WM2003SE - Coming soon... ;-)

[LumpiStefan]

Hello Wallaby-Users.....

New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....

More Infos coming soon here in ths thread.

See some screenshots:

[KTamas]

WOOOOHOOOOO!!!!!!!! WEEEE!!!!! YOU ARE OUR MAN!!!! :) :oops:

[KTamas]

Hello Wallaby-Users.....

New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....

More Infos coming soon here in ths thread.

See some screenshots:
Btw if you need a PW10A1 tester, you can mail me/find me on msn: ktamas@hardwareoc.hu

[LumpiStefan]

Ok. Now it´s done .....

Rom is available.

Until now there are a few linitations with this ROM:

1.) Bootimage are not adjustable. Needs more investigations
2.) Flashing is only via EXE-File possible, because this ROMs are little bit bigger than the normal an xdatools checks the filesize.....
3.) Part of ROm that was reserved for backup is used in this ROM, so those data will be destroyed while flashing.....

ROM is available without any additional Programs (Download the Attachement) and also already included in the kitchen (http://lumpistefan.dyndns.org/).

I cannot gurantee, that all is working fine. So flashing is on your own risc....

Also it would be great if some nice guys donate for the xda-developers or for me. Link ares available here and on my kitchen....

If you have any problems, please use this thread, PM to me or Email....

Have fun with the new ROM...

Stefan

[ramram]

LumpiStefan Gr8 Work :D

In the rom kitchen it's available with additional file size after adding some softs it's 16.1 , is it safe to flash it?

[KTamas]

You are our man once again! :) cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU! :D

[KTamas]

Does it still have the SD-erase bug?

[ramram]

You are our man once again! :) cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU! :D

Is it fast, working normaly, buggy?! tell me I'm excited heheh

[KTamas]

You are our man once again! :) cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU! :D

Is it fast, working normaly, buggy?! tell me I'm excited heheh
It is faster than WM2003 :)

[theholysaint]

when will it be revealed in german?

[tomaszeg]

It's working good and it's faster- movies works faster.
I hope that SD card erase bug is fixed.

[ramram]

I tested it, so far working and fast. I'm just waiting the Sd-Erasure bugg... I hope it wont happen....

[LumpiStefan]

when will it be revealed in german?

I think never. :-(

Stefan

[LumpiStefan]

Does it still have the SD-erase bug?

Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....


Stefan

[KTamas]

Does it still have the SD-erase bug?

Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....


Stefan
I think it does not (i repeat, i THINK). The sd-erase bug was a bug in Windows CE 4.2 (WM2003 based on that), and there were a patch that correct that bug (if you have the WCE4.2 source of course :) ), so WM2003SE should be patched.

[kamiar]

Hi Stefan,

i am geting GetDeviseData error, any idea? btw thanks for great work

[LumpiStefan]

i am geting GetDeviseData error, any idea? btw thanks for great work

There are 2 possibilities:

1.) Wrong device. This only works with Wallaby devices (XDA I / MDA I / ... )
2.) You have rom that prohibits flashing via exe (e.g. 4.01.16) Than you have to downgrade first via SD-card (e.g. Special Edition ROM) and then upgrade to WM2003SE

HTH

Stefan

[ramram]

As I remember I flashed my device with this ROM long time ago, Lumpistefan you finnaly sort it out to let it work GOOD WORK!!!! :wink:

[rcco]

im trying to upgrade i dont have the patch yet sd eraser.

[kamiar]

Hi,

I had rom 4.01 and had to downgrade to 3.17 with SD to be able to upgrade to 2003SE, i did that but now it hangs at boot screen and the problem is that i dont have a card reader and even can not sync, how can i make another image on SD or any other solution?pls

Thanks

[theholysaint]

when will it be revealed in german?

I think never. :-(

Stefan

sehr motivierend....

why do you think that it'll never be released in german? is it so difficult to change the language?

[Sallala]

Thank you LumpiStefan!
Great work!
Unbelivable!

