Best PDA2K case (4 links to current cases)

[sorci]

BEST Case for PDA2K/XDAIII ?

I'm having hard time deciding as to what would
be the best case for my PDA2K. The case that comes with it
is very uncofortable and hard to take the pda quickly out of it
when you have a call.

Up till now, I've found 4 cases that were designed
especially for the i-mate. I would have preferred an
aluminium hightech looking case as opposed to elegant leather
case which kinda 'hides' the gadget, but all I found was leather
cases. I also don't know what would be more confortable the flip
or the book style type.

speically built and suited for the PDA2K but there is'tas well, as my preferance i

Proporta Alu-Leather Book Type ($40)
=========================
http://www.proporta.com/F02/PPF02P05.php?t_id=975&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_book.gif

Proporta Alu-Leather Flip Type ($40)
========================
http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_flip.gif

Krussel ($30)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1489/.f

Piel Frama ($60)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1445/.f

They all look good. what do you think? Also, any good aluminium case for the PDA2K? The ones I saw all fit only the imate 2020

Thanks guys

[harry_mb]

I had info from the export dept. at Pielframa that they will be previewing an alu case for the BlueAngel any time now.

[sparkyxda]

http://www.suntekstore.com/leather-case-o2-xda-iii-bi-folder.html

It's cheap and looks like the PDA clips into the case. No plastic over the keyboard either.

I'll post to let everyone one know how pleased I am with my purchase! :wink:

[rajeshr]

Any pouch type of cases available?

Regards,
RajeshR

[VW_ELM]

There is also this CASE (http://www.deshop.net/produkt_detail.asp?hgr_id=07&gr_id=02&produkt_id=0702CVTQTK90BL)

and THIS ONE (http://www.deshop.net/produkt_detail.asp?hgr_id=07&gr_id=04&produkt_id=0704PDRQTK90BL)

[outz]

I just preordered this one:

http://www.innopocket.com/web/showProductDetail.asp?ID=126

[bigblk150]

outz,

When are you expecting your Innopocket case? I have a few questions:

1. Are the application buttons above the D-Pad accessible through the case? It looks like they will be hidden.
2. How is your WiFi reception? Talk is that WiFi in general with the Blue Angel isn't very good, but I'd think putting the device in a "metal box" will make it even worse.

Keep us posted.

Thanks!

[sorci]

I didn't think about the Aluminium case will block WiFi making the poor reception of the PDA2K even poorer (can it get worse than that? lol)

My guess is that an aluminium case may make the WiFi even poorer, I think I'll go a leather case as this seems to be the only viable choice.

[bigblk150]

My guess is that an aluminium case may make the WiFi even poorer, I think I'll go a leather case as this seems to be the only viable choice.

That's what I'm thinking. I was hoping that Vaja (http://www.vajacases.com) would make a semi-rigid leather case for the Blue Angel as they did for the XDA II, but when I emailed their support group, I was told they will not be making a case for the Blue Angel at all.

Bummer...

[Anonymous]

Hi,

Did find this link they have 5 Cases

http://www.imate-shop.com/index.php?currency=USD&cPath=49_50&sort=2a

[j_metselaars]

Anyone has the alu case already? Also wondering how long shipping would take!!!

[outz]

Still waiting on my aluminum case...

[j_metselaars]

Still waiting on my aluminum case...

When did you order and is it shipped already???

[VoodooEx]

Any pouch type of cases available?

Regards,
RajeshR

You might want to take a look at this.

http://www.tuff-as-nuts.com/t-mobile-mda-iii-qtek-9090-o2-xda-1ii-imate-pda2k.html

[rajeshr]

Any pouch type of cases available?

Regards,
RajeshR

You might want to take a look at this.

http://www.tuff-as-nuts.com/t-mobile-mda-iii-qtek-9090-o2-xda-1ii-imate-pda2k.html

Saw that and have ordered one. :-)

Thanks,
Rajesh

[outz]

Still waiting on my aluminum case...

When did you order and is it shipped already???

I preordered a month ago... I just received a tracking number today showing it will be here tomorrow.

[j_metselaars]

Still waiting on my aluminum case...

When did you order and is it shipped already???

I preordered a month ago... I just received a tracking number today showing it will be here tomorrow.

You ordered with Fedex shipping?

[outz]

yeah... otherwise it said delivery 2-4 weeks since it was shipped from hong kong. (or something like that)

[VoodooEx]

Any pouch type of cases available?

Regards,
RajeshR

You might want to take a look at this.

http://www.tuff-as-nuts.com/t-mobile-mda-iii-qtek-9090-o2-xda-1ii-imate-pda2k.html

Saw that and have ordered one. :-)

Thanks,
Rajesh

Nice! I'm still waiting for mine.

[outz]

I just received my innopocket aluminum case. It's great! custom cutouts for the blinking leds, 5-way pad, answer/hangup, speaker, mic, ir, camera button, record, volume, power button, headphones, reset, and even a slider to cover up/uncover the camera when you need it. You are able to flip the front door upwards and slide out the kboard when you need it.

[outz]

attention. The hole (which I thought was for the mic), is actually for the reset button only. When the case is shut, the other party can not hear you. You have to open the case for them to be able to understand what you are saying. I've contacted the maker about this and am awaiting a response.

[j_metselaars]

attention. The hole (which I thought was for the mic), is actually for the reset button only. When the case is shut, the other party can not hear you. You have to open the case for them to be able to understand what you are saying. I've contacted the maker about this and am awaiting a response.

Let us know as soon as possible when you receive your answer! I receive my case tomorrow, so that is a huge fault if that's true!!

Hope you could tell us very soon!!

[outz]

I received a response from a guy claiming to be the engineer of the case. He was very greatful that I informed him of this flaw. He said he is correcting the design and it would be implemented in the next batch of cases, and that he would also mail it to me at no charge. So if yours has the same flaw (which I'm sure it will) you should probably contact them, and from my experience it should be no problem getting another.

