1.11 and Bluetooth/Activesync

[delcomp]

My 1.01 device Bluetooth Activesync connection worked perfect. It took me a while to find the correct how-to-install-activesync procedure, but it worked.

I now installed 1.11 and I tried about everything. I cant make the Bluetooth Activesync work again.

Anybody has this working?

Whats the new tab 'COM Ports' in the Bluetooth settings used for?

[Carlis]

My 1.01 device Bluetooth Activesync connection worked perfect. It took me a while to find the correct how-to-install-activesync procedure, but it worked.

I now installed 1.11 and I tried about everything. I cant make the Bluetooth Activesync work again.

Anybody has this working?

Whats the new tab 'COM Ports' in the Bluetooth settings used for?

Worked it out here..
Had to chose new outgoing port in new Port tab in BT .. after I did all the other.. pair and so ..
And I have to reboot the PC.. and let the active sync look for bt connection just when it boot.. after it found it first time .. it works .. always.

Had to try 2-3 times before it worked.. little more tricky then before.. but .. now it works great..

Carlis

[delcomp]

In 'COM Ports' there is only 'New incoming Port', not 'New outgoing port'.

I rebooted the pc, erased all pairs on the S100.
Then paired with the pc with both 'outgoing and incoming' port active. The link on the pc shows a COM4 port attached to the S100 bluetooth settings.

But still no activesync, or no 'New outgoing port' in the 'COM Ports' tab.

Can you desribe step-by-step how you managed to get bt activesync working?

[Carlis]

In 'COM Ports' there is only 'New incoming Port', not 'New outgoing port'.

I rebooted the pc, erased all pairs on the S100.
Then paired with the pc with both 'outgoing and incoming' port active. The link on the pc shows a COM4 port attached to the S100 bluetooth settings.

But still no activesync, or no 'New outgoing port' in the 'COM Ports' tab.

Can you desribe step-by-step how you managed to get bt activesync working?

I open settings ,, System ,, Bluetooth settings. Marked outbound ComPort. then it open BT for pair a unit that I want to use it with .. if not use START in the BT settings.. and pair with the comp.. then in ports.. it showed up.. new outgoing port.. and I choose my comp .. and rebooted the comp .. and connected to it when it rebooted.. from Active sync Tools meny .. Connect via Bluetooth...

Hope it helps..

Carlis