Genuine English WM2003 SE upgrade for Himalaya uploaded here

[dcs]

I obtained (with many thanks to fychan) a memory image of an English version of WM2003 SE which is an earlier version than the recent Chinese release, but it is genuine English. I managed to create an installable NK.nbf file from this. Also, mamaich has provided the version 1.18 Radio upgrade included here. Many thanks to mamaich for that and also for some advice when I was building the OS nbf file. Also, mamaich has provided some CAB files for Extended ROM which I have also attached here separately.

Attached is an upgrade for Himalaya devices to WM2003 SE WWE, Radio 1.18. Unzip the attachment into a folder of your choice. The nbf files are configured for operator ID O2 and language ID WWE. If you need to change these, carry out all the steps below. If they are OK for you, go straight to step 5.

Extract the decrypted versions of the nbf files by entering the following commands at the command prompt:

xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306

Modify the operator ID in the nbfs to the value you require by entering the following commands at the command prompt substituting <operator> with the required value:

xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba

Update the crc values for each of the decrypted files by entering the following commands at the command prompt:

xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba

Encrypt the files back into the nbf files by entering the following commands at the command prompt:

xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306

Place your device in the cradle, ensuring that the cradle is plugged directly into a USB port on your PC and not to a hub and that the power supply is connected to the cradle. It is also a good idea to disable any screensavers.

Run HimaUpgradeUt.exe

Sit back and wait for the Congratulations screen to be displayed on your PC. Your device will still be displaying 'Upgrading radio stack, please wait', but as long as the PC says it is done, then its all OK.

Notes: I have installed this upgrade on my XDA II without any problems, and have also been able to revert back to the 1.72 ROM I had installed previously. I have bootloader v1.01, and I don't know whether it would be any different for later versions of bootloader.

After upgrading, a hard reset takes places and the Extended ROM is installed. I found that several applications caused a 'Application may not display properly.....' message box to appear which required tapping to dismiss. Therefore, you will need to make sure that TPDisable.exe is not run in the Config.txt script in the Extended ROM, otherwise you will not be able to respond to the messages.

Edit: I've created a .BAT file which can be run from a DOS prompt to replace steps 1-4...

Usage: OperatorUpdate operatorID
where operatorID is O2 or CDL or TMOBILE, etc.

Just unzip the attached zip file.

[notepad]

Would like to check if this WM2003SE is the 'OFFICAL' English or just some 'Beta'

[Anonymous]

what a overwhelming load of news on WM2003SE... no complaining! :D :lol:

[Sin]

Perfect timing dcs, just finished upgrading to 1.72 (thanks) and was about to upgrade to Chinese when you posted this.

Can't thank you and mamaich enough, will post the results shortly :D

[Anonymous]

Hi dcs,

Where is the wm2003se rom uploaded? I cant find any. :!:

[dcs]

You have to be logged in to download.

[dcs]

Would like to check if this WM2003SE is the 'OFFICAL' English or just some 'Beta'
As far as I am aware, there is currently no 'Official' English release of WM2003SE for Himalaya devices.

[notepad]

Thanks for the update dcs... cheers to you.....will probably wait before deciding to take a dive to it.. :wink:

[afterlife]

Hi dcs,

Care for a screen shot? And care to tell more about the ext rom program?

CprogHook.WM2003_2577.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
Landscap_WarningMsg_A_220112.sa.CAB
LoadDialogInit_MS_10150402.sa.CAB
OEM_CHS_OU_04110301.sa.CAB
BTPSKeyUpdate_003.exe

And also does this version support GPRS which talking on the line?


Thanks

[asgard]

Hey nice work,... now comes the usual obligatory question... can we get some version #'s from this rom? :-) What #s are we seeing...

Also, I would like to ask... for upgrading we need only use the bigger file yes? The smaller file (extrom) is just for reference? Or do we need to also write that to the unit for full upgrade to?

Thanks and congrats!

[richchiao]

Dear dcs,

Thanks for this hard-work precious.... :lol:

The following are info of my device. Since my existing rom is quite different with what you have, not sure if I can just use your work directly.

ROM version: 1.52.00CHT
Radio version: 1.08
ExtRom version: 1.52.118

If I like to downgrade my device to its original ROM, any actions should I take before upgrading my device by using your ROM.

Thanks for your help.

richchiao

[mamaich]

Someone unknown has uploaded WindowsMobile2003SE.exe to xda-developers FTP. This looks like an O2 2.06.00 ROM with English Windows 2003 Second Edition. It is newer than version provided by dcs (2.02.t1) but older than chinese (2.20.07).

[asgard]

Hi the ftp link is broken and ftp.xda-... gives an error? We are really kicking some goals last few days on the PPC 2003SE huh ;-)

Sure the uploaded one isnt just any old one hexed? :P

[mamaich]

CprogHook.WM2003_2577.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
Landscap_WarningMsg_A_220112.sa.CAB
LoadDialogInit_MS_10150402.sa.CAB
OEM_CHS_OU_04110301.sa.CAB
BTPSKeyUpdate_003.exe

CprogHook.WM2003_2577.CAB - my program that adds "contacts" button to "telephone" application. May be removed.
Landscap_WarningMsg_A_220112.sa.CAB - taken from chinese ROM.
LoadDialogInit_MS_10150402.sa.CAB - taken from chinese ROM.
OEM_CHS_OU_04110301.sa.CAB - audio and BT driver update from chinese rom
BTPSKeyUpdate_003.exe - bluetooth hardware update. The same as contained in official Imate 1.72 update. Should be run once and then may be deleted.

[Anonymous]

Dear all,

Has anyone tried to upgrade from firmware 1.60.00WWE? Will there be country code issue?. Thanks.

[mamaich]

Hi the ftp link is broken and ftp.xda-... gives an error? We are really kicking some goals last few days on the PPC 2003SE huh ;-)
I've attached the file. Who have uploaded it?

[rahjinoh]

When there's no WM2003SE, there's really none, and now, suddenly there's so much choice :lol: :lol:

[asgard]

mamaich, if you were a maiden I would give you an exceedly long and very passionate kiss... but since I am assuming you are not....er.... well done mate!!!!

[sprint]

My god !!!! It have Windows Media Player 9.0.1 Build 14132 .
And my previus chinese ROM had Media Player 10 .
Man this version is much much older then chinese !
But I,ll keep it . Only becouse my chinese is the same as japanise .
So .... thank you any way .

http://forum.xda-developers.com/files/2_732.jpg

Your image is here

[KA Kueh]

Dear mamaich,

What is the difference between your version and the one that is posted by dcs? Thanks.

[sprint]

Sorry I did not put pictures on the right position .
On the top is chinese version . On the bottom what I just got from you .
I did not upgrade RADIO . Only ROM .

[sprint]

mamaich what is your version ?

Is it the same chinese version ROM 2.20.07CHS ?

[sprint]

:arrow: In both ROMs missing Microsoft Reader which I like so much .

[richchiao]

hi, sprint

MS reader can be download from microsoft web site.

[sprint]

:arrow: Thanks . I know about . Just is not many Pocket PC without
Microsoft Reader .

[mamaich]

What is the difference between your version and the one that is posted by dcs?
It is not "my" version. Someone has uploaded WindowsMobile2003SE.exe to FTP and I've just attached it to my previous post.
EXE file contains 2.06 ROM, 1.14 GSM ROM and several files in extended ROM:
AutoRun.exe
TPDisable.exe
TPEnable.exe
Config.txt
CallerIDB10_Hima25_WWE.CAB
CameraB10_Hima25_WWE.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
MMS15024_WWE_Hima_OzUp.sa.CAB
Version_OU.sa.CAB


HIMA_WM_2K3_EXTROM.RAR contains:

AutoRun.exe
BTPSKeyUpdate_003.exe
TPDisable.exe
TPEnable.exe
Config.txt
Caller_ID_WWE_RC10.CAB
CameraRC141_WWE.sa.CAB
CprogHook.WM2003_2577.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Landscap_WarningMsg_A_220112.sa.CAB
LoadDialogInit_MS_10150402.sa.CAB
MIDI561.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
OEM_CHS_OU_04110301.sa.CAB
"spb_gprs_v2.20(build487)_magician_wwe_1007_cid.cab"
i.e much more files, but it has camera problems in landscape mode.
Himalaya_WM2003SE_Upgrade.zip is 2.02 version and WindowsMobile2003SE.exe contains a newer 2.06 ROM. I don;t know what is the difference betwen them. Both of them don't have Windows Media Player 10.

[sprint]

I just check the camera in Landscape mode with the ROM from dcs

Working fine . Actualy the ROM is very "stable" .

[sprint]

:arrow:

[unapproachable2kx]

What is the difference between your version and the one that is posted by dcs?
It is not "my" version. Someone has uploaded WindowsMobile2003SE.exe to FTP .

..Someone? :wink:

..Thank you "Someone" !! Nice xmas gift!

Mamaich do you think we can copy (dump) Wmp 10 dll's from CHS Rom to this WWE?

[fychan]

Hi guys....

Do you guys happen to have problems with the speakers?
They are simply too loud when I need to answer a call.

This happen after restored Mamaich's previous Chinese->English xbackp RAR package together with the WM2003SE (Chinese). In addition, I've also upgraded the Radio to 1.18

Please advise...
Cheers

[Anonymous]

Trying the 2.06 version now, boots with 'TEST ONLY NOT FOR SALE' black writing with PPC2003 logo screen.

Few things noticed:

The bluetooth headset selection intermittently disappears from the today screen.

Had some minor graphical issue with a persistent unwanted menu hanging around.

Boots and runs VERY FAST!

There are no operator presets at all, OR... seems to reset (at the end???) after installing extrom contents. Maybe its a crash reset and the operator stuff didnt install its usually towards the end.

No 'Running Programs' in programs.

Did I mention its nice and fast? :-)

My SD Card works again (did not work with chinese 2.20)

Relatively stable, WMP 9 only, but if you are willing to ignore a few minor oddities this is a blazing fast, if light, rom.

Good work! Its a fine start leading to an eventual holy grail 2003 SE Final lol :P

[Sin]

Upgraded OS & Radio, no problems at all. :D

While waiting, I managed to customise an official 02 extended nbf, rewrote the configs to suit vodafone au and incorporated the SE changes.

Just flashing it now - will let you know how it all went. :shock:

[ZeroXtreme]

Again dcs and mamaich have shined brigher than the sun....
What a great Christmas gift...

I take my hat off to you guys and bow down in gratitude...

THANKS!!!

[daveaus]

So which one should we be upgrading too?..

The DCS version or the mystery man version?

Cheers,

Dave

[agp]

will i be having problem upgrading or downgrading as my booloader is 1.06 :(

[Anonymous]

Hi dcs,

1)do u think is it possible for me to recook the rom by adding cab files extracted from 1.60 Asia rom like PegasCE-sdio.2577.cab and ClearVueV2.4.380WWE.sa.CAB and also telco setting like Maxis.cab, O2ASIAMaxis_AP_20040211.sa.CAB ?
These above mentioned files are meant for gprs and mms setting for my country.

2) Do u think is it alright to combined the mystery man rom wif your HIMA_WM2K3_EXTROM?

3) Your se rom seem missing of ms_.nbf file. During the upgrading process, is it fine without that file? Or would the process be half way hanged due to this missing file.

4) Is there any possibility to upgrade one by one (I mean the Nk.nbf, ms_.nbf and Radio_.nbf) respectively? Or shall i upgrade all of it together in one time (for your se rom would be only the NK.nbf and Radio_.nbf)? Else which is the best way?

Thanks.

[buzz_lightyear]

@mamaich & dcs:

hey guys, that's a GOOD NEWS :o))))

When did this all happen???
I came to work today and there were already two pages of posts... :o)))))))

THANX
buzz

[rahjinoh]

Can anyone confirm whether WindowsMobile2003SE.exe flash result in an upgraded bootloader to 1.06?

[asgard]

My bootloader remained at 1.02 for the 2.06 version, didnt try 2.02 yet.

[ZeroXtreme]

I'm currently in the process of customizing the extended ROM for Asian users. I am still testing which of the old Asian customizations wil and will not function properly with this new ROM.

It will be a mix of the extended ROMs dcs and posted, and some programs and settings from the old official O2 Asian extended ROM.