[Anonymous]

attention. The hole (which I thought was for the mic), is actually for the reset button only. When the case is shut, the other party can not hear you. You have to open the case for them to be able to understand what you are saying. I've contacted the maker about this and am awaiting a response.

Thanks so much for bringing this to our attention! Stupid me, I guess, As I thought the microphone was cleverly hidden behind the D-pad (seems like it would have made more sense to place the mic there since that's where my mouth is instead of the back of the device). I have the Verizon EVDO VX6600 version of this phone, BTW, and it rocks! Although, it doesn't have the camera so I was glad to hear of the sliding door to cover in your previous post. I'll be leaving my door closed -- and locked all the time from now on!

Questions:

Can you tap the screen through the clear plastic cover giving the device true, full-functionality (and adding a screen saver to it to boot!) or is it merely for viewing the screen through? Does the quality of the plastic screen appear to hold up against scratches (hey, maybe another screen saver is needed -- a screen saver for the screen saver, so to speak!) ?

How does the hinge mechanism work, is it a double hinge? The photo in their link:
http://www.innopocket.com/web/showProductDetail.asp?ID=126
shows the flip screen folded all the way back against the back of the device so it's either an extremely flexible hinge or a double hinge; the latter I'm thinking. Does the hinge look like it will stand up to wear or will it pop out?

Finally, any scratches to your device as a result of this case as one poster in another thread reported with previous innopocket cases?

Sincere thanks in advance for addressing these questions; this was really the only case I've given any thought to, and if the responses to the above Q's are favorable; I'm going to order one of the updated designed cases -- once they've addressed the microphone hole situation that is!

[outz]

Kahuna]
Questions:

Can you tap the screen through the clear plastic cover giving the device true, full-functionality (and adding a screen saver to it to boot!) or is it merely for viewing the screen through? Does the quality of the plastic screen appear to hold up against scratches (hey, maybe another screen saver is needed -- a screen saver for the screen saver, so to speak!) ?

How does the hinge mechanism work, is it a double hinge? The photo in their link:
http://www.innopocket.com/web/showProductDetail.asp?ID=126
shows the flip screen folded all the way back against the back of the device so it's either an extremely flexible hinge or a double hinge; the latter I'm thinking. Does the hinge look like it will stand up to wear or will it pop out?

Finally, any scratches to your device as a result of this case as one poster in another thread reported with previous innopocket cases?

Sincere thanks in advance for addressing these questions; this was really the only case I've given any thought to, and if the responses to the above Q's are favorable; I'm going to order one of the updated designed cases -- once they've addressed the microphone hole situation that is!

It is a double hinge. You grab it at the bottom and flip it upwards. The double hinge conencts to a piece of hard plastic, which makes it pretty flexable. I believe the hinge will stand up to wear. I havent any scratches yet on my device, but ive only taken in it/out a few dozen times. The plastic screen is merely for viewing. I do believe this screen can/will be scratched, as I can already see a few on mine if I turn it the correct way. I also dislike opening the door to the case. I wish it was a little easier. also, when the door is shut, you can't charge the phone. You must open the door slightly to expose the port used for charging... this isnt terrible, but I have a mount kit for my phone, and I usually charge it while it is mounted.

[outz]

So did anyone else get theirs?

[j_metselaars]

Yep, I got mine and today I received an email that they sent me a new version of the case, with Microphone cutout!

Rest of the case seems good to me! I only wonder if the slider for the camera doesn't scratch the back of the phone?! Does anyone know?

[outz]

Great! It looks like when I reported the flaw in the design it caused a week or so delay on shipped out units. They sent me a tracking number for a new version of the case... it should be here in a few days. I went ahead and drilled a mic hole in the old case... guess ill just ebay one of them.

[j_metselaars]

Today I received the new case and they fixed it!!! Added picture to show! Now we can use it as it should be!

Excellent service from innopocket!!! They rock!!

[VoodooEx]

Any pouch type of cases available?

Regards,
RajeshR

You might want to take a look at this.

http://www.tuff-as-nuts.com/t-mobile-mda-iii-qtek-9090-o2-xda-1ii-imate-pda2k.html

I've received mine. Some picture of it:

http://www.voodooex.uni.cc/nutshell-1.jpg
http://www.voodooex.uni.cc/nutshell-2.jpg
http://www.voodooex.uni.cc/nutshell-3.jpg
http://www.voodooex.uni.cc/nutshell-4.jpg
http://www.voodooex.uni.cc/nutshell-5.jpg
http://www.voodooex.uni.cc/nutshell-6.jpg
http://www.voodooex.uni.cc/nutshell-7.jpg

[Anonymous]

BEST Case for PDA2K/XDAIII ?

I'm having hard time deciding as to what would
be the best case for my PDA2K. The case that comes with it
is very uncofortable and hard to take the pda quickly out of it
when you have a call.

Up till now, I've found 4 cases that were designed
especially for the i-mate. I would have preferred an
aluminium hightech looking case as opposed to elegant leather
case which kinda 'hides' the gadget, but all I found was leather
cases. I also don't know what would be more confortable the flip
or the book style type.

speically built and suited for the PDA2K but there is'tas well, as my preferance i

Proporta Alu-Leather Book Type ($40)
=========================
http://www.proporta.com/F02/PPF02P05.php?t_id=975&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_book.gif

Proporta Alu-Leather Flip Type ($40)
========================
http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_flip.gif

Krussel ($30)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1489/.f

Piel Frama ($60)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1445/.f

They all look good. what do you think? Also, any good aluminium case for the PDA2K? The ones I saw all fit only the imate 2020

Thanks guys

did anyone buy a case from www.executivepda.com, i placed my order on Dec.16 2004, until now i still not yet received my order, but the payment already charged to my credit card, i email them last week, they replied me they delivered case on dec.16, 2004.via usps, regularly will be arrive 10 days, they asked me to call local post office, but they cant provide track no, but they can send mail receipt to me, i called local ups office, they need waybill no or track no. i email net store again request for no of way bill on jan9,2005, but until now i still not yet receive any reply, i don't know what happened. anyone has experienced thsi? i am in philipppines.

