Bluetooth patch from club-imate! finally is here! AGAIN!!!!!

[saqibj]

As some of you may have found out i-mate launched its FINAL bluetooth patch yesterday only to withdraw it this morning.

Well this afternoon (my time GMT+3) they launched it again. Knowing that quite a few of you folks are NOT members of clubimate and would like to get the patch, I've downloaded them (as there are five flavors of them depending on your which ROM you are using; WWE, FRA, PTB, ITA and SPA)

Device Support - Bluetooth Patch # 2 for i-mate™ PDA2k


i-mate™ is aware of the problems being experienced with the i-mate™ PDA2k Bluetooth. This is the second patch which will improve the bonding between the i-mate™ PDA2k and other devices. With this patch the bonding between the i-mate™ PDA2k and Bluetooth headsets will be more robust, after the PDA2k has entered Power Save (Sleep) Mode. Customers have previously observed that:

- when the i-mate™ PDA2k enters Sleep Mode for a period of time, any in-coming voice call alert is not relayed via the Bluetooth link to the Bluetooth headset, so no audible alert is heard.

- when the i-mate™ PDA2k is bonded to a Bluetooth headset and has entered Sleep Mode, the device will periodically wake-up while in an idle state, without prompting by the customer, leading to unnecessary power drain of the battery.

The patch does not correct the beaming problem between devices using the Brodcomm Bluetooth stack, like the i-mate™ PDA2k, and devices using the Microsoft Bluetooth stack. We are still working on a resolution to this issue. Some Jabra BT250 headsets will also still have audio quality issues and we recommend contacting Jabra for a solution.

The correct patch to install on your device can be determined by tapping Start > Settings > System > Device Information and checking the ROM version suffix, eg x.yy.zzz WWE.

Click here (http://www.dsignsolutions.com/i-mate/OEM_WWE_122_008.sa.CAB) to select the patch appropriate for English devices and Arabic devices and download "OEM_WWE_122_008.sa.CAB" this file is approximately 3.8 Mb in size. Once the cab file installs please soft reset the device to complete the installation.

Click here (http://www.dsignsolutions.com/i-mate/OEM_ITA_122_011.sa.CAB) to select the patch appropriate for the ITA language on your device and download "OEM_ITA_122_011.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.

Click here (http://www.dsignsolutions.com/i-mate/OEM_PTB_122_014.sa.CAB) to select the patch appropriate for the PTB language on your device and download "OEM_PTB_122_014.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.

Click here (http://www.dsignsolutions.com/i-mate/OEM_SPA_122_012.sa.CAB) to select the patch appropriate for the ESN language on your device and download "OEM_SPA_122_012.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.

Click here (http://www.dsignsolutions.com/i-mate/OEM_FRA_122_009.sa.CAB) to select the patch appropriate for the FRE language on your device and download "OEM_FRA_122_009.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Please click on the Click here in the quote above to get the files as per your needs. No fear they are hosted on my server and you don't have to be a member of clubimate to get them.

[gigino]

hey
downloaded the lastest version of the bluetooth patch from i-mate guess what.
The first update they did they upgraded the stac from build 2500 to buid 3500.
Now with the new version they have gone back to version build 3000.
Now he is the problem bluetooth driver still insufficient drivers with both of the stacks.
With stack 3500 when I connect to my Parrot 3300 bluetooth in the car it works fine I even get the network signal saying ok.
Now when I upgraded to the new vesrion which is build 3000 when I connect to the Parrot bluetooth car kit the network signal is not shown anymore so what the hell is I-mate do can they just release the new version or not.
My brother has a Qtek 9090 his upgraded to the new rom he get the license has expired on the Italian version what a joke.
Hows fault is this CD or Broadcom the makers of the bluetooth drivers.
I would like to known so I can pester the right people.
Thanks
Gigino

[Anonymous]

Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up

[sacaman]

i can put this in XDA2 or qtek 2020 :oops:

[raiderz]

So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!

[saqibj]

i can put this in XDA2 or qtek 2020 :oops:
I don't belive so, it is for the PDA2K/XDAIIs/MDAIII/Qtek 9090
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
If its working don't change it, I perfer the 3500 rather than the 3000 'cuse it works better with my Jabra 100

[A320]

Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up

Just after the setup, I had exactly the issues on my QTEK9090. Go in the parameters -> Today and change the theme. After this, you shouldn't have any more screen problem. After a short test, it seems the Bluetooth problems with my Jabra 200 fixed! Good luck

[Anonymous]

Thanks, A320!

[rawveg]

Just installed the Bluetooth patch on my MDA III and was presented with a completely black screen after Soft Reset. The only way around this was to Hard Reset. Yet to test the performance of the patch, but thought I would pass on the warning.

[xda-rocks]

Had same problem on MDAII (black screen after reset - hard reset to cure) so am using previous patch

[Anonymous]

hi all

please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me

[zgan]

but where they on clubimate :?:
there only last ROM. Has not understood humour. :shock:

[Bebbo]

Could someone upload these patches to our xda-developers ftp server under the blueangel directory. There should be a bluetooth patches directory somewhere there......

Thanks

[hdbueller]

All you should need to do is remove it from the cradle,then put it back in the cradle and restart the upgrade again. It should start to run again.
If that doesn't work,there are a couple of other things you can try.


hi all

please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me

[a771la]

i can't download OEM_ITA_122_011.sa.CAB :(

where i can find it?

10x

[usamahahmad]

links are dead. Please PLEASE re-upload!! :(

[japunlock]

cannot download WWE version

[joseph.sapri]

Can somebody confirm that it works for XDA IIs please? cheers

[Tuatara]

Resurrecting DEAD threads from December 2004 will only serve to confuse the unwary! If you NEED this patch, go to the iMate website, register your phone and download it. *sigh* FYI: The patch has been incorporated into the WM2003 ROMs released since.

[saints5354]

Tuatara ,

Is this patch incoorperated in Helmi WM5 Rom ? If not, any effect if i install this patch into BA Helmi WM5 ?

Thanks!