Dead S100?, Did I kill it? HELP me plz...

[embraser]

I really need help on this guys, so please tell me what to do.

I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00

What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........

[dary]

Hi Mate, try this one:

https://after-sales-service.t-mobile.de/eg_online/t-mobile/t-mobile_sw/ma_tmde_10601_130_10500_ship.zip

it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)

Please tell if your lucky =)

[ThEScReW]

I really need help on this guys, so please tell me what to do.

I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00

What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........

Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!

[embraser]

Hi Mate, try this one:

https://after-sales-service.t-mobile.de/eg_online/t-mobile/t-mobile_sw/ma_tmde_10601_130_10500_ship.zip

it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)

Please tell if your lucky =)

I tryed it and got this message:

http://img155.echo.cx/img155/7331/untitled1psd7ub.th.jpg (http://img155.echo.cx/my.php?image=untitled1psd7ub.jpg)

[ThEScReW]

Hi Mate, try this one:

https://after-sales-service.t-mobile.de/eg_online/t-mobile/t-mobile_sw/ma_tmde_10601_130_10500_ship.zip

it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)

Please tell if your lucky =)

I tryed it and got this message:

http://img155.echo.cx/img155/7331/untitled1psd7ub.th.jpg (http://img155.echo.cx/my.php?image=untitled1psd7ub.jpg)

That's the country id error :) normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here :)

[embraser]

I tryed using this:

MaUpgradeUt_noID.exe

but got a .dll error

[kta]

embraser,

see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350

I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)

[embraser]

embraser,

see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350

I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)

I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?

[embraser]

I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...

[HighPingBastard]

Very easy:

1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID

[PapaDocta]

Very easy:

1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID

6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......

cheeeeeeeers

[embraser]

it still didn't work... :cry:
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.

[Mashie]

it still didn't work... :cry:
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.

Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.

The folder you extract the rom to should have the following files visible.


EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll

copy over the no country file and re run it following the above instructions.

[embraser]

I did all you told me to do, downloaded the

ma_tmde_10601_130_10500_ship.zip

extracted the

MA_TMDE_10601_130_10500_Ship.exe

then right-clicked on it an there's no extraction option, only compression on winrar.

[dary]

here it is =)

www.world-board.net/tmde.zip

I Unzipped it and add the NOID exe =)

But I just want to tell you once more, your MDAc is German after this Procedure

[embraser]

Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?

[embraser]

here it is =)

www.world-board.net/tmde.zip

I Unzipped it and add the NOID exe =)

But I just want to tell you once more, your MDAc is German after this Procedure

after that is there any way to put it in english?

[dary]

I really need help on this guys, so please tell me what to do.

I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00

What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........

Now your s100 will be able to turned on =)

[embraser]

http://img286.echo.cx/img286/1999/untitled1p7wu.th.jpg (http://img286.echo.cx/my.php?image=untitled1p7wu.jpg)
http://img286.echo.cx/img286/3774/untitled2psd5jv.th.jpg (http://img286.echo.cx/my.php?image=untitled2psd5jv.jpg)

and after that an error

[embraser]

http://img286.echo.cx/img286/4348/untitled1psdd0mq.th.jpg (http://img286.echo.cx/my.php?image=untitled1psdd0mq.jpg)

then this happens...

[dary]

Then do a hardreset

press the softreset key (the little hole right from the earplug, "NOT THE LEFT OVAL HOLE NEAR THE USB!!!) and at the same time hold the on/off button.

then repeat it, otehrwise bring it to your Operrator

[embraser]

Ok, now I got it to work, but it says it doesn't have bluetooth hardware, but I know it does.Why does this happen?
How do I get it to work with all mobile phone operators?

[embraser]

anyone?