I'll keep interested users posted...

[edsub]

What a great news this morning!
A BIG thanks to both dcs and mamaich, not to forget fychan and the mistery-man.

Since there are now 2 WWE WM2003SE upgrades available to choose from(talking about luxury . . .), Is it possible that the current users of these ROMS post their experiences.
I allready read that the 2.02 (from dcs) is very fast & stable (also with camera & landscape).
What about the 2.06? Since it is newer, one should expect it is also better . . . (yeah I know in IT 'better' most of the time means 'different' or 'incompatible').

So: Any volunteers that post their experience WITH the version no's they are using?

[double_ofour]

Can someone post again the Second Edition of DCS... the file on the first page is resume not supported, and i am using dial-up internet.. wich means my connection speed is 3kb pers sec. and the file is 17mb. WOA.. plss... i need the DCS Second Edition file that is supported with resume in downloader.. TNX...

And one thing... I am using the o2 XDA II Asian Version... will it worked to an asian version of xda II? any Pilipino there who had tried upgrading their Asian XDA II to this SE rom? or any asian people there can help me tnx... i am currently downloading the DCS Second Ed. Rom.. hope there would be no more problems upgrading it... TNX

[JPS]

Well this cheered me up to no avail this morning :D until I tried to update, with both ROM versions neither will allow me!?!? I've got a UK XDA2 with 1.72 and cooked ext ROM and keep getting Error 120: Country ID Code? Any ideas anyone?

[JaToAc]

see instructions to change header...

still not sure if i should downgrade from the chinese version (incl. WMPm10) to this one... i'll see later

[sprint]

:arrow: Experience ? Heh
I been on the ROM 2.20 , chinese ROM . And now I know whats meaning of Windows Media Player 10 and some more sophisticated stuff . But I know nothing about chinese language , and mamaich english extending pack did not translate everything , so I decide to switch to ROM 2.02.t1WWE . And one thing I can say : It have some difference with
ROM 1.72 but not much as ROM 2.20 .
I hope Mamaich will do the full english translation . But how can I push him to do that ? And probably he do not have to translate anything and just wait for a english latest ROM .

So ... I am on the ROM 2.02 at the moment . And I thing the best way is to wait for a few days . Sure better ROM is coming , better then 2.06 .

And sure I want to thank Mamaich and DCS ! :P

[rahjinoh]

ROM Version : 2.06.00WWE
ROM Date : 06/14/04
Radio Version : 1.14.00
Protocol Version : 1337.24
ExtROM Version :

So far so good, just have to rid of the TEST Boot screen.

Bootloader still at 1.02 :)

[shaytaan]

I'm very new to these stuff, but I wanna upgrade to 2003 SE :)
I orginaly have a Qtek 2020 but the ROM is for T-Mobile :shock: ROM: "160.00WWE Radio: 1.10.00 EXt:1.6.36" I bought it like this...
Please someone explain what is my operator ID and so on which is mentioned at the quote...

Thanks you guys very very much

[Jeff]

WOW! A blazing post for the moment, like buzz said in an earlier post, I came into work this morning and already two pages!!! There are two camps to choose from for the moment and patience will reveal maybe other ones as well so maybe like sprint said we might wait and there will 'magically' appear the full, official and unabridged 2.20WWE ROM with Radio 1.18 or maybe even better on the FTP, NO? Like a lot of you are saying it WILL make a great Christmas gift!!! Keep going and keep checking this post...

- Cheers

[semis0nic]

:arrow:
Device : O2 XDA2
ROM Version : 2.06.00WWE ( mysteryman )
ROM Date : 06/14/04
Radio Version : 1.18.00 ( mamaich )
ExtROM version : 2.06.100a ( mysteryman - DCS stuff combined )

:idea: Result : Fast XDA WM2003 SE machine!

note : VideoMMS is not included in ExtROM but is running cool :lol:

im enjoying this lil gizmo and im in PHILIPPINES...

Thanks to DCS. mamaich, the mysteryman and other guys whos tested and posted this "nifty lil xmas gift"....

'Maligayang PASKO dudes ! ( Merry xmas! )

---------

i wont change my signature until im much "happier: with this ROMS..

[dherrero]

Hi,
I am installing Himalaya_WM2003SE_Upgrade.zip but how do i install HIMA_WM_2K3_EXTROM.RAR? thanks

[double_ofour]

Hi....
To SemisOnic

You said that your device is now:

Device : O2 XDA2
ROM Version : 2.06.00WWE ( mysteryman )
ROM Date : 06/14/04
Radio Version : 1.18.00 ( mamaich )
ExtROM version : 2.06.100a ( mysteryman - DCS stuff combined )

Questions:

ROM Version : 2.06.00WWE ( mysteryman ) What file is this? is this came from DCS? the Himalaya_WM2003SE_Upgrade.zip?

Radio Version : 1.18.00 ( mamaich ) I think this is already included in the DCS upgrade..

ExtROM version : 2.06.100a ( mysteryman - DCS stuff combined ) Where did u get this file?

Please help me..

Tulungan mo ko please.... SALAMAT...

[shaytaan]

Now we are at page 3 and everyone will forget to help me at page 2... please help

I'm very new to these stuff, but I wanna upgrade to 2003 SE Smile
I orginaly have a Qtek 2020 but the ROM is for T-Mobile Shocked ROM: "160.00WWE Radio: 1.10.00 EXt:1.6.36" I bought it like this...
Please someone explain what is my operator ID and so on which is mentioned at the quote...

Thanks you guys very very much

[M4io]

@shatytaan :operator id = country id ; in the very first post dcs tells you how to change it, but read this http://forum.xda-developers.com/viewtopic.php?t=12101 if you still don't know what I am talking about.

I think I'm taking an half day off, can't do much downloading/upgrading here at work :evil:

[chris_khho]

I'm currently in the process of customizing the extended ROM for Asian users. I am still testing which of the old Asian customizations wil and will not function properly with this new ROM.

It will be a mix of the extended ROMs dcs and posted, and some programs and settings from the old official O2 Asian extended ROM.

I'll keep interested users posted...

Thanks everyone....
Thanks, I need the asian customizations....

[Jeff]

To those already SEing:

I am thinking of updating to the Mystery Man ROM, but I don't wish to replace my boot screen from what it is now Qtek, I thought that I may be able to copy the current 1.72 gwes.exe and dump in to the newer ROM 2.06 Mystery Man ROM after upgrading to replace the 'For Test and Not Sale' boot screen... I am unable to do so. Has anyone upgraded to the 2.06 mystery man ROM and changed their boot screen back to their original?

Mystery Man ROM is stable, no?

Thanks for the help...

[shaytaan]

For changing the country ID error to T-mobile: is it good to make a .bat file like this and execute it?

xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306

xda2nbftool -sd PH10 -so TMOBILE -sl WWE NK.nba
xda2nbftool -sd PH10 -so TMOBILE -sl WWE Radio_.nba

xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba

xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306

[double_ofour]

Why did everyone inors my questions... Pls anyone answer me...

ROM Version : 2.06.00WWE ( mysteryman ) What file is this? is this came from DCS? the Himalaya_WM2003SE_Upgrade.zip?

Radio Version : 1.18.00 ( mamaich ) I think this is already included in the DCS upgrade..

ExtROM version : 2.06.100a ( mysteryman - DCS stuff combined ) Where did u get this file?

anyone pls help... where did that user got those files?

Tnx

[dherrero]

When i upgrade the extended rom i alway get "may not display properly" and i cant tap. i have erased the line EXEC:\Extended_ROM\TPDisable.exe from the config.txt. What can i do?
thanks

[Jeff]

@double_ofour:

The MysteryMan ROM is the one posted by mamaich at the top of page 2.
You can ALWAYS find Radio 1.18 anywhere in these forums, but it is the Radio included with dcs's upgrade AND is available as a seperate install from mamaich as well.
ExtROM version : 2.06.100a ( mysteryman - DCS stuff combined ) is the combination of AFTER an install of 2.06.100a (i.e. mysteryman ROM) THEN unlocking the ExtROM and adding some things from the ExtROM provided by dcs, change the config.txt and hard reseting.

@dherrero:
You have installed the 'Landscap_WarningMsg_A_220112.sa.CAB' from the external ROM and therefore will have this warning continually... take it out of your config.txt and hard reset.

Any response to my query?

- Cheers

[edsub]

If you have not succeeded in upgrading your device to any of the 1.72 versions posted here, I think it is better to do that first.
The 1.72 ROM's are mature & stable.

The SE Himalaya packes are still under development, so if you dont know what youre doing: stay away from it for now.

If you're un-experienced, it is probably better to WAIT for a few days until a mature full-upgrade package will be available. (also saves you an extra risky flash operation)

If you DO want to upgrade NOW, at least READ this sticky post (http://forum.xda-developers.com/viewtopic.php?t=12101) from dcs on upgrading BEFORE you ask questions on basic upgrade issues . . .

Sorry, but I get a little annoyed in seeing a lot of posts on these basics in a thread where SE should be the subject . . .

[double_ofour]

Is the file from DCS is came from mysteryman?

But if u were to ask.. What file should you upgrade? he file from DCS or the file from Mamaich? Tnx..

[edsub]

@jeff:
The Boot-screens can be changed by opening the ExtROM (ms_.nbf) with ER2003Edit (download from xda-developers).
Simply extract the bitmaps and replace with anything you like.
In an attempt to contribute to the recent additions to the SE ROMS, I edited the bootscreens in de mistery-man ExtROM to the files as attached. Maybe it saves you some editing . . .

[rahjinoh]

Those with the Asian EXT_ROM can just run 6in1.cab to restore your O2 Boot Screen :)

[Jeff]

@edsub:

Thanks, I cannot seem to get into the file "password" issue - I am sure that this has been covered countless times in this forum and maybe I am too lazy to look through the already 1000's of pages because the Search php is not adept to hunt ONE word searches, but I dont know how to get into the nbf images that were created by the Myster Man ROM due to the lack of a password and furthermore I am unable to install due to the country ID install errors... I think that maybe I might be batting out of my league, I know that you don't learn unless you do, but I have done and ain't learned nutttin! This isn't the place to address these issues, but continue and I will try to catch up with the experts as I am able to know how to unlock with the password, manipulate the nbf images and THEN enjoy the install of the Mystery Man 2.06WWE SE ROM...

- Cheers

[ichanz]

The Boot-screens can be changed by opening the ExtROM (ms_.nbf) with ER2003Edit (download from xda-developers).
Simply extract the bitmaps and replace with anything you like.
In an attempt to contribute to the recent additions to the SE ROMS, I edited the bootscreens in de mistery-man ExtROM to the files as attached. Maybe it saves you some editing . . .
when i try to open ms_.nbf
it's say error accessing image files
can someone tell me what wrong??? :roll:

[buzz_lightyear]

My experience with

ROM version: 2.06.00WWE
ROM Date: 06/14/00
Radio version: 1.14.00
Protocol version: 1337.24
ExtROM version: 2.06.100a


Runs very fast (same as chinese)
Faster reboot, screen is accessible immediately after reboot
Inbox(Outlook) is handling MMS, SMS, IMAP4, POP3
File Manager is missing the "back" button - compared to chinese ROM
Connection status is shown together with signal strength (CHS ROM shows separate GPRS/wireless status icon)
Better looking icons (new design), but not as many as in CHS ROM
There are some more programs (utilities) in CHS ROM, e.g. BT profiles selector
WMPlayer ver 9 (CHS ROM has already ver 10)


That's it 4 now....

Have a nice day everybody... :o)
buzz

[Sin]

Hi,
how do i install HIMA_WM_2K3_EXTROM.RAR? thanks

If you extract it's contents into the same folder that the HimaUpgradeUt.exe is executed from, it will automatically be included and install an extended rom after a hard reset.

The other alternative is to download the mystery_man version: To customise it, use er2003edit to edit the ms_.nbf file (password 0x20040305). The config.txt file can be extracted, modified and re-embeded along with any additional files and splash screens.

Using bootloader 1.03, I've combined the mystery_man version OS (2.06.00WWE) with mamaich's radio version (1.18.00) and edited the mystery_man extended rom version (2.06.100a) to include the original splash screens from 02, pegasus sdio and vodafone au customisations.