It works, and the install was problemfree.

Question:
- There is a program or reghack to assign the volumecontrol button?

[damosoft]

Does this ROM have any improvements on the poor signal problems of the 2003 roms ?

Just thought Id ask whilst I prepare the device for flashing :wink:

[ramram]

Does this ROM have any improvements on the poor signal problems of the 2003 roms ?

Just thought Id ask whilst I prepare the device for flashing :wink:

The poor signal on your ppc is from the radio version especially with 2003, well if it was a T313 version you wont experiment the poor signal strength.

I dont advise you to downgrade otherwise you'll get GSM ERROR which transforms ur PPC into a brick :(

[damosoft]

I did have a older version of 2003 on my XDA 1, but the signal problems was causing me too many hassles, which is why I downgraded to 2002 again (without any problems) (and several times I might add :wink: )

[pvenkat]

Thanks for providing WM2003 SE. .All of a sudden, my age old SX56 looks like a brand new device again...I really appreciate your hard work.

Thanks,
Venkat

[tomaszeg]

Thank you LumpiStefan!
Great work!
Unbelivable!

It works, and the install was problemfree.

Question:
- There is a program or reghack to assign the volumecontrol button?

I have the same problem with volumecontrol button.
How to fix it?

I heve this rom for one day and it works really good. I only had problem once- with volume control, it display strange things, in settings nottification too. Hard reset helps. Now works good, SD card works good for now.

[KTamas]

I had something kinda scary this morning...I woke up and i saw that my XDA is searching for network. Because usually it can't find it easily (signal strength is horrible in our house), i usually turn on flight mode then off. So i tried to turn on flight mode - and nothing. I did a soft reset...then my XDA's backlight started to "blink" and it looked like it can't recognize the GSM ROM (This was in the bottom right corner:
G
U
3.04

)
Anyway, I soft-reseted again, and everything works ok...well...this was strange.

[Fredde87]

Hi

Thx for the great work on this :D We all appreciate it..

Is someone else experiencing problems with turning the phone function back on after having it off (flight mode)? For me nothing happens when I try to turn it on, there is only two solutions then, soft reset or plugging in the power to it... Then it all of a sudden works to switch it on....


Running radio version 4.17, should I try to downgrade to someother version? Any specific one?

ohh yeah and my xda switched to version PW10B1 now instead of A, but that isnt important since this can be switched with a tool cant it?



Thx

[danny_ws2000]

:lol: :lol: hi guys i'm newbie here...i use XDA 1 and my wireless modem can connect as a modem only by Irda and SERIAL, anyone can help me how to upgrade my wireless modem so it can be an USB Craddle GPRS MODEM ??

or how to make my xda 1 as a gprs modem via it's craddle??? thankss all :P :P

[JGUI]

OK,

I updated yesterday, I thought it run fine... well

this morning my battery was empty, phone network was turned off,
but I left it for all nite with battery charger connected.

when I taken XDA from the table it was calm on the backside so I thought it was charged fully. but the battery was empty - I mean: less than 20%, it allows me to wakeup XDA but only for seconds.

I see I have two power icons in the settings dialog.
maybe this is a problem? how to delete one of them? the older is not running - tapping does nothing, the new one opens new settings dialogs
and there the network connection was unchecked ad did not allow me check back with empty battery

when I connected the charger again, the phone network started to work back.

[Fredde87]

JGUI, I have the same problem with network being dropped and only coming back with charger... Though I dont have the problem with battery, but I also have two power settings, both work....

Also mine is a bit slow sometimse but this is probebly to be expected running 2003se on a xda....


Is everyone experiencing these problems or are they unique to us?

[JGUI]

I thought many times, I should back to to PPC2002 original XDA version.

Why? Just because this is the only version compiled before 11 September, and somehow I'm not sure what's inside every O/S after this date. Maybe this is obsession of mine only?

But this is a point why I still keep old XDA too.
Specially because I can write the program which will send SMS or Emails invisible to owner of XDA.