[rajeshr]

I've received mine. Some picture of it:


Thanks for the pictures. How do you find the process of pulling the XDA out from the case when you receive a phone call? Does the phone come out easily or do you need a lot of effort to do so?

I've already ordered my case - but it would be nice to get your opinion! BTW, is that the crocodile black?

Regards,
Rajesh

[VoodooEx]

I've received mine. Some picture of it:


Thanks for the pictures. How do you find the process of pulling the XDA out from the case when you receive a phone call? Does the phone come out easily or do you need a lot of effort to do so?

I've already ordered my case - but it would be nice to get your opinion! BTW, is that the crocodile black?

Regards,
Rajesh

Compared to the original case that come with the IIs, this new case take a bit more effort to pull it out. It is quite tight. Everytime I need to tak it out, I need to push from the bottom of the case upwards for a few cm, then use my thumb and index finger to pull it out at the speaker area.

Sounds complicated, but it's really easy once you get used to it. Furthermore, the tightness worn off slowly from daily usage.

Btw, I used a BT headset to answer call, so I seldom need to pull it out for phone call. :)

[HPJ]

Surprised no-one's mentioned

http://www.pdair.com

They have got loads of cases at ok prices. And they seem to have branches in most countries. Here is the UK one:

http://www.pdairshop.co.uk/index.php

Anyone bought from them? I'm thinking of getting a leather case like this:

http://www.pdairshop.co.uk/product_info.php?products_id=244

only £20.

Also --- book style or file style??!!?!

HPJ

[DougWeller]

I really hate belt clips, sooner or later my device comes off.

And I don't want metal as it impedes reception.

I think I shall be forced to go for tuff-as-nuts.

Doug

[outz]

no reception difference at all with my aluminum case. I used the MY|Phone app which gives you the reception %

[hdbueller]

I have 2 different cases for mine. I have a PDA Skins fully-enclosed zipper opening flip-down case that allows the unit to be operated in the open position, and a Krussel leather flip-open snap case. They are both very good for different reasons. I was going to get an aluminum case,but read in several forums that they can reduce reception of calls significantly.
Later 8)

BEST Case for PDA2K/XDAIII ?

I'm having hard time deciding as to what would
be the best case for my PDA2K. The case that comes with it
is very uncofortable and hard to take the pda quickly out of it
when you have a call.

Up till now, I've found 4 cases that were designed
especially for the i-mate. I would have preferred an
aluminium hightech looking case as opposed to elegant leather
case which kinda 'hides' the gadget, but all I found was leather
cases. I also don't know what would be more confortable the flip
or the book style type.

speically built and suited for the PDA2K but there is'tas well, as my preferance i

Proporta Alu-Leather Book Type ($40)
=========================
http://www.proporta.com/F02/PPF02P05.php?t_id=975&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_book.gif

Proporta Alu-Leather Flip Type ($40)
========================
http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_flip.gif

Krussel ($30)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1489/.f

Piel Frama ($60)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1445/.f

They all look good. what do you think? Also, any good aluminium case for the PDA2K? The ones I saw all fit only the imate 2020

Thanks guys

[hdbueller]

I have dealt with ExecutivePDA on 2 seperate occasions,and they were always reliable and provided fast shipment. Their email support was very good too.
Later 8)


BEST Case for PDA2K/XDAIII ?

I'm having hard time deciding as to what would
be the best case for my PDA2K. The case that comes with it
is very uncofortable and hard to take the pda quickly out of it
when you have a call.

Up till now, I've found 4 cases that were designed
especially for the i-mate. I would have preferred an
aluminium hightech looking case as opposed to elegant leather
case which kinda 'hides' the gadget, but all I found was leather
cases. I also don't know what would be more confortable the flip
or the book style type.

speically built and suited for the PDA2K but there is'tas well, as my preferance i

Proporta Alu-Leather Book Type ($40)
=========================
http://www.proporta.com/F02/PPF02P05.php?t_id=975&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_book.gif

Proporta Alu-Leather Flip Type ($40)
========================
http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des
detailed pic: http://www.proporta.com/F03/i/alu_leather_XdaIIs_flip.gif

Krussel ($30)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1489/.f

Piel Frama ($60)
===========
http://www.executivepda.com/s.nl/sc.7/category.367/it.A/id.1445/.f

They all look good. what do you think? Also, any good aluminium case for the PDA2K? The ones I saw all fit only the imate 2020

Thanks guys

did anyone buy a case from www.executivepda.com, i placed my order on Dec.16 2004, until now i still not yet received my order, but the payment already charged to my credit card, i email them last week, they replied me they delivered case on dec.16, 2004.via usps, regularly will be arrive 10 days, they asked me to call local post office, but they cant provide track no, but they can send mail receipt to me, i called local ups office, they need waybill no or track no. i email net store again request for no of way bill on jan9,2005, but until now i still not yet receive any reply, i don't know what happened. anyone has experienced thsi? i am in philipppines.

[VoodooEx]

For a flip-up leather case, I would recommend the Slipper case by EBCases.com.

Why?

1) Very good belt clip system. Sturdy, ergonomic to take out and clip in. Imo, the system is better than Piel Frama and Krusell's clip.

2) The metal piece for the clip is slightly higher than the centre of gravity of the leather case. This is to prevent it from rotating while it is hanging on your belt clip. I hate it when my phone is running "wild" on my belt. :)

3) It uses soft leather. I prefer soft leather.

[DougWeller]

For a flip-up leather case, I would recommend the Slipper case by EBCases.com.

Why?

1) Very good belt clip system. Sturdy, ergonomic to take out and clip in. Imo, the system is better than Piel Frama and Krusell's clip.

2) The metal piece for the clip is slightly higher than the centre of gravity of the leather case. This is to prevent it from rotating while it is hanging on your belt clip. I hate it when my phone is running "wild" on my belt. :)

3) It uses soft leather. I prefer soft leather.

But it's backordered.

Maybe I'm the only one who finds that belt clips sometimes twist off the belt? I prefer to have the belt run through a loop.

It does look nice though.

