Problems upgrading Qtek1010 help please

[cep019]

Hi I downloaded all the software need to upgrade my qtek1010 to WM2003 everything was going well but then when it came up to the screen that displays "it will take 5 minutes to upgrade" my Qtek was restarted on its own and then the active sync connection died so then the upgrade stopped because it could not make a connection with the Qtek1010 any ideas on how to get over this restart - broken connection problem or maybe someone can guide me through upgrading using an SD card.

thank you

[Rudegar]

what i put together from a fast search in this forum

Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:

SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
BTW the above is based on using XDArit version 1.0 which can be download from the software section at:
http://www.yorch.net and a PCI USB 3-One Travel Flash reader P/N FPT-D bought at Fry's.

[cep019]

Hi Thank you very much for the reply - just need to know one more thing I have bootloader ver 5.22 will XDArit version 1 work fine with this bootloader and must I select option "5.17 and above 3,5K"