The only problem: in PPC2002 were poor GPRS and GSM bands.


any way.

can someone explain why and what's done with Watson Settings inside WM2003SE?

[Fredde87]

JGUI, I solved the problem.... Just for the sake of it I installed wm2003se without any additional apps or tweaks... And it works flawless, must be something we have added... Can you post a list of what components your rom has?

[JGUI]

sure,

I make own version yesterday,
I selected a few additionals, but not all I see after update,
some of them are visible as shortcuts but do not work.

here is the list:
spb gprs monitor
spb plus (older) - does not work correctly, close button is inactive in some case
cab install
notem
mms composer - does not work at all, even does not lunch (but the exe exists)

these icons are visible,
I'm not sure if I selected something more or not,
but I cannot find anything more, I remember I cleared all themes and boot images


so, should I use the clear version directly from this thread?

[Fredde87]

Sorry I am going to have to redraw my statement... It started messing up again, it seems to work flawless just after upgrade, then after leaving it for a while the problems reaccured :/

Could this have something to do with either the radio version or the mhz of the frequency (mine got changed under 2003se)....

[danny_ws2000]

somebody...anyone...please help me at http://forum.xda-developers.com/viewtopic.php?p=108972#108972 thanksss so muchhh :roll:

[Fredde87]

Doh, same problem under wm2003... I'll try a reinstall of the radio thing soon... Hows things working for you JGUI?

[JGUI]

well

after 2nd or 3rd soft-reset the baterry charging started. strange.

when battery is full, phone bandwith seems to work okey. no breaks, no finding.

spb plus still does not work in correct way. some times it works some time tappint the close button does nothing, both for program and for settings dialogs.

still don't know how delete one of power settings icon.

I spend today hours for testing how my applications are working with this version O/S in this old XDA hardware.

just a little problems with refreshing of today add-in items.

[KTamas]

well

after 2nd or 3rd soft-reset the baterry charging started. strange.

when battery is full, phone bandwith seems to work okey. no breaks, no finding.

spb plus still does not work in correct way. some times it works some time tappint the close button does nothing, both for program and for settings dialogs.

still don't know how delete one of power settings icon.

I spend today hours for testing how my applications are working with this version O/S in this old XDA hardware.

just a little problems with refreshing of today add-in items.
I had some strange issues with charging back to WM2003, although i ahve no probs under WM2003SE. To hide the power button: Go to HKLM\ControlPanel\Power, and create a new string named "Redirect" and with no value. This will hide the new power icon instead of the old one, though. For task managing: I suggest you WisBar Advance 1.x for free and Wisbar Advance2 for a pay solution.

Question: Will XDA Extended Battery work w/WM2003SE?

[JGUI]

more important problem is with GPRS connection.

I create new mode connection by GPRS, exactly the same way as in the previous version of O/S.

and now I cannot connect, get error: The answering modem has disconnected. To check....

I'm going to settings dialog, check all and nothing.

strange, because shortly after soft-reset I saw G icon on the top bar.

[KTamas]

more important problem is with GPRS connection.

I create new mode connection by GPRS, exactly the same way as in the previous version of O/S.

and now I cannot connect, get error: The answering modem has disconnected. To check....

I'm going to settings dialog, check all and nothing.

strange, because shortly after soft-reset I saw G icon on the top bar.
I had this problem too...then i turned off Wisbar Advance2, and soft reseted...then worked fine. It's a WA2 bug, as far as i know.

[JGUI]

no I have not wisbar installed

[Fredde87]

bummer, I have tried all version now, 2002, 2003, 2003se, none fixes the issues of only being able to switch on the phone mode with power present... I am trying different radio stacks now since they are the only thing incommon which hasnt changed during the different versions...

[dlinktm]

I hv hang promble when running spb plus n maxalarm together sometimes , after uninstall maxalarm n all run smoothly . only hv adujust volume button promble (no function when press). Tnis is 4th day i use it. This rom hv wireless modem? how to get it?

