hey ,guys!I've already changed my xda2 to dopod 696 2003se

[ricky0930]

see the picture attached!
i just follow the method from the site
http://bbs.pdafans.com/viewthread.php?tid=42614
just finished by last night,and i set it to one key rotate screen using the software phm key,so cool~

[Jazzedout]

Any chance of translating this to English? :wink:

[buzz_lightyear]

@ricky0930
i just follow the method from the site
http://bbs.pdafans.com/viewthread.php?tid=42614
just finished by last night,and i set it to one key rotate screen using the software phm key,so cool

Hi ricky0930,

That thread is no more accessible... :o( looks like it was deleted.
However, I downloaded .bin ROM image from another site.

Did you get (at upgrading) an error message "Update NOT allow" ??
What was your bootloader version before upgrade?

THANX
buzz

[xdaiiuser]

where can i download it from?

[buzz_lightyear]

http://www.kenofalte.com/69602Ver.BIN

[sprint]

http://www.kenofalte.com/69602Ver.BIN 120.13 MB

[brian_bunny]

Hi ricky0930,

Could you please post all steps for upgrade?

Cheers

[ricky0930]

and the result is a totally chinese ppc even the model no change to ph10b,
since i'm at china and using chinese,i can handle all this,but if u guy want to do this, i'll post the process step by step later.

[chris_khho]

I want English Version. Somebody please!!!!!!!!!!!

[buzz_lightyear]

Steps for upgrade:

1. make SD ROM backup of your XDAII
2. using Winhex, save the content to PC
3. using Winhex, copy the first 412 bytes from the header of your backup file
4. using Winhex, paste them over first 412 bytes of the chinese ROM backup binary file and save it
5. using Winhex, write chinese ROM backup file onto your SD card
6. put the SD card in XDAII and enter bootloader mode (wait a bit)...
7. press "Power" to flash...

That's it. At the end of flashing, it will complain, that "checksum failed", but just reset and....

...I have WM2003 SE running on my XDAII!

I'm not saying too much details on how to do this and that, because if you are NOT an EXPERIENCED USER of winhex, XDAII bootloader, YOU HAVE NO KNOWLEDGE, HOW TO FLASH XDAII, THEN:

!!!!!!! D.O.N.T. D.O. T.H.I.S. !!!!!!!

If you do, it's your own risk...

buzz

[chris_khho]

I want English Version. Somebody please!!!!!!!!!!!

[ZeroXtreme]

Does anyone have access to the non-SD image of this ROM? I mean the official desktop .exe that flashes the device?

[byron_dong]

I have upgraded to 2003SE, very happy to use it, ha ha ... ...

[Anonymous]

byron,

can you explain more clearly how you can upgrade the rom? Is this a simplified or traditional Chinese rom?

Await for your reply

Chi Fai

[Anonymous]

simplified Rom
but not as the normal .exe upgrade from O2, you need
a special way to do it

[byron_dong]

byron,

can you explain more clearly how you can upgrade the rom? Is this a simplified or traditional Chinese rom?

Await for your reply

Chi Fai

hi, Chi Fai, here it is:

1. Backup ur ROM. Insert above 128MB SD, uncheck "USB connection" in ActiveSync. Using "romupdate.exe", select "\\.\WCEUSBSH001". type "d2s".

2. Using "ntrw" "read" ur ROM into PC.

3. Using winhex, replace the 0-383 byte of "69602Ver.BIN" w/ ur ROM's. May be 0-411 byte, if ur xda2 is V1.06. Mine is V1.01.

4. Using "ntrw.exe" to write ROM(2003SE) to SD.

5. Insert the SD to ur xda2, enter bootloader mode, press "Power" to flash... then reset.

5. "69602Ver.BIN" is a simplified Chinese ROM.

6. BTW, U can still get recovery by uring ur ROM SD in bootloader mode.

7. Mention above posted: "if you are NOT an EXPERIENCED USER of winhex, XDA II bootloader, YOU HAVE NO KNOWLEDGE, HOW TO FLASH XDA II, THEN: !!!!!!! D.O.N.T. D.O. T.H.I.S. !!!!!!! If you do, it's your own risk... "

Good luck! BTW, I flash mine w/ abt 20 min... will upgrade the radio to 1.18... ...

[Anonymous]

how about the radio ? and ext rom ?

[Anonymous]

Using winhex, replace the 0-383 byte of "69602Ver.BIN" w/ ur ROM's. May be 0-411 byte

I saw in few forums there is 3 number to replace

0-383
0-3xx
0-411

how do we know which one is which one

[Anonymous]

there is 2 more number also

0-368
0-399

[buzz_lightyear]

You have to replace the complete ROM image header (highlited in blue) up to HTCS checksum.
It depends on your bootloader version and device...

buzz

http://mixman.sk/ROM_header.jpg

[mamaich]

you don't need to play with SD-card:
http://forum.xda-developers.com/viewtopic.php?p=69812#69787

[Anonymous]

IF I upgrade to the new Win2003 SE

Is my Bootloader ver 1.02 also will be upg to 1.06???



** so If I use my Backup SD Rom flash back will it be back to 1.02

[Anonymous]

anyone try to upgrade to the new Version

and flash back the Offical 1.72WWE or 1.66 without problems?

[Anonymous]

C:\O2\ROM>ntrw read CEROM k:
NTRW v2.00
Removeable media
Cylinders: 0:15
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
127139840 bytes written bytes: 0
ReadFile(): CEROM -- The parameter is incorrect.


Need Help on this , after I read the ROM from my SD card
it say "ReadFile(): CEROM -- The parameter is incorrect." it that correct?

[buzz_lightyear]

@darren_the:

how about if you substitute CEROM with filename???
example:

ntrw read c:\temp\my_OSROM_backup_file.bin k:

[darren_the]

@darren_the:

how about if you substitute CEROM with filename???
example:

ntrw read c:\temp\my_OSROM_backup_file.bin k:


test other filename but still the same
no worry

I found another way to backup it

TQ :twisted:

[mamaich]

IF I upgrade to the new Win2003 SE

Is my Bootloader ver 1.02 also will be upg to 1.06???
I don't know. On my device I've logged all USB communication to a file and seen that bootrom part is skipped during update. But I already have the 1.06 booltloader. Someone have to check this with 1.02.

[darren_the]

IF I upgrade to the new Win2003 SE

Is my Bootloader ver 1.02 also will be upg to 1.06???
I don't know. On my device I've logged all USB communication to a file and seen that bootrom part is skipped during update. But I already have the 1.06 booltloader. Someone have to check this with 1.02.


Tested still on 1.02
after upgrade

[kopecek]

IF I upgrade to the new Win2003 SE

Is my Bootloader ver 1.02 also will be upg to 1.06???
I don't know. On my device I've logged all USB communication to a file and seen that bootrom part is skipped during update. But I already have the 1.06 booltloader. Someone have to check this with 1.02.

Tested yesterday. Still on 1.02. Bootloader was not upgraded....

[Asukal]

Plese let us know new chinese SIP some like chinese T9 in it?
If it was, i wish to test!

PowerWord- Chinese-English dictionary from Extended Rom was testted! nice!

[byron_dong]

have upgraded radio to 1.18.00