to? pls let me know.

ROM version: 3.20.06 ENG
ROM date: 07/30/03
Radio: 4.21
Protocol: 32S54

more info : http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm


:wink: :wink: :wink: :wink:

[chatstix]

I already checked the site almost two hours ago and still I haven't got the email from 02 about the download instructions and links. Could you please send it to me (dante702@ispbonanza.com.ph). Thanks.

Anybody wanted to upgrade asian rom? anywhere that I can upload to? pls let me know.

ROM version: 3.20.06 ENG
ROM date: 07/30/03
Radio: 4.21
Protocol: 32S54

more info : http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm


:wink: :wink: :wink: :wink:

[OCMAX]

I already checked the site almost two hours ago and still I haven't got the email from 02 about the download instructions and links. Could you please send it to me (dante702@ispbonanza.com.ph). Thanks.

Anybody wanted to upgrade asian rom? anywhere that I can upload to? pls let me know.

ROM version: 3.20.06 ENG
ROM date: 07/30/03
Radio: 4.21
Protocol: 32S54

more info : http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm


:wink: :wink: :wink: :wink:

I had uploaded the file to XDA-developers ftp, You might want to wait for the RomKitchen page after they have upload there.

Good luck. :wink:

[itsme]

the bootloader contained in this rom (v6.22) has a protection similar to what
is in v5.17 : DO NOT USE IT.

better extract the os image, and then flash it with osimagetool.

[itsme]

the os rom is very similar to v3.17.03

these are the only files that have changed:

AutoConfig.exe Backup.exe USSD.exe device.exe filesys.exe gwes.exe nk.exe stk.exe

commdlg.dll coredll.dll ddi.dll fatfs.dll irsir.dll keybddr.dll ne2000.dll pcmcia.dll rilgsm.dll sd.dll serial.dll serial2.dll serial3.dll toolhelp.dll touch.dll usb.dll wavedev.dll

wince.nls

coredll-dll.sig nk-exe.sig

callwait.mid

[OCMAX]

the bootloader contained in this rom (v6.22) has a protection similar to what
is in v5.17 : DO NOT USE IT.

better extract the os image, and then flash it with osimagetool.
Woo... Luckly I haven upgrade the RUU, Only flash the RSU but in 1% fail went flashing, Anyway manage to tackle that problem and completed the flashing.

Is there any possibility that the RUU included the engaged tone missing in others OS? Hope to See it at Romkitchen soon. :wink:

[einas_canada]

Hello OCMAX,
I ahve beent "tackling" the RSU stopping at 1% for 3 days now without any success :(
Intially I thought it is the 5.22 bootloader causing the problem. Now I have 5.15 but still the same problem.
I would greatly appreciate your help in how to tackl this problem

[OCMAX]

Hello OCMAX,
I ahve beent "tackling" the RSU stopping at 1% for 3 days now without any success :(
Intially I thought it is the 5.22 bootloader causing the problem. Now I have 5.15 but still the same problem.
I would greatly appreciate your help in how to tackl this problem

Try this. After your Had sync with your PC (even the 1% screen pop-out from Your Unit it still can sync with your PC) copy this file to your PPC windows dir

MONITO~1.002
MONITO~1.003

This 2 file is in the programme B, just extract to a folder then U can find it.
after tranfer this file do a softreset or press ok from the 1% fail pop-out windows.(OK).

Good luck. :wink:

[einas_canada]

Thanks for the quick reply,
I have put the 2 folders in the main directory of windiws of my XDA but still have the same proplem, ??

[OCMAX]

Thanks for the quick reply,
I have put the 2 folders in the main directory of windiws of my XDA but still have the same proplem, ??

Did you remove your Sim card? Upgrading or downgrading? which version RSU you have? After the fail upgrade did U do any hard reset?

[einas_canada]

I did remove the SIM.
I have RSU 3.23 and I am trying to install 4.16
I didn't do a hard rest , should I?