[interestingfellow]

so, you cannot cook anything into the rom? I know if you can then you can, period; but I really like the idea of IIWPO. Anyone?

TIA!


EDIT
After jumping the gun, and then looking a little further, I feel like an ass once again.

PLEASE IGNORE THIS/MY POST!

[JGUI]

all the above comments and problems point me,

that the current WM2003SE XDA version has problems with correctly allocation of memory for registry keys saving.

[interestingfellow]

I only have one extremely important question that is not clearly (not for this idiot) answered in this thread....

CAN YOU GO BACK TO 3.x.x or 4.x.x FROM WM2003SE?

AND

Can you use the SD Method and does the EXE method work?

TIA!

[LumpiStefan]

CAN YOU GO BACK TO 3.x.x or 4.x.x FROM WM2003SE?


Using sd-card for flashing new ROM 100% sure. Did it about 5/6 times.
Downgrading via exe? Not done until now, but reflashed with WM2003SE, so there isn't such a protection in it like it is in the most T-Mobile ROMs....


Can you use the SD Method and does the EXE method work?


Until now you can only flash WM2003SE via the Exe-File, cause the romimage is a littel bit bigger than the normal. (OSImagetool reports a filesize error).
Flashed my devices about 10 times with the exe file and everytime it worked for me...

HTH

Stefan

[cloupac]

Hi all,

I have tried to upgrade my xda I (32MB) to 2003se with the kitchen ROM. After cold booting, the device hung on the boot screen, meaning that the three lines appear in the lower right corner of the screen and then the system seems to come to a halt.

What's even more puzzling is that it seems impossible to re-flash to any 4.x series (2003) ROM. Fired up the boot loader and tried several of the 4.01.19 ROMs I cooked in Lumpistefan's kitchen and which used to work before, and they all show the symptoms mentioned above - plus an inverted boot screen (upside down and flipped from left to right).

I was able to revert the device to a 3.19.01 ROM without problems, though. But it seems i have lost my upgrade path to 2003.

Anyone else experiencing this odd behaviour?

Regards,
Andreas

[cloupac]

I just cooked a plain vanilla 4.01.19 T-Mobile GER ROM (no additional Software, no autoconfig data) in the kitchen and this time the boot screen is displayed correctly. But apart from that, still no luck in booting the OS...

[LumpiStefan]

Are you sure, that you're device is working properly?
Looks like the same problem, when the radio stack have gone.

If you just enter the bootloader, do you get the normal screen or do you get an gsm error?

Stefan

[cloupac]

Are you sure, that you're device is working properly?
Looks like the same problem, when the radio stack have gone.

If you just enter the bootloader, do you get the normal screen or do you get an gsm error?

Stefan

Hi Stefan,

no problems whatsoever concerning the Radio Stack, I'm afraid. The bootloader (v 5.14) says "GSM OK" and the diagnostics run fine...

Plus, the 3.19.01 ROM runs all right - wouldn't it refuse to boot as well if the Radio Stack was corrupt?

Regards
Andreas

[ljm2020]

Hi, Can I modify this rom by mkrom?I just find that I can't turn the rom file: NK.nbf to rom.nb1, by using OSImageTool, and so I just cannot continue:(
If can How can I do. Any tools I need?

[JGUI]

connecting usb cable from dektop pc
does not wake up XDA

means, I have to turn the power on manually,
then it will start to synchronize by Activesync

anybody observe?

[KTamas]

connecting usb cable from dektop pc
does not wake up XDA

means, I have to turn the power on manually,
then it will start to synchronize by Activesync

anybody observe?
Same here, not a big problem for me.

[LumpiStefan]

Hi, Can I modify this rom by mkrom?I just find that I can't turn the rom file: NK.nbf to rom.nb1, by using OSImageTool, and so I just cannot continue:(
If can How can I do. Any tools I need?