Can't fault any aspect of the new SE, no screen flicker, camera & landscape works great. The whole system is stable & running fast. :D

All that's needed now is to embed MediaPlayer 10 & MSReader.

[dcs]

Wow. I posted this at 03:39 this morning, I've not long got up and 66 replies already! :) I will try and answer peoples unanswered questions as soon as possible, but please be patient - there is a lot to wade through. Plus there is the mystery upload that I noticed after I had posted this.

[buzz_lightyear]

@dcs
Wow. I posted this at 03:39 this morning

good morning :o)))

[adbradwell]

right now I'm using bootloader 1.06

ROM version : 1.72.00WWE
ROM date : 03/15/04
Radio Version : 1.08.00
Protocol version : 1337.18
ExtROM version : 1.72.104

My question is, can I just replace the ExtROM from dcs and do the hard reset? So my device could just using everything from 2003 SE?
thx guys

[Jeff]

@ all:

Strange how some investigative searching and thought can usually answer your own questions... Ya live and ya learn.

I figured it out and am at 51% of the Mystery Man ROM with a changed boot image (thanks to edsub) and a bit of changing to the ExtROM...

Let you all know how it goes... by the looks of it - it should be OK

-Cheers

[tumtum]

right now I'm using bootloader 1.06

ROM version : 1.72.00WWE
ROM date : 03/15/04
Radio Version : 1.08.00
Protocol version : 1337.18
ExtROM version : 1.72.104

My question is, can I just replace the ExtROM from dcs and do the hard reset? So my device could just using everything from 2003 SE?
thx guys

I doesn't know your meaning exactly.
But if you flash only Ext.ROM, your device won't be WM2003SE.
it means that you cannot use any feature of WM2003SE.
You need to flash main ROM (NK.nbf) too.

[sandyind]

Hi all

First of all, heartfelt thanks to dcs and mamiach and everyone else involved in building 2.02.

I moved to dcs's 2.02 version (after making the necessary country code corrections) this morning and havent had any issues except with the start menu in landscape mode. However, been reading quite a few posts quoting lightning speed on 2.06 supplied by mystery man and couldnt help downloading the same.

However I am getting countrycode errors here and cant seem to replicate the procedure suggested by DCS for fixing the countrycode errors on this version.

Any ideas?

Thanks in advance and all the best

Sands

[Rico83]

WWE SE lookin great guys, well done to everyone who helped along tha way!!


one wee problem i need an answer for,

i flashed the 2.02.t1WWE se and 1.18.00 but i didnt have any extended rom flashed as i didnt have one at the time,

now i have mad a custom exrom using the lates orange spv m1000 extended rom,

can i flash this to the device itself and somehow execute the extended rom,
the older rom came up with an error like "programs not supported with this version" and then froze, i reset and obviously the exrom didnt install or re-execute...

so down to the point:
can i flash extended rom by itself?
can the extended rom be re-executed at a later time?


cheers everyone!

[Jeff]

Mystery Man ROM is the BOMB, G!!!!! FAST AND it seems to be SO FAR STABLE!!!! :D

It took some messing with to get it configured so I can understand and appreciate a lot more now the steps involved....

CLEARTYPE without RESTART too!!! ON the chinese to English SE ROM from mamaich there was no cleartype, here there is!!!

This IS a true SE ENglish ROM :) WP is 9.0.1 Build 14132 - but who cares if it isnt the one in the 2.20CH ROM, at least we can understand what buttons are what!

This is a great christmas preset!!! Thanks to all and especially Mystery Man for his/her contribution to the community.

- Cheers

[butt]

Has anyone else had problems trying to sync the wm2k3se device with there desktop

i'm gettin the error

An incompatable version of Microsoft ActiveSync software has been detected, Syncronisation has been deabled. Upgrade ActiveSync on your desktop computer and reconect

i'm running ActiveSync 3.7.1 is there a newer version ???

[dcs]

I have synchronised without any problem. Check the build number of your Activesync. - mine is 4034. I do know that Microsoft released some quite major fixes/changes under the guise of a new build when it really should have been a new release.

[rasli]

No matter what I do my device keeps freezing after 5 min. Tried both soft and hard resetting, but no luck. It even freezes during activesync. I have upgraded it twice already with DCS version, but no luck!

Flashing it a third time now, with minimum cabs in ext rom.

DCS, any ideas as to what I might be doing wrong?

[FOSA]

Hi! :roll:


Just one question since this is the 1st time using SE.

How to activate landscape mode? Is there any on-the-fly button?

Thanks

[Shikra]

Hi everybody
Thanks to DCS and "Mysteryman"
Just Updated to DCS's Himalaya_WM2003SE-Upgrade.zip
ROM Version 2.02.tiWWE
Radio 1.18.00
Protocol 1337.38
Used ms.nbf from MysteryMan's Ms.nbf (2.06.0)
My impression:
1. Boots faster than 1.72 (I think) but want to compare with 2.06.0
2. Start menu has recent programs in the middle insted at top (I think it is feature of WM2003 SE or a Bug? :) )
3. Clock setting screen does not show analog clock
4. New Network cards menu in Connection setting
5. Programs menu has "Find" program :)
6. Pocket MSN is added
7. Sim manager and Sim toolkit work in landscape but the screen is not adjusted to Landscape.
8. Icons have become prettier (wait is more pleasent now)
9. Landscape works on all apps without flaw.
10. Bluetooth activesync is as tedious as before ( I think we need to put Widcomm 1.5.0 ;)

Will try 2.06.0 ROM from "Mysteryman" now and will tell you how that fares
Regards
Shikra

[dcs]

Hi! :roll:


Just one question since this is the 1st time using SE.

How to activate landscape mode? Is there any on-the-fly button?

Thanks

You can map a hardware button to <Rotate Screen> in Settings->Personal->Buttons

[dcs]

Could the 'Mystery Poster' please PM or email me and tell me who you are? I will not divulge it to anyone else (I give you my word) - I would just like to know :) along with any details, comments, etc. about the version that was posted.

[rob_pinnington]

DCS
you are doing a great job and I will be loading the ROM this weekend.
Is it possible to add the wmp10 to the rom?

[dcs]

DCS
you are doing a great job and I will be loading the ROM this weekend.
Is it possible to add the wmp10 to the rom?

Efforts are being made to do this, but nothing yet. I expect it will happen though :)

[xdaiiuser]

I upgraded to WM2003SE provided by DCS, Not updated the HIMA_WM_2K3_EXTROM i dont how how to update that so I have
ROM 2.02.t1WWE
ROM DATE 05/17/04
RADIO 1.18.00
PROTOCOL 1337.38
EXT ROM 1.60.44

However i have a problem , when i click on
1. the SIM MANAGER under programs
2. the PHONE under setting
3. the OPTIONS menu under the Phone i get the following message alert bubble

'the phone is not ready.Wait 15 Seconds and try again'

Please advise

[dcs]

Dear dcs,

Thanks for this hard-work precious.... :lol:

The following are info of my device. Since my existing rom is quite different with what you have, not sure if I can just use your work directly.

ROM version: 1.52.00CHT
Radio version: 1.08
ExtRom version: 1.52.118

If I like to downgrade my device to its original ROM, any actions should I take before upgrading my device by using your ROM.

Thanks for your help.

richchiao

A couple of things to take care with. Preferably you should have available the 1.52.00CHT ROM upgrade package for use later if needed. If you don't have that then it will be necessary to make a flashable backup to an SD card. There are threads on this subject. Also, changing from one language to another will require you to make modifications to the nbf headers in the supplied nbf files. See my post here (http://forum.xda-developers.com/viewtopic.php?t=12101) for details on how to go about that.

[SimonAlbion]

Hi
I've got the orange m1000 and everyone on this topic mostly seem to be o2 users. Are any difficulties in upgrading to dcs's when on orange?

[FOSA]

Hi dcs,

Thanks :D

However, there're only 4 buttons to select and assign namely, by default, Calendar, Contacts, Camera and Record.

Is there anyway to make use of the D-pad in this case for assigning 'Screen Rotate'?

Thanks again.

[FOSA]

Completed my metamorphosis to WM2003SE :D

ROM version : 2.06.00WWE with Radio version 1.18.00

Its a new experience :D

Now, only if they can

a) change the splash skin (I mean incorporate it into the ROM)
b) include WMP 10
c) customized the EXT ROM version to asian version with SOCKET SDIO WiFi driver, running program and local telcos cab files etc


THAT WOULD BE PERFECT, MAN :clap:

Lucky didn't buy the IIs :P

[Rico83]

Hi
I've got the orange m1000 and everyone on this topic mostly seem to be o2 users. Are any difficulties in upgrading to dcs's when on orange?

iv upgraded my spv m1000 to the chinese version, downgraded again to the orange 1.66 then upgraded to 2.02 SE and now upgrading to 2.06


no probs whatsoever,

PS, i have made an exdended rom with all the new se stuff (mysterymans) and also the latest orange exrom stuff (orange settings etc)


regards

[KA Kueh]

Dear all,

Has anyone successfully update from ROM version 1.60.00WWE ?

[dcs]

Completed my metamorphosis to WM2003SE :D

ROM version : 2.06.00WWE with Radio version 1.18.00

Its a new experience :D

Now, only if they can

a) change the splash skin (I mean incorporate it into the ROM)
b) include WMP 10
c) customized the EXT ROM version to asian version with SOCKET SDIO WiFi driver, running program and local telcos cab files etc


THAT WOULD BE PERFECT, MAN :clap:

Lucky didn't buy the IIs :P
I expect that all these things will come to be :). ZeroXtreme will be producing an Asian Extended ROM just like the great job he did with the recent 1.72 O2 release. The splash screens could be incorporated into the Extended ROM as a cab file (that's what I have done for my O2 splash screens). WMP10 I am sure will be made standalone so it can either be incorporated into the OS ROM or, at least into the Extended ROM.

[dcs]

I upgraded to WM2003SE provided by DCS, Not updated the HIMA_WM_2K3_EXTROM i dont how how to update that so I have
ROM 2.02.t1WWE
ROM DATE 05/17/04
RADIO 1.18.00
PROTOCOL 1337.38
EXT ROM 1.60.44

However i have a problem , when i click on
1. the SIM MANAGER under programs
2. the PHONE under setting
3. the OPTIONS menu under the Phone i get the following message alert bubble

'the phone is not ready.Wait 15 Seconds and try again'

Please advise

This problem is not peculiar to this upgrade. It has appeared before. Try searching the forums for it - you may find some answers.

[Shikra]

Just now upgraded to Mamaich's "Mysteryman" WM2003SE Upgrade
ROM Version 2.06.00WWE
Radio 1.14.00
Protocol 1337.24
EXTRom2.06.100a)
My impression:
1. Boots faster than 2.02.t1
2. Clock setting screen still does not show analog clock
3. Sim manager and Sim toolkit work perfectly in Landscape.
4. Camera hates Landscape and reverts to portrait mode from Landscape (May be used to turn from landscape to portrait with a click of button ;) )
5. Icons have become prettier (wait is more pleasent now)
6. Landscape works on all apps without flaw.
7. Bluetooth settings are updated
8. GPRS icon is separate now.
9. Till now looks pretty stable.
Hope somebody will post later builds of W2K3SE which is closer to CHS rom.
Thanks for all the XDA-Developer.COMmunity for making this to happen.
Regards
Shikra

[dcs]

will i be having problem upgrading or downgrading as my booloader is 1.06 :(

I don't think the considerations for bootloader v1.06 have changed because of this upgrade. v1.06 of bootloader applies one of two rules (not sure which) ... Either it does not allow an upgrade to a version lower than 1.66 or it does not allow an upgrade more than 1 version lower than the current one. Personally, I favour the former, but I don't know for sure.

[Shikra]

EXT ROM 1.60.44

However i have a problem , when i click on
1. the SIM MANAGER under programs
2. the PHONE under setting
3. the OPTIONS menu under the Phone i get the following message alert bubble

'the phone is not ready.Wait 15 Seconds and try again'
Dear xdaiiuser
I think the error is due to older external rom files. Try upgrading to DCS external rom files by using ExtendedROMUnlocker. Check wiki pages for this great tool.