Doug

[sparkyxda]

This case delivered today

http://store.yahoo.com/pda-mart/leather-case-o2-xda-iii-bi-folder.html

It's OK for the money.

Here's some more pics

[/img]

[mahadewa]

I ordered one from Covertec, still waiting for delivery.

www.covertec.com/

[xanth]

I bought:

http://www.accessorystore.co.uk/acatalog/Krusell_Leather_Holster_for_XDA2.html

And it arrived today. It's a pouch type case, but that's the sort I wanted. It says for XDA 2, but I took a chance and it's great - fits the XDA IIs perfectly. Very happy with it and easy to get in/out quickly + comes with the usual Krussel removable belt attachment etc for just putting in pocket!

http://www.accessorystore.co.uk/acatalog/krusell_holster_pda.jpg

[rakh1]

Maybe someone can help me here...

With my XDA2 the belt clip was always coming undone - fine for strolling around hte office, but running, climbing stairs or simly turning around too fast and *pop* off it would come.

My new XDA2s has a much better belt clip - *BUT* it is a nightmare to get the phone out of the case when you need it.

Now, all these cases look great and some of the book ones look fantastic. But what are the belt clips like....just as easy to fall off?

Rich

[sparkyxda]

Krussel cases have a range of clips. Never had a problem with them.

[leochan2005]

This is the one I am using, fit and good.

http://shop.brando.com.hk/image/bwxdaIIsleatherhardcase4.jpg

[HPJ]

I just bought this one for £25:

http://www.pdairshop.co.uk/product_info.php?products_id=243

I'll let you know what its like when it arrives next week

HPJ

[rakh1]

Hi guys,

I just bought the Brando WorkShop O2xda IIs Leather Hard Case - cost about £25ish and will be here in 10 days.

R

[wilesd]

I have one of these http://www.pdairshop.co.uk/product_info.php?products_id=244

bought it cheaper than PDAIR direct from www.pdahut.co.uk.

Case is very nice quality and fits perfect, you can access everything without removing it from case.

[pen6uin]

HPJ Posted: Fri Feb 18, 2005 14:10 Post subject:

--------------------------------------------------------------------------------

I just bought this one for £25:

http://www.pdairshop.co.uk/product_info.php?products_id=243

I'll let you know what its like when it arrives next week

HPJ

i orderd this case came next day very happy with it slots ito plastic sleeze which doubles as a protector for the keyboard.

[TubThumper]

Hi

All of the cases here seem to hang off the belt vertically, which I find to be a right pain when sitting down (even those with swivel systems like Krusell).

Anybody getting on with a case which sits on the belt horizontally (landscape mode). I actually quite like the pouch that came with it, but dont like having to get it out to use it.

Thanks

[HPJ]

Hi

Finally arrived:

http://www.pdairshop.co.uk/product_info.php?products_id=243

and very nice it is too! Really soft leather, does exactly what it says on the tin etc etc

Incidentally i ordered it from PDAir for £25, but they were out of stock, so I got it from PDAHut instead, at only £20!

HPJ

[Fourgig]

Has anyone run across a leather case that has an opening cut for the speaker? I'm currently using the case that came with the IIs and sometimes I don't hear the phone ringing because it's muffled by the case.

The Innopocket metal case seems to be the only one that doesn't cover the speaker. But it doesn't have any slots for carrying SD cards...and it's silver. I bought the IIs because I liked the dark colored case. I'd rather not cover it all up with a silver case. :wink:

[given]

Those who get the leather cases, make sure the clasp isn't on the screen. I read posts on this or another forum about cracked screens because the snap pushed against the screen. Not trying to scare anyone, but the poster said $150 (us I assumed) for repair, not covered by warranty, and not including shiping there and back, and time gone. Just a word to the wise.

[d3vil]

just ordered this:
http://www.ebcases.com/Detail.bok?no=3302&searchpath=d89e6f5510263adf8ed4f&category=Qtek+9090

Will post comments when it arrives

[given]

I just got my innopocekt case today, and I'm worried that the phone will fall out while I'm riding my motorcycle. Has anyone tried that combo? I'm not feeling very brave with an uninsured $625 phone. Also the one I got was not drilled for the mic. Did you guys who have it buy through innopocket, or through another vendor? I was going to email innopocket direct, to see if I could get a freebie.

[kcchen]

Great suggestion for cases, just wanted to add another to the mix.
http://www.senacases.com/cart/home.php?cat=339

I've been very happy with the Sena case for my HP2200. Very nice leather, and but the main selling point was the ability to slip it into the cradle without removing from case. The SX66 version looks very similar, but is not available for pre-order until April though.

In the meantime, I'll probably try the Krussel flip case. Since I'm almost certain I'll be carrying the device in my pant pocket. The Krussel looks the least bulkiest of the bunch mentioned here. I'm curious to see how secure the SX66 will be held in the case through the plastic clasps... I also like the fact that the keyboard will remain usable.

Thanks again for all the suggestions.
Ken

[3waygeek]

The Krusell is a nice case -- I bought one for $22 off eBay a few weeks back. It holds my SX66 quite nicely; in fact, it works a bit too well in that it's a bit tough to slide the display up to use the keyboard.

[kcchen]

Just got the Krusell today. I didn't realize the Krusell used clear plastic over the keyboard... It looks as though the extended battery may not fit in this case.

The case is very form fitting to the SX66. It's a little tight to secure the flap clasp, but I suspect the leather will stretch a little with use.

[johnyluo]

this one I think is the best.
http://shop.brando.com.hk/bwxdaIIsleatherhardcase.php

http://shop.brando.com.hk/image/bwxdaIIsleatherhardcase1.gif

http://shop.brando.com.hk/image/bwxdaIIsleatherhardcase4.jpg

[Fourgig]

this one I think is the best.
http://shop.brando.com.hk/bwxdaIIsleatherhardcase.php

I plan to buy this one. It's the only leather case I've found that has an opening for the speaker.

[johnyluo]

I bought Brando leather hard case yesterday,will take about 10 days to arrive.