You should be able to extract it with this command:

perl splitrom.pl $inputrom -wo cfg/rom.nb1 -wx cfg/xipchain -oe 0x82000000

HTH

Stefan

[ljm2020]

Thanks for your help, I have got the rom.nb1.
But I just find another trouble:
When I run the code:
perl splitrom.pl cfg/rom.nb1 –wx cfg/xipchain

it gave me as follows,which is not like the WM2003 rom.
http://forum.xda-developers.com/files/1_374.jpg
Can I continue?

[LumpiStefan]

Thanks for your help, I have got the rom.nb1.
But I just find another trouble:
When I run the code:
perl splitrom.pl cfg/rom.nb1 –wx cfg/xipchain

it gave me as follows,which is not like the WM2003 rom.
http://forum.xda-developers.com/files/1_374.jpg
Can I continue?

Should be all ok.....

Stefan

[ljm2020]

When I am not so busy tonight, I will have a try. God bless me! :!:

[ljm2020]

There has some problem on the rom.nb1 which is got by run the command:
perl splitrom.pl $inputrom -wo cfg/rom.nb1 -wx cfg/xipchain -oe 0x82000000
when I run the follow command:
perl splitrom.pl cfg/rom.nb1 | perl calcgaps.pl 0xfff >calc.txt
just got the error information:"xip regions not found: 81f50000=EXAPPS"
and got an empty file named calc.txt, cannot got the addresses :(

so I try to got the rom.nb1 file direct from my PPC which has upgrade to the WM2003se you offered. Using OSImageTool.exe and successfully got that file.

so I copy the new rom.nb1 to \mkrom\cfg and run the command:
perl splitrom.pl cfg/rom.nb1 | perl calcgaps.pl 0xfff >calc.txt

this time I got a calc.txt which contain those addresses

but this time I run the command:
perl splitrom.pl cfg/rom.nb1 –wx cfg/xipchain
http://forum.xda-developers.com/files/1_710.jpg
It seems that there is something wrong with the xipchain file.

and then after i put the files i want to add to the rom, and run:
./mkrom.sh cfg/rom.nb1
he tell me:
did not find xip region
Error creating new rom

Failed :( :(

I think the key is the xipchain file, i just got one which is not suitble for this WM2003se rom.
How can i do.

[othafa]

Hi, bit of a newbie...been lurking :roll:

Anyway, I upgraded yesterday and so far so good. A few problems but I suspect that's because I've reinstalled some programs that are not compatible with 2003se.

However I do have the following issues.

No Volume control
Active sync seems to come on and run in the background
Contacts list sometimes wont appear and when it does it often freezes and I can't see how to get it on my today screen
Pocket Nav seems a bit buggy
and today screen sometimes freezes
However, I'll continue to fiddle.

On the plus side, internet connection seems much faster and more stable
I love the landscape view option.

Thanks Stefan for the hard work. Oh, I had previously upgraded to the XDA Rom version 3.17 something I think, I'm not sure why this upgrade has downgraded my Rom to 3.04.00, is this something I did wrong in the kitchen or does it have to be this version for 2003se to work and does it make a difference anyway?

[JGUI]

well, I had no problems with volume control, works all time,

but still I cannot set gprs connection, still get error "modem disconnected..."

and something very strange:
when I written user name in the default dialog well known,
the today screen's owner info disappear and lock some other items.


ha!

[ljm2020]

The problem is not in volume control, but in volume button(which is on the side of our Wallaby :) )
however i seldom use that button :P

[donpkong]

hi there!

looks like a wonderful ROM. my question is that the Model No. changes to PW10B1. Does that mean the GSM bands available will be like the US models (900MHz/1900Mhz) instead of Europe/Asia models 900MHz/1800MHz)?


thanks!

[KTamas]

hi there!

looks like a wonderful ROM. my question is that the Model No. changes to PW10B1. Does that mean the GSM bands available will be like the US models (900MHz/1900Mhz) instead of Europe/Asia models 900MHz/1800MHz)?


thanks!
Nope. You'll stay at 900/1800 MHz.