[dcs]

Hi dcs,

1)do u think is it possible for me to recook the rom by adding cab files extracted from 1.60 Asia rom like PegasCE-sdio.2577.cab and ClearVueV2.4.380WWE.sa.CAB and also telco setting like Maxis.cab, O2ASIAMaxis_AP_20040211.sa.CAB ?
These above mentioned files are meant for gprs and mms setting for my country.

2) Do u think is it alright to combined the mystery man rom wif your HIMA_WM2K3_EXTROM?

3) Your se rom seem missing of ms_.nbf file. During the upgrading process, is it fine without that file? Or would the process be half way hanged due to this missing file.

4) Is there any possibility to upgrade one by one (I mean the Nk.nbf, ms_.nbf and Radio_.nbf) respectively? Or shall i upgrade all of it together in one time (for your se rom would be only the NK.nbf and Radio_.nbf)? Else which is the best way?

Thanks.

I don't think there is much limitation on what you can cook into your own Extended ROM, except imagination :). However, as I stated in my original post, some applications will produce an error message about display compatibility which can be ignored, but the message has to be acknowledged for the Extended ROM installations to continue. Therefore it is important to ensure that the display can be tapped during Extended ROM installation, so disabling the running of TPDisable.exe is imperitive.

It is not necessary to have the ms_.nbf file present, it will not cause the upgrade to hang.

A nice way of installing that I like is to run the usual upgrade program for NK.nbf and Radio_.nbf and then after hard reset, enable Extended ROM reading and writing and place the required CAB files, etc in there along with suitably configured Config.txt and the Autorun.exe program. Then just run Autorun.exe and it will install Extended ROM in same manner as if after hard reset.

[dcs]

Dear all,

Has anyone successfully update from ROM version 1.60.00WWE ?

I don't think you will have a problem doing this.

[dcs]

Hi
I've got the orange m1000 and everyone on this topic mostly seem to be o2 users. Are any difficulties in upgrading to dcs's when on orange?

iv upgraded my spv m1000 to the chinese version, downgraded again to the orange 1.66 then upgraded to 2.02 SE and now upgrading to 2.06


no probs whatsoever,

PS, i have made an exdended rom with all the new se stuff (mysterymans) and also the latest orange exrom stuff (orange settings etc)


regards
Excellent work djrm :). Perhaps you should upload your Extended ROM for others to try.

[puja_kusmana]

Hai dcs, does it work with ROM Version 1.52.00 and Radio version 1.05.14 :? :?:

[Shikra]

dcs
Tried to look inside external rom file you posted for w2k3se. CprogHook.WM2003_2577.CAB file is corrupt inside the rar file. It looks like mamaich's Phone Extension.
Can you check.

[SimonAlbion]

DCS wrote

"Excellent work djrm . Perhaps you should upload your Extended ROM for others to try."

DRJM if you upload it I will give it a run this weekend, I will need an idiots guide though as I am new to this![/img]

[Rico83]

DCS wrote

"Excellent work djrm . Perhaps you should upload your Extended ROM for others to try."

DRJM if you upload it I will give it a run this weekend, I will need an idiots guide though as I am new to this![/img]

yesterday was the first time i did any flashing with the xda, thanks to the ppl on this site who help out as much as they can!!

anyhooz,
heres an extended rom for orange uk users who upgrade to 2003SE
http://forum.xda-developers.com/viewtopic.php?p=70843#70843

CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\cttune.cpl.CAB
CAB: \Extended_ROM\frontlight_wavedev_dim.sa.CAB
CAB: \Extended_ROM\homepage_Notes_UK.CAB
CAB: \Extended_ROM\Orange_UK_customization0608.sa.CAB
CAB: \Extended_ROM\Orange_network.sa.CAB
CAB: \Extended_ROM\UKORGCustomize.CAB
CAB: \Extended_ROM\OrangeUK_AP.sa.CAB
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\MMS15024_WWE_Hima_OzUp.sa.CAB
CAB: \Extended_ROM\Version_OU.sa.CAB
CAB: \Extended_ROM\SFD.CAB


regards

[FOSA]

Hi KA Kueh!

I've upgraded my asian v1.60.00WWE ROM to v1.72 WAXX ROM and to UK v1.72 ROM and now v2.06.00WWE of WM2003SE.

So far no problems :lol:

[FOSA]

Hi dcs,


Are there IntelliPad and IntelliDialler in your version of WM2003SE?

I thought I saw the cab files in your EXT ROM? Do they work? :roll:

Thanks

[KA Kueh]

Hi Fosa,

Thanks for the info. But I am just wondering if the upgrade might cause major problems going straight from ROM 1.60.00WWE to the v2.06.00WWE of WM2003SE. I cannot afford to have a dead XDA II now as my conventional phone is not working. Cannot afford to lose the phone and/or pda function in one go. Thanks.

[Anonymous]

my xdaII is on bootloader ver 1.06, does this mean if i were upgrade to any of this WM2003SE rom, i can't downgrade anymore to rom ver 1.66wwe, 1.72wwe?

appreciated if any1 can correct me. :D thx a million

[dcs]

Hai dcs, does it work with ROM Version 1.52.00 and Radio version 1.05.14 :? :?:

Not sure what you mean. Do you mean can you upgrade from that version? If so, then should be OK as long as you look after the operator and language IDs as per my post here (http://forum.xda-developers.com/viewtopic.php?t=12101).

[tumtum]

Is it possible to use .CAB file from XDA IIs?

I can't test it now. But i will try on this weekend.

If anyone have idea about it,please explain.

[dcs]

dcs
Tried to look inside external rom file you posted for w2k3se. CprogHook.WM2003_2577.CAB file is corrupt inside the rar file. It looks like mamaich's Phone Extension.
Can you check.

Will do. I didn't produce the extended ROM file though - that was mamaich and he is not going to be online again till Monday.

[dcs]

...heres an extended rom for orange uk users who upgrade to 2003SE
http://forum.xda-developers.com/viewtopic.php?p=70843#70843 ...

The download link in that post is not working :(.

[dcs]

Hi dcs,


Are there IntelliPad and IntelliDialler in your version of WM2003SE?

I thought I saw the cab files in your EXT ROM? Do they work? :roll:

Thanks
They are in the extended ROM put together by mamaich which I attached to my original post. I haven't tried them myself but my understanding is that they work :).

[dcs]

Hi Fosa,

Thanks for the info. But I am just wondering if the upgrade might cause major problems going straight from ROM 1.60.00WWE to the v2.06.00WWE of WM2003SE. I cannot afford to have a dead XDA II now as my conventional phone is not working. Cannot afford to lose the phone and/or pda function in one go. Thanks.

I don't think it should make any difference what version you upgrade from, except possibly some applications you may install later which worked on 1.60 but might have problems on SE. The basic functions of the device should be OK though, judging from the feedback so far in this forum.

[dcs]

my xdaII is on bootloader ver 1.06, does this mean if i were upgrade to any of this WM2003SE rom, i can't downgrade anymore to rom ver 1.66wwe, 1.72wwe?

appreciated if any1 can correct me. :D thx a million
I am not entirely sure, but I think it should be OK. I have a feeling that v1.06 of bootloader just prohibits upgrades with a version less than 1.66. But someone please correct me if I am wrong - it is important! :).

[dcs]

Phew! I think I've caught up again :D

[Rico83]

...heres an extended rom for orange uk users who upgrade to 2003SE
http://forum.xda-developers.com/viewtopic.php?p=70843#70843 ...

The download link in that post is not working :(.

sorry folks, type in the filename! :shock:
its working now

[unapproachable2kx]

A simple question that comes out..maybe someone will reply me in future..

Do you remember that Combo SD 256Mb and Wifi card was incompatible with Windows Mobile 2k3..
So,theorically now with Win 2k3SE it must run well? can someone verify that?

Thank you!

[dcs]

... sorry folks, type in the filename! :shock:
its working now
:D typo in the 'type in the filename'?

[dcs]

A simple question that comes out..maybe someone will reply me in future..

Do you remember that Combo SD 256Mb and Wifi card was incompatible with Windows Mobile 2k3..
So,theorically now with Win 2k3SE it must run well? can someone verify that?

Thank you!
That is a very good question :). Hopefully, someone has one that can try it - I'm not going to go buy one though till I know it works :).

[Rico83]

... sorry folks, type in the filename! :shock:
its working now
:D typo in the 'type in the filename'?

typo in the filename,
had a bit to drink :o

[hatredlam]

TO DCS:
can i change the released simplied chinese 2003SE version or the eng 2003 ver posted by you to traditional chinese 2003SE version?
because i am chinese living in Hong Kong,so i prefer the tradition chinese 2003SE version.
thank you very much in advance!

[dcs]

For changing the country ID error to T-mobile: is it good to make a .bat file like this and execute it?

xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306

xda2nbftool -sd PH10 -so TMOBILE -sl WWE NK.nba
xda2nbftool -sd PH10 -so TMOBILE -sl WWE Radio_.nba

xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba

xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306

I've created a .BAT file which can be run from a DOS prompt...

Usage: OperatorUpdate operatorID
where operatorID is O2 or CDL or TMOBILE, etc.

I have attached it here and also added it to my initial post, just unzip the zip file.

Please let me know if any problems with it.

[dcs]

TO DCS:
can i change the released simplied chinese 2003SE version or the eng 2003 ver posted by you to traditional chinese 2003SE version?
because i am chinese living in Hong Kong,so i prefer the tradition chinese 2003SE version.
thank you very much in advance!

Only if a CHT version becomes available.

[qyach]

I find 2 problems of the new rom:

1. I cannot use Camera after upgrading to wm2003se. I cannot find any icon about the camera in Programs or Power button. Can anyone help!!!

2. There is no Photo caller ID in wm2003se

:(

[sprint]

Simple question : Which one is better ? 2.02 or 2.06

[Anonymous]

Dear all,

Does the new ROM works with or have the following problems:

1) ActiveSync via Bluetooth
2) Bluetooth with headset profile to Jabra BT200 and BT250
3) Slow switch on and off the machine if there is a SD card in used. (I mean that cause a delay between 3 to 8 seconds from the time the power button is pressed).
4) Also with SD card in the SD slot clicking the bluetooth icon cause a delay of between 5 to 20 seconds for the setting page become active.

Regards,
Kueh

[NinjaDonkey]

Quick question:

Is it possible to use MMS_v2.0.0.13_BA_WWE_0831.CAB in the ROM that "mysteryman" uploaded?

Curerntly there's MMS15024_WWE_Hima_OzUp.sa.CAB in the Extended ROM from that upgrade.

EDIT: I had heard that Pocket Outlook handles MMS messages now - am I right in saying that was only in the Chinese ROM or is it also in the English ROMs that are available?

[Sin]

Just thought I'd say another quick thank-you to dcs & mamaich for all their efforts.

Attached is everything needed to install ROM version EN-2.06.00WWE, Radio version EN-1.18.00 + a cooked extended rom (.nbf) version - based on EN-2.06.100a to suit Aussie carriers: Optus, Telstra & Vodafone.

See: http://forum.xda-developers.com/viewtopic.php?t=13660

[a18041967]

Great work, and many thanks, just in the process of installing the 2.06 update, one question has anyone tried installing the Blackberry client yet?

If not does anyone have a link to the blackberry CAB file I'll give it a test once the upgrade has finished, and report my findings.

[BigMax]

to 2.06WWE user: what the Bluetooth stack type in this ROM? Microsoft or Widcomm?

[tomlow1]

Quick question:

Is it possible to use MMS_v2.0.0.13_BA_WWE_0831.CAB in the ROM that "mysteryman" uploaded?

Curerntly there's MMS15024_WWE_Hima_OzUp.sa.CAB in the Extended ROM from that upgrade.

EDIT: I had heard that Pocket Outlook handles MMS messages now - am I right in saying that was only in the Chinese ROM or is it also in the English ROMs that are available?

Good question! I'm finding the MMS situation slightly confusing. Which is the best cab file to use, or is it neither because Outlook handles it? Is Video MMS still supported?

Also if Outlook is the preferred MMS handler, has provision been made for these messages to be backed up/restored using a PC?

Also keep up the good work with getting WMP10 included!

Ash

[dr_kaan]

Hi guys, and thank you all for your efforts. :)

However when i tried to run the windowsmobile2003se.exe it said "you don't have the correct rom" or smt like that and quit the setup. I have 1.72 wwe dutch rom which i downloaded here. Was it my fault?