[rajeshr]

I'd like to see a case like this one:

http://www1.vajacases.com/images/smartphones/siemens/xda2_mda2/aht032i/grande.jpg

Most of the time, I don't need to open the keyboard for use. I really need a case that will allow me to answer the phone quickly (i.e. I'm not really fond of pulling it out of a pouch-style case) or allow me access to PDA functionality easily.

Regards,
Rajesh

[gavinfabl]

I use the Brando Hard case, its the best in use. The belt clip does come undone occassionally if you sit down (probably my big waist squashing it).

I have reviewed and tried most cases for the XDA IIs.

The only other type of case design that is very good is the www.proporta.com alu leather flip case. The keyboard is protected. The proporta also has the alu protection.

[Riceburner]

I've ordered one of these :

http://www.proporta.com/F02/PPF02P05.php?t_id=1070&t_mode=des

but it's on at least a 1 month back order (I think they're still being produced) - will report on it if it ever turns up. I like the colour as much as anything else - prefer the darker tone to the silver of the M2K.

Using an Aquapac in the meantime which is very handy. :)

[pointything]

Thanks Riceburner,

I just ordered that nice looking Proporta case too. I hadn't spotted that one.

Cheers

Pointything

[forumjunky]

Thank you guys, I read the post here few weeks ago and ended up ordering a Piel Frama case for my IIs from pdahut, http://www.pdahut.com/store/home.php?cat=378. Although a little pricy, the case is absolutely beautiful. Well worth the pennies and highly reccomended. I was debating on getting the PDAir one but deceided to spend some extra money.

[boogiecornejo]

i bought the brando hard leather case and i have to say that it is not only exceptionally functional but really beautiful as well ! i think the hole for the earpiece is ingenius. i can use the phone even without opening the case to answer calls.the hard plastic really protects the device.all important buttons are accessible even with the case closed via strategically positioned holes in the case.

there are several things that could be improved in its design though and these are:1. i wish they put a slot for extra mmc or sd cards on the flip or 2- i wish that the flip was partially transparent so that you could read messages without having to open the case. 3. its a little difficult to take out the pda once its in the case and this is a hassle coz when its time to sync with your pc, it is necessary to take it out since it wont fit into the cradle when its in the case. aside from these 3 things i believe that the brando case wonderful!

[dilipc]

I found a site where Krusell cases are cheaper than, for instance, the Imate shop. See here: http://www.sfplanet.com/index.cfm/fa/items.main/parentcat/12398/subcatid/28012/id/139304
I've ordered mine, should be here next week.

[Mr_Gadget]

Guys I had the Innopocket Metal Case first but didn't like the fact that I couldn't use it like a wallet too. So now I've got a Krusell Multidapt Leather Case (http://www.mrgadget.com.au/catalog/product_info.php/cPath/62_83/products_id/649) and I lurve it!

On the other hand I'm also keen to try out the new Innopocket Magnesium Metal Case (http://www.innopocket.com/web/showProductDetail.asp?ID=140&name=Magnum%20Case%20for%20O2%20XDA%20IIs&code=OK-3110)...have you guys seen this?!

[xda2jojo]

http://i4.photobucket.com/albums/y127/xda2jojo/Silicon.gif
I bought this from www.pdaden.com

http://i4.photobucket.com/albums/y127/xda2jojo/AluminumCase.gif
InnoPocket-Phils local distributor

http://i4.photobucket.com/albums/y127/xda2jojo/PlasticHardCase.gif
Also from www.pdaden.com

[Mr_Gadget]

Thanks XDA2JoJo, but this thread is about O2 XDA IIs/PDA2K/Blue Angel cases... :)

[ccrrazzzy]

http://www.pdaskins.com/products/pda_pro.html small
http://www.pdaskins.com/products/pda_plus.html big

With the big one, you can even carry a BT keyboard or the Frog Pad or the new BT laser full size keyboard from i-tech http://www.itechdynamic.com/html/border25.htm or a tool kit or mini DVD and CD, etc.
If you get one of their's, you can clip it to your car visor too so you can follow GPS instructions or do other things while you are driving.

With the big or small one, you do not have to worry about looking for your keys, wallet, and cell phone.. It is all in one and it can clip to your belt or just your pants or shorts.
With a BT headset that has Caller ID on it, you only need to bring the XDA II out of the case to do other things.

I am able to carry, 1 mini DVD, BT GPS, I-tech laser keyboard, 1 mini CD, 1 tool kit with built in flashlight, 2 batteries, about 10 cards and a few business cards, cash and my XDAII and I put my wrap around part of my BT headset in the front pocket when it is not on my ear. (the DVD and CD are in the same case)

[Mr_Gadget]

Crazy, that's a cool case! But a bit too bulgy for me...:)

[SL]

Only reason why I would not buy from www.proporta.com again is because I got stiff by customs. Both shipments (one for two stylus pen and anopther for 2 plastic protector) I received I had to pay through my nose because they neglected to put Canadian $ on the invoice. I end up paying duties based on Sterling pounds because they were shipped from UK. To them it may be minor details, but when it comes to customs, it is money....2.4 times the duties had they put the correct currency!!!!!

[Mr_Gadget]

Eeek! and all for just a stylus and case! :)

Sorry to hear about that.

[wamatt]

What you guys reckon, Book or Flip cover? Which is better?

I was looking at this Proporta but looks pretty bulky. http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des

[mcq3000]

does the krussel have cutouts for the speaker? If I have the in my palm in the case can I talk handsfree? And if its closed in my pocket and it rings thru the built in speaker will I hear it as this is very important for me. Also does the Sena case have this feature?>

[Fourgig]

does the krussel have cutouts for the speaker? If I have the in my palm in the case can I talk handsfree? And if its closed in my pocket and it rings thru the built in speaker will I hear it as this is very important for me. Also does the Sena case have this feature?>

The only cases I've seen that have a cutout for the speaker are the aluminum cases and the Brando case. I went with the Brando.