[ezzkht]

LumpiStefan you are a legend man 8)

i really want to donate for your kitchen, but i don't have a PayPal! my country (Jordan) is not trusted by PayPal :cry:

Anyway, thanks alot for posting this WM2003SE for XDA 1 :lol:

[irsan_donald]

is there any patch for WM2003SE ? so that my wallaby become stable..
1. my volume button didn't work.
2. the device became slower.
3. often hang so I have to soft reset it.
4. poor signal.
5. etc....

[KTamas]

is there any patch for WM2003SE ? so that my wallaby become stable..
1. my volume button didn't work.
2. the device became slower.
3. often hang so I have to soft reset it.
4. poor signal.
5. etc....
1. There is no solution indeed.
2. Well, for me, WM2003SE is faster than WM2003...
3. I had no stability issues so far, i have to softreset 1-2 times a day like back to ppc2002 or wm2003
4. signal is NOT related to OS. It is related to the radio stack.

[irsan_donald]

can I go back to my previous OS ? like WM2003 or PPC2002 from WM2003SE ?

[KTamas]

can I go back to my previous OS ? like WM2003 or PPC2002 from WM2003SE ?
Yes, with the SD-card method!

[irsan_donald]

may I just run the .EXE file instead of SD-card method ??

[LumpiStefan]

may I just run the .EXE file instead of SD-card method ??

Should work also...

Stefan

[billho]

Hi LumpiStefan,

I have updated with your ROM, but I have got an error ROM image not compatible. My SX56 is PW10B1/4.01 and your ROM is PW10A1/3.16. How can I fix it? Do we have any tool to change PW10B1 to PW10A1? Please give a link. Thanks

[ezzkht]

The Wallaby's version of WM2003SE is really weird!

- Volume button no longer works
- Some today plugins won't show at all after a soft reset
- Some programs (like Wisbar 2.x) hangs up

anyone knows how to fix the volume button & to run wisbar??

plzzz help :roll:

[djtao]

:cry: Why my XDA can't be upgread , intializtion CMD shows me , "error: getdevicedata - an existing connection was forcibly closed by the remote host . error getting devicedata." can anyone give me a direction...

[KTamas]

:cry: Why my XDA can't be upgread , intializtion CMD shows me , "error: getdevicedata - an existing connection was forcibly closed by the remote host . error getting devicedata." can anyone give me a direction...
You probably have a T-mobile WM2003 ROM. You have to downgrade to a PPC2002 ROM then you'll be able to update to W2003SE.

[KTamas]

aaaaaaaaarrrrrrggggggggghhhhhhhhhhhhhhhhhhhhhhh... .........



Today my SD-card got wiped out after a soft reset. WHY CAN'T MICROSOFT MAKE ONE WORKING OPERATING SYSTEM???

:(

[ezzkht]

This file could help..
Run it using Resco Explorer 2003 or enter the registry keys manually..

CHEEEEEEEEERS 8)

[KTamas]

This file could help..
Run it using Resco Explorer 2003 or enter the registry keys manually..

CHEEEEEEEEERS 8)
Can anyone confirm that this is really working?
Edit: I applied it, unlocked my SD-card, softreseted about 10 times, pulled in/put about 8 times and changed theme twice....no wipes so far...looks promising :)

[tsuyokikan]

I was recently given a T-Mobile HTC9500 (XDA1) by a friend who purchased a new Blackberry. I was able to unlock it, using XDA Special Edition ROM, to be used on Cingular. I have a few questions. 1) Should I upgrade to WM2003 or 2003SE? 2) If so which and where do I get it? 3) Can some one tell me how to set it up to connect to the internet from the phone? I am unclear on how to set it up to get the most out of my Cingular service.

Sincerely,

JDS

[KTamas]

1) Should I upgrade to WM2003 or 2003SE?
I recommend WM2003SE.
2) If so which and where do I get it?
http://lumpistefan.dyndns.org/

Honestly i don't know how to set up internet to cingular, sorry.