Thanks again

PS: I'm uploading the Turkish operator Turkcell settings file, hope you insert it in the new rom.

[sprint]

:arrow: :arrow: :arrow: :arrow: :arrow: :arrow: :arrow:
For the last two days ...
Upgrade and downgrade from
1.72 :arrow: 2.20 :arrow: 2.02 :arrow: 2.06 ...
Now I am stuck on booting with 2.06 AU version. Hard reset is not helping.
So ... probably I have to downgrade to 2.02 which gave me no problems .
Or I can try one more time 2.06 clear version , without extended ROM .
Intresting :wink:

[Zuhel]

With SE rom I have such a problem: when somebody calls me(or i call sombody) and i answer to this call, automaticly turns on speaker mode.
How to fix it?

[xdaiiuser]

hi dcs

i am trying to open the ROM of windowsmobile2003se provided by mamaich
with er2003edit, but it cannot find the correct password in auto mode also, would you be able to advice on this?
thanks

[Zuhel]

hi dcs

i am trying to open the ROM of windowsmobile2003se provided by mamaich
with er2003edit, but it cannot find the correct password in auto mode also, would you be able to advice on this?
thanks
NK.nbf - 0x20040304
ms_.nbf - 0x20040305
radio_.nbf - 0x20040306

[gugi_sat]

Hi DCS
i downloaded HIMA_WM_23K_EXTROM.RAR file from first page with the Himalaya_WM2003SE_Upgrade.zip.
i installed the WM2003SE but when i try to install the Ext ROM its give me the same error as u listed in yr 2 NOTE on first page
my config file is some thing like this
CAB: \Extended_ROM\CameraRC141_WWE.sa.CAB
CAB: \Extended_ROM\MIDI561.sa.CAB
CAB: \Extended_ROM\CprogHook.WM2003_2577.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831.CAB
CAB: \Extended_ROM\OEM_CHS_OU_04110301.sa.CAB
CAB: \Extended_ROM\spb_gprs_v2.20(build487)_magician_ww e_1007_cid.cab
CAB: \Extended_ROM\Caller_ID_WWE_RC10.CAB
CAB: \Extended_ROM\EmailWiz_v1.01.0003_NL_1027.CAB
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
its still give me the same error and my xda hangs up i have to restart it .
i also tried removeing the
CAB: \Extended_ROM\CameraRC141_WWE.sa.CAB
but same results
can you help me with problem
Kind Regards

[edsub]

@xdaiiusewr: DO NOT use auto-mode.
As discussed before, DO select the type of file to open yourself!!!

[dr_kaan]

Hi,

The australian rom gives the same error. What am i supposed to do?

Thanks a bunch

[Guys2]

Good news /Bad News

Good news Blackberry client works perfectly on XDA II upgraded. to wm2003SE.



Bad news Blackberry client does not work on MDA III. Anyone have any ideas why or how to get blackberry to work on MDAIII

Thanks
Guy

[robinton]

Just a note to all, if you use Microsoft Reader, It is not included in the ROM. You will need to install it seperately or modify the Extended ROM to include it (My solution) if you want it.

Robert
Houston, TX

P.S. Thanks for posting the ROM, I was sweating the possibility of getting into dutch with my Microsoft rep by posting a copy myself!

[sprint]

:arrow: AU ROM from Sin stucking on bootloading every second time .

[griffog]

I missed the note regarding TPDisable, now after the hard reset it keeps erroring when the cab files in the Ext ROM are installed and I can't clear the warning dialogues.

How can I now disable TPDisable given that I can't access the Ext ROM?

[Anonymous]

Guys2 do you have a link to the Blackberry client?

Cheers

[JPS]

I've updated to the 2.06 rom very stable just testing which is optimum camera software of 2 roms. have already cooked the external rom and am now testing tomtom satnav and bluetooth. Oy yeah need to change boot loader image to my XP one from previous posts.

[gugi_sat]

I missed the note regarding TPDisable, now after the hard reset it keeps erroring when the cab files in the Ext ROM are installed and I can't clear the warning dialogues.

How can I now disable TPDisable given that I can't access the Ext ROM?

I am having the same problem
plz help

[avers]

Press the center of the Navi-key to close the dialog!

by Avers

[gugi_sat]

Press the center of the Navi-key to close the dialog!

by Avers
sorry but which NAVI-KEY
i tried to press ok button but my xda hands up i can't do with it , the only option is to reset
kind regards

[Anonymous]

SanDisk CF WiFi card appears to work, but never manages to obtain an IP address, the LED just keeps flashing. This is using the latest drivers from SanDisk web site

[avers]

The navigation button. (the 5-ways button in the middle under the display)
:)

[gugi_sat]

The navigation button. (the 5-ways button in the middle under the display)
:)

thanx mate
i will give it try now

[recrem]

Has anyone from Australia experienced any problems with Sin's upgrade package?

I will back-up my current rom to SD card today, ready for the plunge into rom upgrading. If the upgrade package has no problems (rom version 2.06) then I will install this weekend!

Recrem...

[NinjaDonkey]

I've upgraded to the 2.06 SE ROM and installed a few apps - namely PocketPlus 2.2, Pocket Informat 5.61, Pocket Breeze 4.1, Calligrapher 7.4 and MessageEase 1.5.

I left the phone and it duly turned itself off. I pressed the power button but nothing happened. Pressing soft-reset is the only way to get it back.

I also noticed that on occasion, when the backlight turns off after 30 seconds that the touch screen no longer responds. If I then press the power button the device then goes into the off state and I have to soft-reset to get it back again.

I used the Extended ROM djrm.net posted in http://forum.xda-developers.com/viewtopic.php?p=70981#70981 but changed the MMS CAB

Here's my config.txt of installed apps on hard-boot - maybe someone can help...

CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\cttune.cpl.CAB
CAB: \Extended_ROM\frontlight_wavedev_dim.sa.CAB
CAB: \Extended_ROM\homepage_Notes_UK.CAB
CAB: \Extended_ROM\Orange_UK_customization0608.sa.CAB
CAB: \Extended_ROM\Orange_network.sa.CAB
CAB: \Extended_ROM\UKORGCustomize.CAB
CAB: \Extended_ROM\OrangeUK_AP.sa.CAB
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831.CAB
CAB: \Extended_ROM\Version_OU.sa.CAB
CAB: \Extended_ROM\spb_gprs_v2.20(build487)_magician_ww e_1007_cid.cab
CAB: \Extended_ROM\SFD.CAB
EXEC: \Extended_ROM\BTPSKeyUpdate_003.exe
RST: Reset

[Grobs]

I really appreciate all the work done by many people here! :!:

@ Edsub: I am using your 1.72 dutch t-mobile rom, are you planning to release an SE version? That would save me from the nightmare of a home-baked misery. :wink:

Thanks again for pushing the enveloppe some more!

[Rico83]

I've upgraded to the 2.06 SE ROM and installed a few apps - namely PocketPlus 2.2, Pocket Informat 5.61, Pocket Breeze 4.1, Calligrapher 7.4 and MessageEase 1.5.

I left the phone and it duly turned itself off. I pressed the power button but nothing happened. Pressing soft-reset is the only way to get it back.

I also noticed that on occasion, when the backlight turns off after 30 seconds that the touch screen no longer responds. If I then press the power button the device then goes into the off state and I have to soft-reset to get it back again.

I used the Extended ROM djrm.net posted in http://forum.xda-developers.com/viewtopic.php?p=70981#70981 but changed the MMS CAB

Here's my config.txt of installed apps on hard-boot - maybe someone can help...

CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\cttune.cpl.CAB
.
CAB: \Extended_ROM\homepage_Notes_UK.CAB
CAB: \Extended_ROM\Orange_UK_customization0608.sa.CAB
CAB: \Extended_ROM\Orange_network.sa.CAB
CAB: \Extended_ROM\UKORGCustomize.CAB
CAB: \Extended_ROM\OrangeUK_AP.sa.CAB
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831.CAB
CAB: \Extended_ROM\Version_OU.sa.CAB
CAB: \Extended_ROM\spb_gprs_v2.20(build487)_magician_ww e_1007_cid.cab
CAB: \Extended_ROM\SFD.CAB
EXEC: \Extended_ROM\BTPSKeyUpdate_003.exe
RST: Reset

hows it goin someone?? ,
the culprit to ma switch off prob was

CAB: \Extended_ROM\frontlight_wavedev_dim.sa.CAB

i removed this to my exrom should work ok now


regards

PS: sfd.cab is the open.net CF kit, for developers ken? i stuck it in coz our company uses it for our apps... ma be usefull to some folk

[rashe30]

When upgrading to 2.06 is it better to use the extended from that i have now from 1.72 or upgrade the extended rom too?

[Rico83]

When upgrading to 2.06 is it better to use the extended from that i have now from 1.72 or upgrade the extended rom too?

kinda depends,
if your rom has tbdisalbe.exe on it you will get errors (no doubt) about the apps not being supported on the new rom and you will not be able to click the ok button,

u could try it (i did on my old rom) if u ge probs then get a new/modified rom with tpdisabled NOT enabled (in the config.txt) and u can get your exrom to work...

[FOSA]

Hi Guest!


Quote

"3) Slow switch on and off the machine if there is a SD card in used. (I mean that cause a delay between 3 to 8 seconds from the time the power button is pressed).
4) Also with SD card in the SD slot clicking the bluetooth icon cause a delay of between 5 to 20 seconds for the setting page become active. "

I'm using ROM v2.06 and there's no problem with the above

:D

[FOSA]

Found a Bluetooth glitch in v2.06

Sometime the bluetooth icon on the Today screen would disappear like when switching between hard buttons or from portrait to landscape mode and vice versa. The bluetooth service, however, is still working just that the icon disappear from the Today screen.

A glitch or the responsible file is corrupted? Anyone has this problem?

:?:

[bezzita]

I'm currently in the process of customizing the extended ROM for Asian users. I am still testing which of the old Asian customizations wil and will not function properly with this new ROM.

It will be a mix of the extended ROMs dcs and posted, and some programs and settings from the old official O2 Asian extended ROM.

I'll keep interested users posted...

Pls keep us updated...! :)

*BOW* to all of XDA gurus which make this possible :D

[Guys2]

The Blackberry files are located in the Blacberry topic on this site.


Thanks\Guy

[NinjaDonkey]

djrm.net - you're a star!

Removing frontlight_wavedev_dim.sa.CAB from the Extended ROM worked a treat. Cheers for that.

FOSA: I have the same problem with it vanishing. It's still there though because you can still tap in the area it is/should be showing.

Because of the excellent support everyone here provides I decided to donate to the site cuz it's such a valuable resource for everyone.

Keep up the good work guys, and let's hope we can get WMP10 :)

[rashe30]

can someone post the proper password for 2.06 0x2040306 seems to be incorrect

[FOSA]

Hi NinjaDonkey!


Yes, sometime its there and on two occasions the entire line of the BT icon is not there. The BT profile is not even in the Today Settings but you can see the BT light blinking.

Well, just have to soft reset to bring it back. Weird... :roll:

[hanza]

If I turn it ON it turns it self OFF when going to landscape.
Not the real issue just an observation.

BIG TNX TO ALL YOU UNBELIEVABLE PEOPLE :)

[rashe30]

help with 2.06 it is telling me that the password 0x20040304 is incorrect for the NK file??

[skenliv]

my god, there is so many updates for this phone now that im getting tired!

I think il wate for the bugs to come out, and a newer version.
Seems like a waste of time to upgrade now, and then do it again later.

[hbahaie]

I ve successfuly upgraded my imate

ROM: 2.06.00WWE
Date: 6/14/04
Radio: 1.14.00
Extended: 2.06.100a

now, the question is what is the difference between radio 1.14 and 1.18, I was using radio 1.17 very stable. And how to upgrade to radio 1.18 while keeping ROM 2.06 of DCS and not 2.02.

thanks

[mann2]

I used the Mystery Man ROM and the 1.18 Radio from mamaich.

So far so good! Thanks to all the brave pioneers, specially to dcs et al!

[Anonymous]

Help me ASAP...

How can i put the extended rom? ive already downloaded the er2003edit. What file should i open? nk or ms?

Tnx

[afterlife]

Use the editor and "Open ROM Image" then in the "Files of Type" select "WM2003 Extended ROM (ms_.nbf)". Then select the folder and locate the file that you have.

Hope that helps.

[FOSA]

Hi!


As I'm using the WM2003SE now could somebody point me to some sites where I can get FREE VGA themes.

Thanks :D

[hbahaie]

Mann2

how to use the 1.18 radio from mamaich, do u mean extracting the radio file and put with mystery man files while upgrading or there is a way to upgrade radio only after normal upgrading with mystery man rom. thanks in advance

[Anonymous]

Tnx afterlife.. i didnt know that i need to choose first in the file type... Tnx.. Thats why im gettin error cuz i am choosing the wrong file type...

[FOSA]

Hi hbahaie,


Either way is possible. Anyway both ways still require you to hard reset your device

:lol:

[hanza]

rom from unnamed
radio 1.18
and I do not have gprs separate icon as someone with the same rom and 1.14 does (or saying that he does)

is 1.14 newer/better than 1.18 ?? and why is it with wm2003 se, maybe the lower number doesn't mean it's older ??

[twinkle]

Hi DCS! I have successfully upgraded my unit using your WM2003 SE rom together with your ext rom... Thanks a lot! :D

Just wondering, how come there is no auto-conf... Is there any possibility to add it? I'm from Asia and I think it will be more convenient if it's going to be added, don't you think? 8) :wink:

[hbahaie]

rom from unnamed
radio 1.18
and I do not have gprs separate icon as someone with the same rom and 1.14 does (or saying that he does)

is 1.14 newer/better than 1.18 ?? and why is it with wm2003 se, maybe the lower number doesn't mean it's older ??


i agree with Hanza, please if any one has used the two radio versions, tell us what is the difference and which is the better one?

[hanza]

i'm just upgrading/downgrading to 1.14 from rom from unnamed ;) comments soon in few minutes

[hanza]

now back to 1.18, the separate icon it's not the case of the radio but nk.nbs it self, so I have no idea how someone with the same rom, extrom, radio could have other software, there must be some mistake and I had that separate icon in the chineese rom so I have to get her back, ...
does anyone of ya with rom from dcs have separate gprs icon like in chinees rom ?

[hanza]

btw for me the best was this chineese one from mamaich (my idol).
2.06 is great but if you touch the better, the good won't be enough anymore ;)

[afterlife]

I have a question on ExtendedROMUnlocker which i use on 1.72 ROM, after upgrading to the new ROM I'm not able to use that as it mention that it's not for SE.

Anyone have any idea if there's a replacement version or software that i can use to unlock and view my ExtRom?

[ezchar10]

Can the update be done on Ipaq 6365? Regraded on changing XDAII to HP. No forum like this for information & upgrade

[Anonymous]

btw for me the best was this chineese one from mamaich (my idol).
2.06 is great but if you touch the better, the good won't be enough anymore ;)

I am with you brother

[ID64]

I obtained (with many thanks to fychan) a memory image of an English version of WM2003 SE which is an earlier version than the recent Chinese release, but it is genuine English. I managed to create an installable NK.nbf file from this. Also, mamaich has provided the version 1.18 Radio upgrade included here. Many thanks to mamaich for that and also for some advice when I was building the OS nbf file. Also, mamaich has provided some CAB files for Extended ROM which I have also attached here separately.

Attached is an upgrade for Himalaya devices to WM2003 SE WWE, Radio 1.18. Unzip the attachment into a folder of your choice. The nbf files are configured for operator ID O2 and language ID WWE. If you need to change these, carry out all the steps below. If they are OK for you, go straight to step 5.

Extract the decrypted versions of the nbf files by entering the following commands at the command prompt:

xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306

Modify the operator ID in the nbfs to the value you require by entering the following commands at the command prompt substituting <operator> with the required value:

xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba

Update the crc values for each of the decrypted files by entering the following commands at the command prompt:

xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba

Encrypt the files back into the nbf files by entering the following commands at the command prompt:

xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306

Place your device in the cradle, ensuring that the cradle is plugged directly into a USB port on your PC and not to a hub and that the power supply is connected to the cradle. It is also a good idea to disable any screensavers.

Run HimaUpgradeUt.exe

Sit back and wait for the Congratulations screen to be displayed on your PC. Your device will still be displaying 'Upgrading radio stack, please wait', but as long as the PC says it is done, then its all OK.

Notes: I have installed this upgrade on my XDA II without any problems, and have also been able to revert back to the 1.72 ROM I had installed previously. I have bootloader v1.01, and I don't know whether it would be any different for later versions of bootloader.

After upgrading, a hard reset takes places and the Extended ROM is installed. I found that several applications caused a 'Application may not display properly.....' message box to appear which required tapping to dismiss. Therefore, you will need to make sure that TPDisable.exe is not run in the Config.txt script in the Extended ROM, otherwise you will not be able to respond to the messages.

Edit: I've created a .BAT file which can be run from a DOS prompt to replace steps 1-4...

Usage: OperatorUpdate operatorID
where operatorID is O2 or CDL or TMOBILE, etc.

Just unzip the attached zip file.

Hello!

I am getting Country ID error. What name of operator should I use on my -mate? I've tried WWE and it didn't work. Help. please/

[ID64]

Never mind :) It was CDL

[Yorch]

well I installed WM2k3SE and so far so good, looks way better than the original WM2k3, Intellidialler works like a charm (bye bye PhonePlus). All software works just like before. I found one bug, every once in a while I get my today screen all distorted, I have to change skin for it to go away, (I can live with it, but I just thought I should menction it.

Other than that, IT ROCKS!. Can't wait for WMP10!!!

Oh...I love the font sizing feature, now I have my font a tiny bit smaller, and looks nicer than before.

[Anonymous]

With SE rom I have such a problem: when somebody calls me(or i call sombody) and i answer to this call, automaticly turns on speaker mode.
How to fix it?


Hey Mamarich....

I've having this serious prob too....
Other than this...I'm perfectly happy with the WM2003SE

Cheers
Fei Yu

[double_ofour]

We should wait for Santa to upload the 2.20WWE in the ftp site...

We Are Waiting Santa!!!!!!!!

[johnnykok]

A BIG thank you to dcs, mamaich and everybody here in this great forum. I have successful upgraded to 2.06WWE, Radio 1.18 and using my own cooked ROM for Asia, from CDL 1.72WWE and Radio 1.17, and now my devicedata is back to normal

U S B 3 2 2 . 0 6 . 0 0 W W E P H 1 0 O 2 W WE 1 . 1 8 . 00

This is my config.txt file in ext_rom,

CAB: \Extended_ROM\CameraB70_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraB70_Streaming_reg.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\EmailWiz_v1.01.0003_NL_1027
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10
CAB: \Extended_ROM\OEM_CHS_OU_04110301.sa
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
EXEC:\Extended_ROM\TPEnable.exe
CAB: \Extended_ROM\PegasCE_sdio.2577.CAB
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset

Autoconfig.txt
;Remark
[Default]
EXEC:\Extended_ROM\DelAllStartMenu.exe
CAB: \Extended_ROM\startmenu_103wwe.CAB
CAB: \Extended_ROM\6inone.CAB
RST: Reset

[M1]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAM1_AP_20040211.sa.CAB
CAB: \Extended_ROM\M1.CAB
RST: Reset

[SingTel]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIASingTel_AP_20040211.sa.CAB
CAB: \Extended_ROM\SingTel.CAB
RST: Reset

[StarHub]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAStarHub_AP_20040211.sa.CAB
CAB: \Extended_ROM\StarHub.CAB
RST: Reset

I have combined all kind of ext_rom, and it is working fine, but in device information, the ExtROM version is missing ?? Secondly, most of the application in the config.txt will not auto install, need to click to install.

My camera is now Version 2.5 (build 15824)
Callerid Version 1.20 (build 17957)
ClearVue V2.4.381a
MMS in inbox V2.0.0.13
IntelliPad working
IntelliDialer working

Anyone have better or higher version for the software, please advise, thanks

[semis0nic]

@double_ofour

Sorry for the late reply..been busy testing and installing some apps on my xda last night :wink:

the ExtROm was extracted from the version of mysteryman ( posted by mamaich in the first page )

[ID64]

Is that MS Bluetooth stack? I thought W2K shoulb have Wildcomm? Correct me if I am wrong..

[gerald8297]

"The program you have installed may not display properly becoz it was designed for a previous version pf Windows mobile software"

Hmm.....is it mainly due to majority apps are created far back before the launch of WM2003SE or that error msg is just a bug that coz by extraction from extended rom..

Although we can just forego it by clicking the ok button, nevertheless it is very annoying whenever a new application is installed in the ppc. So anyone got the solution?

Been trying to install back all the apps to test on this latest SE. Here are the results:

1) Battery Pack Pro v1.11-Seem ok but still not specifically designed for SE version
2) Sprite Backup Plus v3.1-ok but becareful wif selective installation files only
3)Ringtonex-so far so good
4)Jgui phone profiles v3.1- 99% ok only not in SE

Will continue somemore when free.....

Best Regard

[semis0nic]

ID64 Posted: Sat Dec 04, 2004 13:05 Post subject:

--------------------------------------------------------------------------------

Is that MS Bluetooth stack? I thought W2K shoulb have Wildcomm? Correct me if I am wrong..


:arrow: Its widcomm stack coexisting with MSBT. which is working fine.

[skuld]

First of all I'd like to thank everybody for their efforts which finally allows the Himalaya devices to run WM2003SE
I've personally install ROM 2.06.00, Radio 1.18.00 and Extended ROM 2.06.100a but since I find the extended ROM a bit lacking, I've decide to cook my own Extended ROM.
This Extended ROM adds the autoconfig from the Asia ROM, blackberry services for the UK ROM, ExtendedROMUnlocker from xda-developers and other stuff from various ROMS. I've also changed the boot splash image to default o2 images.
As there is limited space for the cabs, I can't put in everything, such as Intellidialer, Intellipad, spb GPRS Monitor, Socket WLAN driver and etc.
Here is the contents of config.txt:

CAB: \Extended_ROM\ExtendedROMUnlocker.arm.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\MIDI561.sa.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraRC10_Streaming_reg.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831.CAB
CAB: \Extended_ROM\sales_service.CAB
CAB: \Extended_ROM\hk_html.CAB
CAB: \Extended_ROM\O2.CAB
CAB: \Extended_ROM\bluetooth.CAB
CAB: \Extended_ROM\cm_rm_map_o2_v3.CAB
CAB: \Extended_ROM\HTC_PocketPC_1.2.4.19_O2_England.cab
CAB: \Extended_ROM\VideoMMSB21.sa.CAB
CAB: \Extended_ROM\AudioPatch_Media.CAB
CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\Version_OU.sa.CAB
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
CPY1:\Extended_ROM\02.tsk
CPY2:\Windows\02.tsk
EXEC:\Windows\Autoconfig.exe
RST: Reset

Note that the touch panel is not disabled at all, so after installing and hard resetting, just tap ok on the dialog boxes that says the program may not display properly. Also after autoconfig, tap no when asked whether restart device now.
Finally, this Extended ROM is provided as is. It is intended to help others as this forum has certainly helped me a lot. It worked for me, but USE IT AT YOUR OWN RISK!

[xdaiiuser]

I have using er2003edit and trying to open ms_.nbf but i keep getting the following error
Error accessing image files

please advise

[Dataphd]

I have using er2003edit and trying to open ms_.nbf but i keep getting the following error
Error accessing image files

please advise

When opening the file don't use auto detect in the file type. It will then open correctly.

[FOSA]

Hi!

I was playing with the camera switching from portrait to landscape and vice versa and ends up with the camera menu stuck in the landscape mode.

Reset cannot solve the problem

Anyone has it :(

[FOSA]

Hi!

I was playing with the camera switching from portrait to landscape and vice versa and ends up with the camera menu stuck in the landscape mode.

Reset cannot solve the problem

Anyone has it :(

[chris_khho]

A BIG thank you to dcs, mamaich and everybody here in this great forum. I have successful upgraded to 2.06WWE, Radio 1.18 and using my own cooked ROM for Asia, from CDL 1.72WWE and Radio 1.17, and now my devicedata is back to normal

U S B 3 2 2 . 0 6 . 0 0 W W E P H 1 0 O 2 W WE 1 . 1 8 . 00

This is my config.txt file in ext_rom,

CAB: \Extended_ROM\CameraB70_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraB70_Streaming_reg.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\EmailWiz_v1.01.0003_NL_1027
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10
CAB: \Extended_ROM\OEM_CHS_OU_04110301.sa
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
EXEC:\Extended_ROM\TPEnable.exe
CAB: \Extended_ROM\PegasCE_sdio.2577.CAB
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset

Autoconfig.txt
;Remark
[Default]
EXEC:\Extended_ROM\DelAllStartMenu.exe
CAB: \Extended_ROM\startmenu_103wwe.CAB
CAB: \Extended_ROM\6inone.CAB
RST: Reset

[M1]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAM1_AP_20040211.sa.CAB
CAB: \Extended_ROM\M1.CAB
RST: Reset

[SingTel]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIASingTel_AP_20040211.sa.CAB
CAB: \Extended_ROM\SingTel.CAB
RST: Reset

[StarHub]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAStarHub_AP_20040211.sa.CAB
CAB: \Extended_ROM\StarHub.CAB
RST: Reset

I have combined all kind of ext_rom, and it is working fine, but in device information, the ExtROM version is missing ?? Secondly, most of the application in the config.txt will not auto install, need to click to install.

My camera is now Version 2.5 (build 15824)
Callerid Version 1.20 (build 17957)
ClearVue V2.4.381a
MMS in inbox V2.0.0.13
IntelliPad working
IntelliDialer working

Anyone have better or higher version for the software, please advise, thanks

Can you please upload your ROM here as well?

Thanks very much.

[double_ofour]

@Fosa

Reflash can solve it.... :wink:

[double_ofour]

Help the sms was gone... and the mms... there is suppose to be.. only the Outlook E-mail left... the SMS was gone and the MMS was gone...

[[Krueger]Dr.Stein]

Has anyone compared the 3 different versions of WM2003SEs?

Start - Settings - Version

2.20.07CHS : 4.21.1088 (Build 14235)
2.02.t1WWE : ?
2.06.00WWE : ?
XdaIIs : ?

Please update the informations.

Thanks Bros.

[Sin]

2.20.07CHS : 4.21.1088 (Build 14235)
2.02.t1WWE : ?
2.06.00WWE : 4.21.1088 (Build 14132)
XdaIIs : ?

[dcs]

2.20.07CHS : 4.21.1088 (Build 14235)
2.02.t1WWE : 4.21.1088 (Build 14132)
2.06.00WWE : 4.21.1088 (Build 14132)
XdaIIs : ?

Interestingly, the version I put together and the mystery man one identify themselves as the same!

[chris_khho]

Help the sms was gone... and the mms... there is suppose to be.. only the Outlook E-mail left... the SMS was gone and the MMS was gone...

Hey,

They are all within your inbox. Check it out.

Thanks to everyone that make this SE thing available to everyone....

Thanks again!!!

[darren_the]

Found a Bluetooth glitch in v2.06

Sometime the bluetooth icon on the Today screen would disappear like when switching between hard buttons or from portrait to landscape mode and vice versa. The bluetooth service, however, is still working just that the icon disappear from the Today screen.

A glitch or the responsible file is corrupted? Anyone has this problem?

:?:

yes same here
bluetooth profile will disappear once you turn on the bluetooth
backon when u switch off again....
:twisted:

[Anonymous]

2.20.07CHS : 4.21.1088 (Build 14235)
2.02.t1WWE : 4.21.1088 (Build 14132)
2.06.00WWE : 4.21.1088 (Build 14132)
XdaIIs : ?

Interestingly, the version I put together and the mystery man one identify themselves as the same!

Good job Bros!

Now if the Xda IIs / HP6365 owners are kind enough to identify their WM2003SE version here then we will know where we stand.

2.20.07CHS : 4.21.1088 (Build 14235)
2.02.t1WWE : 4.21.1088 (Build 14132)
2.06.00WWE : 4.21.1088 (Build 14132)
XdaIIs : ?
HP6365 : ?

[Anonymous]

Could someone supply a valid download link please?

And good work!

[edsub]

Guest, all links are OK.
But you have to be registered to be able to download . . .
BTW. this has been asked/answered allready a dozen times . . .

[dcs]

Could someone supply a valid download link please?

And good work!

You need to be logged in to see download links.

[edsub]

To all who have asked me: YES, I will try to put together a new ExtROM (as part of a new upgrade package) for the WM2003SE 2.06 ROM / 1.18 Radio configured for T-Mobile NL (thus also useable for T-Mobile in other countries). This will take some time however, but it ensures: We get the very latest changes & the least bugs in one.
My plan is to release somewhere in the next two weeks. As allways i will start a new thread on it when its there.

[superperry]

To all who have asked me: YES, I will try to put together a new ExtROM (as part of a new upgrade package) for the WM2003SE 2.06 ROM / 1.18 Radio configured for T-Mobile NL (thus also useable for T-Mobile in other countries). This will take some time however, but it ensures: We get the very latest changes & the least bugs in one.
My plan is to release somewhere in the next two weeks. As allways i will start a new thread on it when its there.

@ edsub:

I am looking forward to it... :) It looks it's too early for me to upgrade, just upgrade from your 1.72.903 ROM... Thanks for heads up!

For all people that working hard to get the SE working... Great JOB and More power... Thanks for everything that this forum done for us...

GREAT JOB EVERYONE!

[[Krueger]Dr.Stein]

I think the 4.21.1088 (Build 14132) version is the infamous Ozone Update version of WM2003SE.

In the mean time I am still trying to hunt down the website where I saw this Ozone version in action to confirm my suspicions.

[UNDO]

i'ts evident that is a state of art activity you done here but I've got this problem:

i've tryed to upgrade my xda from 1.72 to this SE.
the return of HimaGetDeviceData.exe was:

U S B 3 2 1 . 7 2 . 0 0 W W E
P H 1 0
C D L
W W E
1 . 7 2 . 1 2 6
1 . 1 4 . 0 0
_______________________________
i've made a bat file containing:


pause
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306


xda2nbftool -sd PH10 -so CDL -sl WWE NK.nba
xda2nbftool -sd PH10 -so CDL -sl WWe Radio_.nba


xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba



xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba

pause


_______________________________

after runing HimaUpgradeUt.exe
i've got folowing message:

Error 120:country id error
5-5-3-N-3
The rom image that you are tying to use is not designed to work
with your PocketPC
___________________________________



AND MY XDA STUCK in something

USB





v 1.06
_________________________


So "help me Oby One Knobi, you're my only hope"

[dcs]

... i've made a bat file containing:


pause
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306


xda2nbftool -sd PH10 -so CDL -sl WWE NK.nba
xda2nbftool -sd PH10 -so CDL -sl WWe Radio_.nba


xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba



xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba

pause
.......
Looking at what you have put as the contents of the bat file, you have not encrypted the nba files back into nbf files. You have updated the checksum twice instead. This means you were using the original nbf files, untouched. Once you have sorted that out, you should be able to just re-run the upgrade.

[dcs]

Dr.Stein]I think the 4.21.1088 (Build 14132) version is the infamous Ozone Update version of WM2003SE.

In the mean time I am still trying to hunt down the website where I saw this Ozone version in action to confirm my suspicions.
What is this ozone update you mention, Dr.Stein?

[[Krueger]Dr.Stein]

Dr.Stein]I think the 4.21.1088 (Build 14132) version is the infamous Ozone Update version of WM2003SE.

In the mean time I am still trying to hunt down the website where I saw this Ozone version in action to confirm my suspicions.

Sorry UNDO I gotta get this WM2003SE version build obsession out of my system.

Alright found the thread right here.

Ozone Update (http://forum.xda-developers.com/viewtopic?t=8933#43222)

What is this ozone update you mention, Dr.Stein?

FYI dcs AFAIK Ozone Update is (Build 14049) Beta.

That means (Build 14132) is genuine. But how far is it from the latest English/WWE one?

Xda IIs and HP6365 owners please post your WM2003SE versions. Thanks.

[dcs]

Dr.Stein]...That means (Build 14132) is genuine. But how far is it from the latest English/WWE one?....
Assuming that there is a 'latest official' English/WWE version then there are several builds after this one, using the CHS version as a guide.

[UNDO]

:?

so

i've just used the OperatorUpdate.bat CDL

and after HimaUpgradeUt.exe the message is:


ERROR 120: COUNTRY ID ERROR 5-5-8-N-8
etc

:shock:

[dcs]

:?

so

i've just used the OperatorUpdate.bat CDL

and after HimaUpgradeUt.exe the message is:


ERROR 120: COUNTRY ID ERROR 5-5-8-N-8
etc

:shock:
OK. You need to take a look at my post here (http://forum.xda-developers.com/viewtopic.php?t=12101) and carry out steps 3-5 to find out what operator your device is currently set to. It may not be what you expect, because of any previous upgrades.

[Anonymous]

With SE rom I have such a problem: when somebody calls me(or i call sombody) and i answer to this call, automaticly turns on speaker mode.
How to fix it?
Please, somebody help me to fix this bug. :(

[[Krueger]Dr.Stein]

The latest one is

Windows Mobile Second Edition version 4.21.1088(build 14260.2.0.2)

I think.

Okay alright obsession stops here. Sorry all.

[lazzy]

Removing my 1st cooked Asian ROM. Look out for new.

Sorry.

[dcs]

Interestingly, the 14132 build is the one being released with other devices such as http://209.167.114.38/support/TechSupport/TSBs/ALL/-TSB001047.htm

so it suggests it is meant to be a stable build. The WMP10 does not get included until build 14235, and indeed it looks like 14260 is the latest.

[FOSA]

So, any possibility of getting 14260 ?

:roll:

[[Krueger]Dr.Stein]

Interestingly, the 14132 build is the one being released with other devices such as http://209.167.114.38/support/TechSupport/TSBs/ALL/-TSB001047.htm

so it suggests it is meant to be a stable build. The WMP10 does not get included until build 14235, and indeed it looks like 14260 is the latest.

Found 14260 from an update from Dell that includes WMP10. They provide it as images.

If only.

[Rico83]

Dr.Stein]Interestingly, the 14132 build is the one being released with other devices such as http://209.167.114.38/support/TechSupport/TSBs/ALL/-TSB001047.htm

so it suggests it is meant to be a stable build. The WMP10 does not get included until build 14235, and indeed it looks like 14260 is the latest.

Found 14260 from an update from Dell that includes WMP10. They provide it as images.

If only.
i downloaded the dell update that has the images, couldnt open it,
also downloaded an update for the hp rx something, that was a .nbf file
couldnt open that also, it asked for a password.

regards

[gelo]

this is great! :D thanks

[[Krueger]Dr.Stein]

Upgraders and updaters any screenshots or bugs manifest please?

[FOSA]

Hello DR


Read here:-

http://forum.xda-developers.com/viewtopic.php?p=71184#71184

[unapproachable2kx]

it is more simple extract Wmp10 from CHT rom,not from other companies like hp,etc..

[UNDO]

I manage to obtain the original from the “TIM” website ( the 1.6 version) and after install the result was

U S B 3 2 1 . 6 6 . 0 4 I T A
P H 1 0
Q t e k
I T A
1 . 6 6 . 1 9 2
1 . 1 0 . 0 0

Qtek ????!!!!!


Now I’m doing the upgrade to SE .



thanks a million and keep up the good work

[[Krueger]Dr.Stein]

I manage to obtain the original from the “TIM” website ( the 1.6 version) and after install the result was

U S B 3 2 1 . 6 6 . 0 4 I T A
P H 1 0
Q t e k
I T A
1 . 6 6 . 1 9 2
1 . 1 0 . 0 0

Qtek ????!!!!!


Now I’m doing the upgrade to SE .



thanks a million and keep up the good work

That makes the two of us Bro. How on earth did my O2 Xda II turned into a Qtek?

Tried to revert back to O2 using the nbftools but to no avail.

Anyone?

[Effan]

Dr.Stein]The latest one is

Windows Mobile Second Edition version 4.21.1088(build 14260.2.0.2)

I think.

Okay alright obsession stops here. Sorry all.