[leddmirage]

hi guys/gals,
I've a question that has been bugging me for a long time and i could not find the answer..
i bought this
http://www.palmwarelabs.com/Products/ProdDetail.aspx?ID=362
recently. it uses magnetic lock/strap (i dunno what's the correct term) but it keeps the book-case cover closed :P so when i close the cover, the magnet is directly on top of my PPC screen.
my question: is this magnet going to affect my xda2s display in the long run like the effects of magnets has on regular PC monitor?? If it is then i think i would want to change this case to something better :D

[Riceburner]

On the other hand I'm also keen to try out the new Innopocket Magnesium Metal Case (http://www.innopocket.com/web/showProductDetail.asp?ID=140&name=Magnum%20Case%20for%20O2%20XDA%20IIs&code=OK-3110)...have you guys seen this?!


oooh - like the look of that one - if the Proporta one never appears I may well be tempted. :D

[mahadewa]

Ok, after a few weeks of 'refurbishing' their website, they are now up and running. So I put my order with them and get my case in 3 days !
So far no complain yet, I'm very pleased with it. The only problem is now I need a USB Synch cable, so I don't have to take the XDA out of its case :)[/img]

[janeway]

Hi Guys

Just to add another one to your list to consider - slightly similar to one of the earlier ones - it's leather and looks like the PDA is clipped in - available in either bifold or flip top versions - $17.95

http://pdaden.com/shop/cart.php?target=product&action=view&product_id=16916&category_id=289

I've just ordered one and the postage to the UK was only USD$7.00 making a grand total of £13.44 delivered - and they use PayPal as well which is useful for me.

I'll let you know when it arrives the quality etc.

Janie

[d3vil]

More than 2 months over and my case still hasnt arrived (never will i think). EBCases customer support is ZERO. What a rip off..Do yourself a favour and think twice before ordering from them :evil:

[robboy]

Hi Guys

Just to add another one to your list to consider - slightly similar to one of the earlier ones - it's leather and looks like the PDA is clipped in - available in either bifold or flip top versions - $17.95

http://pdaden.com/shop/cart.php?target=product&action=view&product_id=16916&category_id=289

I've just ordered one and the postage to the UK was only USD$7.00 making a grand total of £13.44 delivered - and they use PayPal as well which is useful for me.

I'll let you know when it arrives the quality etc.

Janie


looks good i might get one. but worried about where the credit cards are meant to go surely they are going to scratch the screen?

[janeway]

The new case arrived this morning - took under 5 working days to reach me from Hong Kong!

Leather quality is good, as is the clip design to hold it in. The case is slightly padded without being too "chunky". There's a rubber plug on the back of the case so you can use the camera function without taking your PDA out. The magnetic clip has no metal on the outside of either end - ie the metal is under the leather. Robboy, no need to panic re the credit cards - the top credit card slot doesn't interfere with the screen and the vertical pocket (which I put a card in just to let you see the location on the pic) has ample room for a few cards without them showing at all. The brand name on the case is Capdase - www.capdase.com

One slight problem - as has been noted on a previous case - they've forgotton to leave a microphone hole next to the reset hole in the bottom of the case :(

Overall I'm delighted with the case :D
I've written an email to Capdase re their design problem.

Janie

[HardRoc]

I just recieved the Innopocket Magnesium Case (http://www.innopocket.com/web/showSubCate.asp?scatid=10071&catid=9)in the mail today. Pretty sweet case all around: doesn't add much bulk or weight, might actually improve service though I have no quantitative way of testing that (although my service at home appears to be 3 bars instead of the usual 2), and above all else, its pretty stylish and attractive. Just my two cents.

[10-Dee-Q]

hi ,
i'mwondering, which one is better,
piel frama or senacases ??
did anyone have the comparison??
the features is about the same,
i just want to know about the fit,and the quality of leather and workmanhip, thx.

[Kemal]

I know a lot of people are not fond of the slip in/out style belt pouches akin to the one that comes with the pda2k, but I'm a fan and spent ages looking for a solid and nicely made replacement for the shoddy original.

I've discovered quite by accident that the HP Ipaq aftermarket leather case, model FA350A is a perfect fit. And they are expertly made.

I had an Ipaq h1930 before I bought my i-mate pda2k, and used basically the same case, but a smaller model, for ages without any wear on the device or case.

There are two variations on this case the older original model:

http://www.pcadvantage.com.au/browse/details.asp?ProdID=909711

And the newer premier model:

http://www.scorptec.com.au/index.php?prdid=00013951

I have looked at both cases in person and the only real differecnes are superficial. I like the look of the old case myself but the differences as I see it are:

1 - the front flap is shorter
2 - the new case has two sd card slots inside the case as opposed to outside the case under the flap on the old case (I think this is possibly done to get the memory cards away from the magnetic clasps? which are quite strong - only guessing)
3 - the new case has a glossier finish on the leather.

Personally I like the older case more, but the construction is the same, I felt the longer flap was more secure but I believe after using the newer case its only a perception the magnetic clasps are very tight, and there are two. Despite this they are designed in such a way as to be easy to open when needed.

The case is a nice snug fit and I see that as a good thing, I also have no problem taking my pda out quickly to answer calls and putting it safely back in.

The belt clip is sturdy and the part that goes into the back of the case runs the entire height of the case from top to bottom and has a secure metal stud through it which ensures your clip won't pull out but is also well protected with leather from damaging your pda.

Another difference between this case and the original that comes with your pda2k is that instead of leather bridges between the front and back the ipaq cases use quite wide elastic strips. helping to ensure that snug fit. The h1930 case I had was the same and has never stretched.

Hope this may help anyone who likes this style of case.

Oh and for those that feel its a bit oddball to have a HP logo on your pda2k or XDA IIs etc, well on the newer case its a metal inset which you could remove easily. Personally its more important to me to have a solid case than to have a matching logo.

Edit: Here's a good picture that shows the back with the belt clip you can even just make out the shiny stud below the clip which shows how far down the support of the clip truly goes.

http://www.aftermarketcellular.com/ic/358878-001.html

[efjay]

Does anyone have a recommendation for a vertical drop-in style case?