Thanking you for the help

[OCMAX]

I did remove the SIM.
I have RSU 3.23 and I am trying to install 4.16
I didn't do a hard rest , should I?

Thanking you for the help

Yes! if U really stuck on the 1% screen everytime U do the soft reset.
It will bring U back to the previous RSU.

[einas_canada]

I see. Formatting did that for me also.
What I am trying now is to get rid of the previous RSU?
Is 4.16 considered a downgrade compared to 3.23 , I know nymbers are meaning less here since they are not done by one entity.
ANy solution now? If not, what other RSU can I try and where to download it from?

THXXXXX

[einas_canada]

will, it is a downgrade even it has a higher number

"verison date
4.16 ---- ---- 6.16 02-11-15

3.23 4.20 A.20 6.23 03-03-17 "

So I am sure many have tried to downgrade their RSU and faced the same problem of "falsh failed" after 1%

PLEASE, what is/was the solution?

OCMAX, what is the RSU that you had and what is the one you up/down graded to?

[OCMAX]

will, it is a downgrade even it has a higher number

"verison date
4.16 ---- ---- 6.16 02-11-15

3.23 4.20 A.20 6.23 03-03-17 "

So I am sure many have tried to downgrade their RSU and faced the same problem of "falsh failed" after 1%

PLEASE, what is/was the solution?

OCMAX, what is the RSU that you had and what is the one you up/down graded to?

I don't know which PDA model U are using? 900/1800 or 900/1900?

Hope this link can help U to download the RSU U wanted.
http://www.o2.co.uk/business/productsservices/xda/romupgradedownload/0,,113,00.html

[einas_canada]

Hello,
I am using 900/1800
I don't need the RSU 4.21
I have 3.25 and want 4.16, all the new ones are giving me trouble where I am now.
So, I am just trying to go around the downgrading problem.
You seem to have overcome it, so what RSU did u have and what did u downgrade it to?

THANKING YOU for your help and interest.

[OCMAX]

Hello,
I am using 900/1800
I don't need the RSU 4.21
I have 3.25 and want 4.16, all the new ones are giving me trouble where I am now.
So, I am just trying to go around the downgrading problem.
You seem to have overcome it, so what RSU did u have and what did u downgrade it to?

THANKING YOU for your help and interest.

I had the same problem downgrading before from UK 4.21 to 3.17. And my upgrade is from UK 4.21 to Asian 4.21, Went I flash the rom it fail also.

I'm using 900/1800 also. And the newest RSU for this is 4.21 asian and is very stable after the upgrade. I had waited for this new RSU for sometime. Give me your e-mail address, I can send to U if U are interested.

[Fuad]

Thank you OCMAX for the file. I did install it and I face the same problem with 1% instlation and the system reboot, may be because I did not remove the USB cable only after the upgrade begin. Any how I did follow the step you mintion by moveing the two files to the Windows dir and it works. it seems better phone singnal and I can see the G leeter for GPRS working. my system now:

ROM version 4.00.11
ROM date 06/23/03
Radio version 4.21.00
Protoccal version 32S554

Thanks again

[mikhail]

The RSU is the same as the european upgrade right? everything seems to be similar.

[mikhail]

wow! i didn't get the 1% hang! :D worked flawlessly, the upgrade that is. will test the actual calls/sms/what nots in a while.

cheerio!

[Fuad]

After my upgrade problem I mintioned above now I can link only as Guest user to my PC. How can I solve it without hard reset?

[sharkhan]

can you please send me the Asian RSU 4.21 to ivan@sh.cngb.com

Thanks
sharkhan

Anybody wanted to upgrade asian rom? anywhere that I can upload to? pls let me know.

ROM version: 3.20.06 ENG
ROM date: 07/30/03
Radio: 4.21
Protocol: 32S54

more info : http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm


:wink: :wink: :wink: :wink: