GSM to SD Backup

[swoony]

before upgrading I'll backup the original radio stack. I had used following Hardware, Software and Procedure

Serial Cable Sub9 to Qtek 1010
Tera Term V 2.3 ( 115200/8/n/1)

Flowcontrol serial Port: Hardware, Xon/Xoff tested

same results -1 hour an nothing happens - no finished Backup

Enter Bootloader ...
SDBackup ....
GSM to SD

Output from Tera Term:

************************************************** ****
InitDebugSerial using SERIAL PORT 2
************************************************** ****

HTC Bootloader for [Wallaby] Version:5.15
Copyright (c) 1998-2001 High Tech Computer Corporation
Built at: Jun 6 2002 20:29:17

CPU speed = 206 MHz
DRAM speed = 103 MHz
Hardware platform = 2; (0:DVT, 1:Pre-PV, 2:PV, 3:Panasonic LCD, 4:Reserved)
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 243328 = 121664k bytes
No legal identify flag in SD Card
Wait for turn on GSM...
GSM Turn on time = 1780 ms
FW 0:10:22>HTC UTILITIES PROGRAM FOR WALLABY


Save GSM ROM to SD
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
GSM flash backup start...

Got request time out!!
.
.
.Got request time out!!
************************************************** ****

who has an idea where the error could be

[swoony]

The same setting in Tera Term are used by backup CE to SD with following output:

************************************************** ***
InitDebugSerial using SERIAL PORT 2
************************************************** ****

HTC Bootloader for [Wallaby] Version:5.15
Copyright (c) 1998-2001 High Tech Computer Corporation
Built at: Jun 6 2002 20:29:17

CPU speed = 206 MHz
DRAM speed = 103 MHz
Hardware platform = 2; (0:DVT, 1:Pre-PV, 2:PV, 3:Panasonic LCD, 4:Reserved)
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 243328 = 121664k bytes
No legal identify flag in SD Card
Wait for turn on GSM...
GSM Turn on time = 1780 ms
FW 0:10:22>HTC UTILITIES PROGRAM FOR WALLABY


CE ROM image backup to SD
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 243328 = 121664k bytes
ImageStartAddress = A0040000
ImageEnd = A2000000
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * END
CheckSum = 0xD4DE987E
Store image to CF card successful

[cruisin-thru]

Unless you need to upgrade your radio stack or have problems with it, I would leave it alone.

[swoony]

My Prob is that GPRS Connection on other Devices (Samsung, Ericsson, Nokia) work more stable (every GPRS Connection is successful and faster as on the Qtek 1010).

The Radio Upgrade from t-mobile and O2 should increase the Speed up to 33%.

I can't find anywhere on the net my Radio Version T313 nor a Documentation about it.

I'll also will test MMS and other new features.

[Pinesio]

I have the same problem what you. I it can not make backup original radio stack. Did this be successful Ci to make ? Maybe different way on spare? I look for such RSU T313 or RSU 3.19