[KTamas]

Does anyone have a recommendation for a vertical drop-in style case?
Proporta Alu-leather Flip case

[efjay]

Does anyone have a recommendation for a vertical drop-in style case?
Proporta Alu-leather Flip case

are you talking about this case http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des ?

Im really looking for a case I can drop the phone into and will just have a flap at the top that fastens and completeley covers the phone. Not looking for a flip or bookstyle, thanks anyway

[Kemal]

I think you mean what they call a vertical holster (slide in case) as opposed to the horizontal holster (slide in case) I posted. There's quite a few of varying designs.

here's a krussel one.

http://www.extremepda.com/thestore/prods/KRUSVERTQTEK9090.html

I also see krussel has just released a horizontal holster akin to the ipaq one I mentioned earlier.

http://www.extremepda.com/page/XPDA/PROD/IMATEQTEKACC/KRUSHORZQTEK9090

Here's another vertical holster style

http://zxpro.com/catalog/product_16884_Leather_Holster_Case_for_O2_XDA_III_ IIs__iMate_PDA2K__Qtek_9090_cat_289.html

If you search for pda2k leather holster or similar on google or such you will find heaps, I came across a lot in my quest for a horizontal holster.

[efjay]

kemal thanks for the links, thats what i was looking for

[wamatt]

Great suggestion for cases, just wanted to add another to the mix.
http://www.senacases.com/cart/home.php?cat=339

I've been very happy with the Sena case for my HP2200. Very nice leather, and but the main selling point was the ability to slip it into the cradle without removing from case. The SX66 version looks very similar, but is not available for pre-order until April though.
Ken

Well the Sena for PDA2k is out http://www.senacases.com/cart/home.php?cat=336

Is anyone using it?

[wamatt]

does the krussel have cutouts for the speaker? If I have the in my palm in the case can I talk handsfree? And if its closed in my pocket and it rings thru the built in speaker will I hear it as this is very important for me. Also does the Sena case have this feature?>

The only cases I've seen that have a cutout for the speaker are the aluminum cases and the Brando case. I went with the Brando.

After extensive research I believe this is the best:

http://www.extremepda.com/page/XPDA/PROD/IMATEPDA2K/KRUSDYNAMICPDA2K

http://www.extremepda.com/Merchant2/graphics/00000001/krus_dynamicSXPPCLG.jpg

It has holes for speakers etc. Gonna order one now.

[goestoeleven]

While it's a little tough to close the magnetic snap, it really does "fit like a glove," and yes, you really can stick it in the cradle (although just barely).

It has a nice touch for connecting to the device: there is a clear plastic sleeve that fits over the keyboard when the device is open. You then "close the device over the sleeve, and in the process clamp the case on to the device. pretty clever!

[__Alex__]

I've found the Krusell Dynamic Multidapt SX6600 case on Amazon for $4 cheaper than extremepda. The only thing is, I've put in my order on 8/7 and my shipping status was recently updated to 9/2 to 9/13.

http://www.amazon.com/exec/obidos/tg/detail/-/B000A0C1YI/qid=1124854873/sr=1-5/ref=sr_1_5/103-7745784-7788601?v=glance&s=wireless

Wamatt, have you ordered this item from ExtremePDA yet? Do you have a shipping confirmation? If they have it in stock, forget the $4 savings, I'll buy from ExtremePDA now!

I've also noticed that quite a few places do not have this model in stock yet, including expansys (9/24)

http://www.expansys.com/product.asp?code=125077

I've had Krusell cases for my cell phone before, and I believe that the plastic front covering will be thin enough to do all PDA functions through it.

Here are some more pictures of this great case:

http://www.krusell.se/images/products/1943/1.jpg
http://www.krusell.se/images/products/1943/2.jpg
http://www.krusell.se/images/products/1943/3.jpg
http://www.krusell.se/images/products/1943/4.jpg
http://www.krusell.se/images/products/1943/5.jpg

[wamatt]

Yeah I ordered with them because they had a "Same day shipping " promise. They are in stock as well.

Should be getting it tommorow. The only thing with this case is I doubt it will fit in the cradle.. then again you can't have EVERYTHING ;p

[wamatt]

My bad, I mean ExecutivePDA not ExtremePDA.

http://www.executivepda.com/s.nl/c.ACCT114995/it.A/id.1570/.f

[Fourgig]

After extensive research I believe this is the best:

http://www.extremepda.com/page/XPDA/PROD/IMATEPDA2K/KRUSDYNAMICPDA2K

http://www.extremepda.com/Merchant2/graphics/00000001/krus_dynamicSXPPCLG.jpg

It has holes for speakers etc. Gonna order one now.

Nice find! This case does look very promising. Just about has all the features that I'm looking for!

In the photos, the sides of the case look awefully flimsy. Hope that's just because the photos are of a pre-production model that wasn't perfect.

There's also some weirdness on the back side. They have a cutout for the rubber insert on the left side but no cutout for the camera lens? Don't see the logic in that design. :?

[wamatt]

After extensive research I believe this is the best:

http://www.extremepda.com/page/XPDA/PROD/IMATEPDA2K/KRUSDYNAMICPDA2K

http://www.extremepda.com/Merchant2/graphics/00000001/krus_dynamicSXPPCLG.jpg

It has holes for speakers etc. Gonna order one now.

Nice find! This case does look very promising. Just about has all the features that I'm looking for!

In the photos, the sides of the case look awefully flimsy. Hope that's just because the photos are of a pre-production model that wasn't perfect.

There's also some weirdness on the back side. They have a cutout for the rubber insert on the left side but no cutout for the camera lens? Don't see the logic in that design. :?

Sometimes research is not enough :(. I don't really like my new Krussel case.

Pet pieves - its got this bulky "flap" thing on the back which covers the camera cutout and I see no purpose for it pretty lame.

Also it does not fit in the cradle, I had to cut some of the plastic holder which was too tight as it was pressing on call and hangup buttons.

I'm going to probably get the HTC Universal in soon so don't think I will bother with another case.