I have

I-mate PDA2K
4.21.1088 (Build 14132)

[dcs]

Dr.Stein]I manage to obtain the original from the “TIM” website ( the 1.6 version) and after install the result was

U S B 3 2 1 . 6 6 . 0 4 I T A
P H 1 0
Q t e k
I T A
1 . 6 6 . 1 9 2
1 . 1 0 . 0 0

Qtek ????!!!!!


Now I’m doing the upgrade to SE .



thanks a million and keep up the good work

That makes the two of us Bro. How on earth did my O2 Xda II turned into a Qtek?

Tried to revert back to O2 using the nbftools but to no avail.

Anyone?

You have fallen foul of the 'hidden' data in an ms_.nbf file that changes your device settings! Look at my post here (http://forum.xda-developers.com/viewtopic.php?t=12101) for details on how to fix it.

[bezzita]

This is my first share and since i usually only travel to Malaysia, Singapore, Hong Kong, Thailand and Philippines, my autoconfig only covers these country mobile providers. Was able to squeeze IntelliPad, IntelliDialer and SPB GRPS Monitor; leaving only 28kb of free space :P

ROM: 2.06WWE (got it from windowsmobile2003se.exe)
Radio: 1.18 (mamaich and dcs)
ExtROM: 2.06.100a (modified skuld, mamaich, djrm and can't remember if anyone else)
for 02 device with language set as WWE

Autoconfig.txt
----------------
;Remark
[Default]
EXEC:\Extended_ROM\DelAllStartMenu.exe
CAB: \Extended_ROM\startmenu_103wwe.CAB
CAB: \Extended_ROM\6inone.CAB
RST: Reset

[AIS]
CAB: \Extended_ROM\O2ASIAAIS_AP_20040211.sa.CAB
CAB: \Extended_ROM\AIS.CAB
RST: Reset

[Celcom]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIACelcom_AP_20040211.sa.CAB
CAB: \Extended_ROM\Celcom.CAB
RST: Reset

[DiGi]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIADiGi_AP_20040211.sa.CAB
CAB: \Extended_ROM\DiGi.CAB
RST: Reset

[DTAC]
CAB: \Extended_ROM\O2ASIADTAC_AP_20040211.sa.CAB
CAB: \Extended_ROM\DTAC.CAB
RST: Reset

[Globe]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAGlobe_AP_20040211.sa.CAB
CAB: \Extended_ROM\Globe.CAB
RST: Reset

[M1]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAM1_AP_20040211.sa.CAB
CAB: \Extended_ROM\M1.CAB
RST: Reset

[Maxis]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAMaxis_AP_20040211.sa.CAB
CAB: \Extended_ROM\Maxis.CAB
RST: Reset

[Orange Hong Kong]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAOrange_AP_20040211.sa.CAB
CAB: \Extended_ROM\Orange.CAB
RST: Reset

[SingTel]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIASingTel_AP_20040211.sa.CAB
CAB: \Extended_ROM\SingTel.CAB
RST: Reset

[Smart]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\smart_default.CAB
CAB: \Extended_ROM\O2ASIASmart_AP_20040211.sa.CAB
CAB: \Extended_ROM\Smart.CAB
RST: Reset

[StarHub]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAStarHub_AP_20040211.sa.CAB
CAB: \Extended_ROM\StarHub.CAB
RST: Reset


Config.txt
-----------
CAB: \Extended_ROM\ExtendedROMUnlocker.arm.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\MIDI561.sa.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraRC10_Streaming_reg.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831.CAB
CAB: \Extended_ROM\sales_service.CAB
CAB: \Extended_ROM\hk_html.CAB
CAB: \Extended_ROM\O2.CAB
CAB: \Extended_ROM\bluetooth.CAB
CAB: \Extended_ROM\cm_rm_map_o2_v3.CAB
CAB: \Extended_ROM\HTC_PocketPC_1.2.4.19_O2_England.cab
CAB: \Extended_ROM\VideoMMSB21.sa.CAB
CAB: \Extended_ROM\AudioPatch_Media.CAB
CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\Version_OU.sa.CAB
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\spb_gprs_v2.20(build487)_magician_ww e_1007_cid.cab
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
CPY1:\Extended_ROM\02.tsk
CPY2:\Windows\02.tsk
EXEC:\Windows\Autoconfig.exe
RST: Reset

Since i just upgraded mine to this version, it has not been fully tested so use at your own RISK.

I would like to thank dcs, edsub, mamaich, djrm, skuld, ZeroXtreme for their contribution.

Cheers!

May I know how can I modify this ROM? Everytime I open ms_.nbf file, ER2003edit always ask the password.

I just want to custom made the Autoconfig for Australian, Indonesian and Singapore providers.

Please help.

[SimonAlbion]

This is my first share and since i usually only travel to Malaysia, Singapore, Hong Kong, Thailand and Philippines, my autoconfig only covers these country mobile providers. Was able to squeeze IntelliPad, IntelliDialer and SPB GRPS Monitor; leaving only 28kb of free space :P

ROM: 2.06WWE (got it from windowsmobile2003se.exe)
Radio: 1.18 (mamaich and dcs)
ExtROM: 2.06.100a (modified skuld, mamaich, djrm and can't remember if anyone else)
for 02 device with language set as WWE

Autoconfig.txt
----------------
;Remark
[Default]
EXEC:\Extended_ROM\DelAllStartMenu.exe
CAB: \Extended_ROM\startmenu_103wwe.CAB
CAB: \Extended_ROM\6inone.CAB
RST: Reset

[AIS]
CAB: \Extended_ROM\O2ASIAAIS_AP_20040211.sa.CAB
CAB: \Extended_ROM\AIS.CAB
RST: Reset

[Celcom]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIACelcom_AP_20040211.sa.CAB
CAB: \Extended_ROM\Celcom.CAB
RST: Reset

[DiGi]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIADiGi_AP_20040211.sa.CAB
CAB: \Extended_ROM\DiGi.CAB
RST: Reset

[DTAC]
CAB: \Extended_ROM\O2ASIADTAC_AP_20040211.sa.CAB
CAB: \Extended_ROM\DTAC.CAB
RST: Reset

[Globe]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAGlobe_AP_20040211.sa.CAB
CAB: \Extended_ROM\Globe.CAB
RST: Reset

[M1]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAM1_AP_20040211.sa.CAB
CAB: \Extended_ROM\M1.CAB
RST: Reset

[Maxis]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAMaxis_AP_20040211.sa.CAB
CAB: \Extended_ROM\Maxis.CAB
RST: Reset

[Orange Hong Kong]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAOrange_AP_20040211.sa.CAB
CAB: \Extended_ROM\Orange.CAB
RST: Reset

[SingTel]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIASingTel_AP_20040211.sa.CAB
CAB: \Extended_ROM\SingTel.CAB
RST: Reset

[Smart]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\smart_default.CAB
CAB: \Extended_ROM\O2ASIASmart_AP_20040211.sa.CAB
CAB: \Extended_ROM\Smart.CAB
RST: Reset

[StarHub]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIAStarHub_AP_20040211.sa.CAB
CAB: \Extended_ROM\StarHub.CAB
RST: Reset


Config.txt
-----------
CAB: \Extended_ROM\ExtendedROMUnlocker.arm.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CA B
CAB: \Extended_ROM\MIDI561.sa.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraRC10_Streaming_reg.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0831.CAB
CAB: \Extended_ROM\sales_service.CAB
CAB: \Extended_ROM\hk_html.CAB
CAB: \Extended_ROM\O2.CAB
CAB: \Extended_ROM\bluetooth.CAB
CAB: \Extended_ROM\cm_rm_map_o2_v3.CAB
CAB: \Extended_ROM\HTC_PocketPC_1.2.4.19_O2_England.cab
CAB: \Extended_ROM\VideoMMSB21.sa.CAB
CAB: \Extended_ROM\AudioPatch_Media.CAB
CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\Version_OU.sa.CAB
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\spb_gprs_v2.20(build487)_magician_ww e_1007_cid.cab
EXEC:\Extended_ROM\BTPSKeyUpdate_003.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
CPY1:\Extended_ROM\02.tsk
CPY2:\Windows\02.tsk
EXEC:\Windows\Autoconfig.exe
RST: Reset

Since i just upgraded mine to this version, it has not been fully tested so use at your own RISK.

I would like to thank dcs, edsub, mamaich, djrm, skuld, ZeroXtreme for their contribution.

Cheers!

DRJM do you fancy doing an allin one downloadable file like the one above but for Orange UK M1000 users.There are so many links and threads at the moment for the less competent of us its a tad confusing!

[fruitloaf]

I've successfully installed this ROM on my M1000. I started off with the 2.06 rom but that crashed with an SD card in (wouldn't power back on after turning off). Tried the 2.02 and have had no problems since.

Even better WM2003 SE supports BT handsfree profile! I can now flip open my Motorola HS810 headset to answer a call and use the button to make calls without touching the phone. Worth the upgrade just for that!

[[Krueger]Dr.Stein]

Good job!

My O2 Xda II is now an O2 Xda IIs!

:twisted:

100% tested and flawless.

[kaka]

I dont know why I can not upgrade to WM2003se althought I did everything follow instruction but still report country ID code error???
Help me pls!
XDAII, thanks in advance

[xda-rocks]

can anyone tell me what the 6inone.cab does?

[[Krueger]Dr.Stein]

2.20.07CHS : 4.21.1088 (Build 14235)

2.02.t1WWE : 4.21.1088 (Build 14132)
2.06.00WWE : 4.21.1088 (Build 14132)
XdaIIs : 4.21.1088 (Build 14132)

Latest Update : 4.21.1088(build 14260.2.0.2)

[DavidWuyts]

Is there someone who can post an updated rom here for my imate wwe
because i cant manage to fix the country code error

Thank you in advance

Keep up the good work on this

David

[SimonAlbion]

I've successfully installed this ROM on my M1000. I started off with the 2.06 rom but that crashed with an SD card in (wouldn't power back on after turning off). Tried the 2.02 and have had no problems since.

Even better WM2003 SE supports BT handsfree profile! I can now flip open my Motorola HS810 headset to answer a call and use the button to make calls without touching the phone. Worth the upgrade just for that!

Fruitloaf

which files did you use?

[Rico83]

I've successfully installed this ROM on my M1000. I started off with the 2.06 rom but that crashed with an SD card in (wouldn't power back on after turning off). Tried the 2.02 and have had no problems since.

Even better WM2003 SE supports BT handsfree profile! I can now flip open my Motorola HS810 headset to answer a call and use the button to make calls without touching the phone. Worth the upgrade just for that!

Fruitloaf

which files did you use?
simon check the extended rom that i posted (link) for, its for orange uk users, it should be ideal for you, just le me know what u need and ill be glad to help you out,

regards

[istana_pulau_es]

Dr.Stein]Good job!

My O2 Xda II is now an O2 Xda IIs!

:twisted:

100% tested and flawless.



So your ext ROM is now compatible with WM2003 SE.
Would you please upload your ext ROM in this forum.
Thx in advance.

[[Krueger]Dr.Stein]

It is the Asian O2 Xda IIs Extended ROM Bro.

But of course I added a few wicked Extended Extended ROM of my own.

[Anonymous]

Had the same problems (this was my first time) but got it to work by:

Replacing "WWE" in the following instructions (from an earlier post) with the Language shown in the "DeviceData.txt" file created by the Himagetdevicedata.exe (in my case it was "GER") -please look to the end of this post for further important info

Extract the decrypted versions of the nbf files by entering the following commands at the command prompt:

Code:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306

Modify the operator ID in the nbfs to the value you require by entering the following commands at the command prompt substituting <operator> with the required value:

Code:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba



Update the crc values for each of the decrypted files by entering the following commands at the command prompt:

Code:
xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba



Encrypt the files back into the nbf files by entering the following commands at the command prompt:

Code:
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306


But also needed to do these additional steps before upgrading:

xda2nbftool -x MS_.nbf MS_.nba 0x20040305
xda2nbftool -sd PH10 -so <operator> -sl <language> MS_.nba
xda2nbftool -c -u MS_.nba
xda2nbftool -x MS_.nba MS_.nbf 0x20040305

By the way the resulting install was in english not in GER.

Runs beautifully! Thanks to all involved, you guys rule!

Cheers,

Martin

[/b]

[Anonymous]

is official version??