View Full Version : Faxes on Qtek S100
mamac
8th March 2005, 11:25 AM
Hi, I wonder if it is possible to get faxes on Qtek S100? I have a multi numbering operator's SIM card (data, fax, voice).
How can I do that?
Thanks :)
Koksie
8th March 2005, 12:06 PM
Try KSE Truefax ( I think it can be found on the forum) for sending and receiving faxes.
CEBEP
10th May 2005, 11:24 AM
guys, I found this on the developer's website:
NOTE
Please notice that KSE Truefax is NOT running on Pocket PC Phone Edition devices with integrated modem, like XDA I + II, MDA I + II, Qtek, i-mate, etc.
anyone could manage it to work on Macician?
some0NE
16th May 2005, 05:41 PM
guys, I found this on the developer's website:
NOTE
Please notice that KSE Truefax is NOT running on Pocket PC Phone Edition devices with integrated modem, like XDA I + II, MDA I + II, Qtek, i-mate, etc.
anyone could manage it to work on Macician?
try this one:
http://pocketgear.com/software_detail.asp?id=15845
CEBEP
17th May 2005, 10:27 AM
yep, this one works. thank you
jfran
17th May 2005, 10:33 AM
with trufax, you need advance warning that a fax is expected then put the device in receiving mode, otherwise it wont work
rgds
jim
some0NE
17th May 2005, 09:08 PM
Hi, I wonder if it is possible to get faxes on Qtek S100? I have a multi numbering operator's SIM card (data, fax, voice).
How can I do that?
Thanks :)
I've just flashed my Magician to JAM_WWE_11100_132_11100 and... guess what... KSE TrueFax is already there!!!
CEBEP
18th May 2005, 05:25 PM
yep, there it is
it also includes the Midlet manager to lounch Java aplications, Photo Contacts and Intellidialer
jaysandkays
31st May 2005, 08:36 PM
Did any of you get TrueFax to work?
Have you successfully sent faxes?
Thx.
CEBEP
1st June 2005, 10:53 AM
yes, I did sent and received faxes
jaysandkays
2nd June 2005, 07:34 AM
Thanks for the feedback.
By the way, can you tell me what maker and version of firmware you are using?
I am trying to use TrueFax with my Imate Jam and am having problems.
TMobile won't help me unless I pay $10 extra per month for a second line to receive faxes on. My complaint to them is that I only want to send and not receive and so I question if my account is enabled for fax data. Of course their techs don't know and only give me the canned response of that I need to buy a second line.
So my next question to you would be inquire whether you had to subscribe to any special additional services in order to send faxes with your service provider?
If there is a situation where it is the IMate Jam ROM that doesn't properly support TrueFax, then I would like to determine that first before signing up to and getting stuck with a contract for an extra $10/month.
Thanks again.
CEBEP
2nd June 2005, 07:44 AM
yes, you certainly have to subscribe for the second line (fax/data line) even only to receive the faxes. Truefax will "listen" only your fax line not the current. once you activate send/receive mode on the truefax, it disables your voice line (can not make/receive calls) and listens to your fax line.
it is not possible to use the truefax over your voice line. furthermore, your operator will not allow you the fax transmission over the voice line even if you will somehow manage to use it for faxes.
karakemal
2nd September 2005, 10:49 AM
when i get in receive and try to send a fax from my pc or some fax device my imate-jam answers the fax call but repoerted and error and hang. :shock:
the error is as follows:
Modem has reported an error. :evil:
Querying modem...
Initializing modem with "AT E0 V1 Q0 M0 S7=60 S10=10 +CLIP=0; +CRC=0; +CMEE=0; +COLP=0; +CBST=7,0,0"...
Waiting for incoming call...
and then nothing happens.
what may be the problem. is there anyone with tghe similar problem. :?:
R 1.13.00
G 1337.43
D 1.12.00 WWE
imate JAM
Kemal KARA
karakemal
2nd September 2005, 10:49 AM
when i get in receive and try to send a fax from my pc or some fax device my imate-jam answers the fax call but repoerted and error and hang. :shock:
the error is as follows:
Modem has reported an error. :evil:
Querying modem...
Initializing modem with "AT E0 V1 Q0 M0 S7=60 S10=10 +CLIP=0; +CRC=0; +CMEE=0; +COLP=0; +CBST=7,0,0"...
Waiting for incoming call...
and then nothing happens.
what may be the problem. is there anyone with the similar problem. :?:
R 1.13.00
G 1337.43
D 1.12.00 WWE
imate JAM
Kemal KARA
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.