[fromamerica]

I just got the Krussell and I do not like it either. The plastic cover is so tight, that the down function on the center button is always pressed down. Whenever I get to a list on an app. I go immediately to the bottom of the list, not very good when trying to find a phone number. In looking at trying to cut a space out, it looks as if the plastic will become too flimsy and not hold the unit in place. I might give up and send this back. :cry:


Tim

[wamatt]

The plastic thing is lame. I cut the bottom half of it off. it still holds it tight but doesn push down on the call and answer buttons.

Also I find this case doesnt really fit well in general.

[mrbandwidth]

I'm interested in some magnesium case:

http://www.innopocket.com/web/showProductDetail.asp?ID=140&name=Magnum%20Case%20for%20O2%20XDA%20IIs&code=OK-3110


Does it have a hole for the phone micro? (in the screens is not clear)

Is reception affected by that kind of metal?

Is the close mechanism secure enough? Cannot the PDA slide down to the floor too easily?

And the most important, any opinions from a buyer?

Thanks,
Mr B

[Rick GM]

See this thread for my comments.
http://forum.xda-developers.com/viewtopic.php?t=23806&highlight=
Hope it helps.

[mrbandwidth]

Thanks a lot, RickGM!

Regards,
Mr B

[__Alex__]

I've finally received my Krusell case today (from ExecutivePDA) and I'm not having the same problems that the two of you are describing.

The way you're both describing things, it seems that the plastic piece on the bottom thats supposed to secure the unit over the keyboard only is what you're putting the entire unit into...

I agree that the case isn't a 100% perfect fit, but I have yet to find a case with an open face that I have full functionality on w/o opening the case (minus keyboard).

[leek]

I got a Krusell C3H case three weeks ago, and I like it.

It does not have the see-through screen cover (it's a leather flip-top with a removable clip -- available on eBay for about $20).

Because I have a huge 3500 mAh battery, it bulges in the back, but the case still fits pretty well. It is a little harder to snap, and a little easier for it to become unsnapped, but it's still alright.

I only have to take it off when I want to put the PDA into a cradle. I can plug the PDA into a USB sync/charger cable without removing it.

[MethodMan]

Hi, can anyone share their experiences with this case?

http://www.extremepda.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=INNOCASEIMATEPDA2K


The pictures aren't clear but I want to know if the keyboard can be used without taking the pda out of the case.
I know it's similar to the magnisium case but this one should have less issues with paint chipping.

[3waygeek]

Apparently so; check out the pictures (http://www.extremepda.com/imate_pda2k_metal_case.htm).

[MethodMan]

Apparently so; check out the pictures (http://www.extremepda.com/imate_pda2k_metal_case.htm).cool. Didn't see those pictures. I wish they would show more of the back so I can get a good look at the belt clip mechanism.

Anyone know if you can synch/charge this in the cradle without taking it out of the case?

[Divine_Madcat]

Hi, can anyone share their experiences with this case?

http://www.extremepda.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=INNOCASEIMATEPDA2K


The pictures aren't clear but I want to know if the keyboard can be used without taking the pda out of the case.
I know it's similar to the magnisium case but this one should have less issues with paint chipping.

I have that case, and it works fairly well. Being a student, it has sure taken a beating, but i dont mind- it means my SX66 has not. ;)

Anyway, as much as i like the case, i am looking to get a larger battery for the PDA, and it seems like this case will only work with the default battery. Does anybody have any idea what cases might fit the extended batteries, but still protect well?

[droy001]

Hey you guys I recently got an imate pda2k and I love it but the case I was given with it (piel frama cow leather case) while its a very nice case it really annoys me having to flip it open to answer a call.

That dynamic krussel case from the pictures alone looks like the best one imo but I just read bad things about it from you guys. Does it really not fit the device nicely? I really do not like that flap it has on the back, I plan to cut that out if i get this case. Has anyone done that or is it possible ? Also the plastic screen cover thing, does it push the buttons down or what? overall can I get some more feedback on this case? Also can you type or click on the screen through the plastic cover on or is it very hard/impossible?

If not this case is there any other case that will let me use my pda without having to open it. Ive used metal cases from innopocket before and I do feel they add bulk to it and Im not fond of having to open it either. So if i absolutely don't wanna do any opening and still have my pda protected is the krussle dynamic case my only option?

thank you

[Alan H]

I got this one from PDAmods and it doesn't cause any reception problems.
It does look a bit like the face of Dr Who's Cybermen though!

http://www.pdamods.com/proddetail.asp?prod=XDA%5FIIs%5FAluminium%5Fcase&cat=113

http://images.marketworks.com/hi/63/63398/dr_who_cookie_jars.jpg

If you're a Dr Who fan - or REALLY sad, it would be easy to make it look more like one I suppose! :roll:

[jmallen]

with a cutting wheel on a dremmel, a steady hand and patience I cut out a hole in the graphite case for the extended battery. It works perfect for me. also if the clear screen on the krussel case is to tight on the buttons, try using a blow dryer and heat that spot up then stretch it out a little. LOL

John

[J4n3000]

Andybody have http://www.expansys.com/product.asp?code=120551 this one and is http://pdaden.com/shop/catalog/product_16646_CrystalClear_Hard_Case_for_O2_XDA_II _cat_573.html this one hard plastic or soft.

[ms_guy99]

Has any one bought this case? Opinions??

http://shop.brando.com.hk/bwxdaIIsleatherhardcase.php

It seems pretty nice..... :?

[Fourgig]

IMO, the Brando hard case is the best one. Unfortunately, I broke the clip and I haven't been able to find a replacement.

[concep86]

Ok this is the one I got... I like this one because it covers the stylus... of which I have lost 3 already...

Got it on ebay for 9.99...elsewere $30-$35.

http://cgi.ebay.com/Krusell-Imate-PDA-2K-9090-SX66-PPC6601-Case-W-Swivel_W0QQitemZ9722395035QQcategoryZ48496QQssPage NameZWDVWQQrdZ1QQcmdZViewItem

My 2 cents

concep86