[auburnham]

connecting usb cable from dektop pc
does not wake up XDA

means, I have to turn the power on manually,
then it will start to synchronize by Activesync

anybody observe?

I've had wm2003se on my device for about 24 hours now, and this is the biggest problem I've found so far. It seems like there may be a fix in the registry for this. Anyone have any clues?

Would have liked to see PocketZenPhone in the kitchen, but that's a simple install that doesn't take up much space anyway. Overall, another class-act by Stefan. Where would this community be without the heavy hitters like him?

Any further clues on changing the boot screen?

[auburnham]

I had something kinda scary this morning...I woke up and i saw that my XDA is searching for network. Because usually it can't find it easily (signal strength is horrible in our house), i usually turn on flight mode then off. So i tried to turn on flight mode - and nothing. I did a soft reset...then my XDA's backlight started to "blink" and it looked like it can't recognize the GSM ROM (This was in the bottom right corner:
G
U
3.04

)
Anyway, I soft-reseted again, and everything works ok...well...this was strange.

This sort of thing happened to me on a weekly basis before I installed this upgrade. I also downgraded my radio stack from 6.25.02 to 6.24.20 because I think that was the root of the problem. What's worse, a hard reset was the only solution I could find. Needless to say, I unfortunately became very good at restoring my PDA from scratch in about 30 min.

[LumpiStefan]

Would have liked to see PocketZenPhone in the kitchen, but that's a simple install that doesn't take up much space anyway.

Removed it from the WM2003SE - Page, because it have some problems with the landscapemode and freezes the today.....
It is fixed in the actuel release, but not in the latest freeware version....

Regards

Stefan

[oozypal]

Dears,

I downloaded the original "wallaby__eng_original_se_rom.exe" and ran it. I got a weird crash. When I ran the programs, it says "Getting data from device...please wait for 10 seconds" then the window disappears or crash. It just disappears.

Device Information

ROM Ver: 3.16.13 ENG
ROM date: 01/09/03
Radio Ver: 3.19.01
Protocol ver: 32S54

[romoletto]

Hi,
i have upgrade my Qtek 1010 to WM2003 SE 3.04.00 ENG from Http://lumpistefan.dyndns.org/
it's all OK very well, my Qtek is live and good healt, but i have a problem, in settings menu i don't have the icon "GPRS Settings" so i can't choice "PAP or CHAP" Authentication Method, and i can't connect to my service provider. With older ROM PPC 2002 i can choice PAP and the connetion was OK.

Any suggestion ?
Can i modify the registry and solve the problem ?
Any have new ROM version with GRPS setting ?

P.S. sorry for my bad english

Alessio

[datas_brother]

Hi,

I Upgraded yesterday. In addition to the problem with the volume button, the following occurred:

After restoring (re-intalling) my old software the hardware buttons for the phone had no function. They didn't wake up the phone or start/stop the dailing process. I did a soft reset a couple of time but that didn't solve the problem. This morning the battery was low (normal). I performed a soft reset and during the boot process the battery warning appeared and threw the whole unit in chaos. None of the Today plug-ins appeared and the phone didn't recognize the SIM card. I plugged the power in and reset again. everything worked fine including the phone buttons (Vol still doesn't work). After charging I reset again without power and everything is still OK.

The reason the power was low is because I was listening to Some MP3s. The screen toggle function does not work correctly. The screen gets turned off for less than a second and then turned back on. Problem still exists after charging.

Anyone have similar problems?

Anyone know why the GPRS connection cannot be disconnected in the english versions of WM2003(SE) but can be in the German versions. Very annoying having to activate flight mode to disconnect!

datas_brother

[auburnham]

Ok. Now it´s done .....
1.) Bootimage are not adjustable. Needs more investigations


Stefan,
Is the bootsplash stored at a different location other than 81900000, or 81ec0000? Has anyone tried pnewbmp.exe with -3 and -4 options? I may give it a try later to see if I can get it to work. If it doesn't, does anyone know how to determine where the bootsplash is located? Can we dump a ROM image (or just look at the flash image) and look for something that would indicate the beginning of the bitmap?

