Speedn
6th April 2005, 01:51 PM
Hi folks,
i purchased a new usb cable today. its retractable, called 'Sync "N" Charge'. it is essentially the same connections as the stock usb connection cable.
the problem is when i try to connect my (Imate Jam) to my PC(winXPpro) it either freezes my pc, or puts up this msg.
USB device not recognised, one of the usb devices has malfunctioned, click here(opens up systems properties).
It does charge the Jam. well atleast the orange charge indicator lights up(i havent checked for actual charge).
The device drivers for my Jam are fine seeing as it still works when i connect with my original cable.
my original cable works fine, even if i switch straight back to it after trying to connect with the new cable.
I think the cable may be wired incorrectly eg postive and neg prolly fine but the data pins are screwie some how, sound like a reasonable guess?
Is there something else that im not thinking of/dont know about that could be causing the problem?.
bleh just typed all that and answered my own question. the data pins in the new plug are a little bit shorter than the power plug. I use a silicone case on my Jam which stops the plug from pushing in all the way by like 0.25mm. took off the case and bingo problem fixed.
I hate when that happens.
Ok well i might as well say that its a nifty little piece of hardware now that i got it working.
Which leads me another question, the reason i got this new cable was to be able to leave it in my bag and pull it out when i wanted to use my Jam like a 1gb usb card(1gb sd card). the times when i wanted to do this would be at university.
is there a way to make a pc recognise the jam like a usb drive instead of a pocketpc upon connection? i wont beable to install activesync on university pc's.
Thanks
Speedn
i purchased a new usb cable today. its retractable, called 'Sync "N" Charge'. it is essentially the same connections as the stock usb connection cable.
the problem is when i try to connect my (Imate Jam) to my PC(winXPpro) it either freezes my pc, or puts up this msg.
USB device not recognised, one of the usb devices has malfunctioned, click here(opens up systems properties).
It does charge the Jam. well atleast the orange charge indicator lights up(i havent checked for actual charge).
The device drivers for my Jam are fine seeing as it still works when i connect with my original cable.
my original cable works fine, even if i switch straight back to it after trying to connect with the new cable.
I think the cable may be wired incorrectly eg postive and neg prolly fine but the data pins are screwie some how, sound like a reasonable guess?
Is there something else that im not thinking of/dont know about that could be causing the problem?.
bleh just typed all that and answered my own question. the data pins in the new plug are a little bit shorter than the power plug. I use a silicone case on my Jam which stops the plug from pushing in all the way by like 0.25mm. took off the case and bingo problem fixed.
I hate when that happens.
Ok well i might as well say that its a nifty little piece of hardware now that i got it working.
Which leads me another question, the reason i got this new cable was to be able to leave it in my bag and pull it out when i wanted to use my Jam like a 1gb usb card(1gb sd card). the times when i wanted to do this would be at university.
is there a way to make a pc recognise the jam like a usb drive instead of a pocketpc upon connection? i wont beable to install activesync on university pc's.
Thanks
Speedn