Shawn

[KlickKluck]

Stefan you really did a great job with your kitchen!
I cooked several images and I loved to work with your comfortable web page!

For those who have problems like devices that do not wake up or stability issues: Leave some space free when cooking a 2003 SE image!
I suggest a minimum of 370 kB.

My problem: After turning the device off, I wasn't able to turn it on again. The phone wasn't even able to receive a phone call. Only a reset helped.
An other weird thing: the sub folders ("Misc", "Internet", "Phone",...) under "Windows\Start Menu\Programs\" were not created by the kitchen!

I think the reason was that I selected too much software - only 3 kB of 3700 kB were free!
I tried two other configurations: One with 370 kB and one with 486 kB of unused rom space. Both worked.

An other image was not stable with enough free space. There appeared some memory crash messages in the today screen.
In my opinion this was caused by the two tools BatMemTime und tdMeter that do not work correctly under 2003 SE.
Stefan: Probably remove these versions from the kitchen. They don't work with the screen rotation function.

Greetings to all the XDA junkies out there!
Michael

[ocena]

Hi all,
I have a serious problem after "installing" WM2003SE. XDA hangs-up on the boot screen. The versions in the bottom are:

G32S54
U4.21
3.04

Could you help me how to start SE on my device? If I downgrade to PPC2002 everything is OK. Maybe wrong radiostack? Which should I use ad where to get it?Thanks, very much.

[dev.null]

ok i bit the bullet and loaded an image i had downloaded before. some observations - second pass.

spefific issues:
-don't mess with pocketnav - leave it in pc2002 UI. this is what totally frustrated me before, didn't realize it worked the same way on WM2003.
-phonext - is a waste use mortring (Stefan it's freeware, maybe you can add?
-batmemtime - has the on and off again display problem, don't bother.
-tdclock - the bitmap font for the time didn't display right.

overall:
-still buggy, feels sort of like the win95 beta :( , but usable in like manner
-freezes and reboots common if you fiddle with settings a bit. must be memory management.

i'll see how long i can stand using it in this state. i might go back to wm2003 AWS gold version. didn't have the SD erase problem there anyway.

[dev.null]

i'm getting the sense that programs are not that compatible with wm2003se. misbehaving problesm can easily crash the system. i've whittled away at it , even found that the inbox today plugin was causing problems. seems to be stabilizing somewhat. if a lot of problems wind up being incompatible, i'll go back to wm2003 gold release...

[gordanM]

Hello Wallaby-Users.....

New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....

More Infos coming soon here in ths thread.

See some screenshots:

Hello!
Help Me.
I know: WM 2002 are ROM`s ver. 3...
WM 2003 are ROM`s ver. 4...
Why WM2003SE is ROM ver 3.04.00 ?

[LumpiStefan]

Hello!
Help Me.
I know: WM 2002 are ROM`s ver. 3...
WM 2003 are ROM`s ver. 4...
Why WM2003SE is ROM ver 3.04.00 ?

Numbers are just numbers..... Don't care about them. Sure we could be able to adjust the ROM Version to 5.xxxxx, but why?

STefan

[dev.null]

i'm sad to report that i went back to my wm2k3 (att image) after a few weeks of happiness with the sideways display. i had one too many struggles where i wound up rebooting when i was in the middle of something critical (like a call) . for light occasional use it may be ok but if you use your xda like a pda is normally used, it's not usable. i saved the bliss theme and all the others i didn't have before and set up like the way i had w2k3se. i have my volume button back and an infiintely more stable platform...

[tikus]

Halo,
I already finish upgrade my xdaI to WM2003SE but i have a problem, the volume control is not working so.. anyone can help me? wat can i do wit my xda?

thx