SOLUTION: To the "No Sound" problem on BA

[rcbear]

OK.. Folks... after all the hard time i am facing with my unit. And all the love and care i spend on my BA. I came to the conclusion that the problem with the "No Sound" issues is link to the bluetooth.

What happened to the "No Sound" issue is that when making/receiving a call, the unit will try to connect to the BlueTooth Handfree profile (even if the Bluetooth is turn off!!!!). So, when this happens, the speaker and mic is disable because the unit "thinks" is connected to the Bluetooth Handfree profile.

Some user suggested that when the "no sound" issues occur, you can either soft reest or you can turn on/off your bluetooth and that will cure the problem for a while units it happens again.

What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.

Procedures:

On root "Windows/StartUp" remove the file "Run_BTTrayCE" (same it somewhere else) then reset your unit.

Once the unit is reset, the bluetooth will not load on startup, that means the bluetooth is disable.

if you want your bluetooth to run again. you can either place the "Run_BTTrayCE" back on "Windows/StartUp" or to run the "BTTrayCE" in the Windows dir.

I hope some experts here can take this advice and see if they have any clue with what's going on..

BTW: Upgrading Radio Rom, or Bluetooth stack will not do anything so pls. don't waste your time on it.

I hope i have helped someone out there who is piss with this problem.


Derek :D

HappyGoat EDIT: I took a typo out of the title so it reads better, hope you don't mind... :)

[xdadom]

Hey there!

I like your solution but I personally think it might be a bit overkill! I used to use the Bluetooth all the time on my XDAII but on my XDAIIs I only use it for my bluetooth GPS. I am going to try deleting the profile for my Bluetooth headset and see if that makes any difference (seen as I don't use it because the sound quality is terrible).

I'll post back with results!

Dom

[tobo]

@Derek, pls find my comment here: http://forum.xda-developers.com/viewtopic.php?p=118412#118412

[creamcream]

Hi, I do it as you say
just cut and past the file into my Storage Card
and i do a soft reset

"No sound no voice " problem still exist

Should i just delete the file entirely instead of just cut and paste it some where?

I am afraid that i will loose this file forever therefore i save it on my storage card
i dont know if this going to be a problem?

Please help this problem make me sick for almost 5 days already

[TheLastOne]

Umm, creamcream, there is no reason to worry. In the worst case scenario where you lose the file, you can just re-flash your rom, or ask another forum member to send you the file. I would gladly do so.

creamcream: Is your bluetooth disabled? And, if so, you are still experiencing the no-sound problem? Because if you are, then you have discredited this theory.

[creamcream]

Hi, i solve the problem at this time
I just want to knwo how u update 1.40 rom?
is it stable?
Official?

I am worry that if that is not official it will be very dangerous for my Xda IIS
by the way is it fit for all model
such as

sx 66, ppc 6600 and Xda IIs

is it simple to do so?
can i have the link where to download thankyou "thelastone"

[TheLastOne]

If you are planning on upgrading your rom to the current highest version, 1.40.00, then I recommend you check out wiki for instructions:

http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel

If you do it properly, it is perfectly safe.

[rcbear]

Hi, I do it as you say
just cut and past the file into my Storage Card
and i do a soft reset

"No sound no voice " problem still exist

Should i just delete the file entirely instead of just cut and paste it some where?

I am afraid that i will loose this file forever therefore i save it on my storage card
i dont know if this going to be a problem?

Please help this problem make me sick for almost 5 days already

Hi Creamcream

I just want to know when you move "Run_BTTrayCE" to your SD Card and follow by a soft reset. When you unit boots up, do you see the BT icon on the bottom right hand corner? If the icon is still there, that mean you haven't successfully disable your Bluetooth from startup.

Also, the other way to try it is try running your bluetooth manager. if your bluetooth is turn off, it will give you a errors message saying your Bluetooth fail to turn on.. somthing like that.

Pls let me know your result....

Derek

[stachoo]

What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.


You don't need to disable BT completely,
it will be enought to disable Hands-Free service

in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure

[2 phat]

What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.


You don't need to disable BT completely,
it will be enought to disable Hands-Free service

in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure

@stachoo...wow, I hope this works for me..Ive just disabled the bluetooth using your method... will have to check the results...if this works for me then your a Lifesaver!!!!Tnx.

[2 phat]

It has been almost 24 hrs since I disabled the hands free service... and I did about 5 calls, and until now I havnt experienced any "no sound" problem...I hope this is it!!!! Thanks!!! :lol:

[mxx]

GUYS

what about this problem :

The bluetooth turns off when you power off the screen ??

[kennethm]

My findings so far:

If I keep Bletooth on all the time "nosound" never happens. At least not for about a week and did no softresets. However after some time something brakes regarding bletooth serial. The GPS thinks it´s online but nothing gets through. Closing and opening the serial port cures it momentarily. (This was with handfree services enabled). This never happend when I toogled Bluetooth on/off regulary.

Tried the trick to disable handsfree service yesterday but without unchecking "use handsfree for telephone calls". With Bluetooth turned off tonight the nosound reappeared, so just disable the main handfree service is not enough.

Have now also unchecked "use handsfree for telephone calls" and will report back if nosound occurs again.

(To the guy whos Bluetooth turns off: You probably have an old sw version where our nosound problem had not been introduced yet. 1.12.00 or soo...)

[kennethm]

What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.


You don't need to disable BT completely,
it will be enought to disable Hands-Free service

in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure

@stachoo...wow, I hope this works for me..Ive just disabled the bluetooth using your method... will have to check the results...if this works for me then your a Lifesaver!!!!Tnx.

Disabled BT handfree and unchecked "Telephone calls" yesterday but unfortunately the nosound bug hit anyway tonight.
The idea to disable the handsfree service was a nice one but no, it did not prevent the nosound bug to strike!
Back to my own solution that sofar has prevented the nosound bug: Keep Blutooth on all the time.

[faaz]

right guys I have been reading and trying but the only thing thats worked for ME was radio rom upgrade seriously. I have an SPV m2000, i have tried all ROM updates, and at the moment I am on is...
by the way I upgraded to radio version 1.12 but this never solved it so i went back to 1.10 which works,

ROM version: 1.40.00 WWE
ROM date: 03/10/05
radio version: 1.10.00
protocol version:1337.391
ExtROM version:1.31.124

I dont know but i managed to only install what I wanted of this (orange rubbish ext rom)
NOW FOR THE DOWNSIDE MY UNIT USED TO BE SOFT RESETTED EVERYDAY, but now i only reset very very LESS times, its definetly better than before I can vouch for that. BUT WE NEED SOMETHING SOLID.

[2 phat]

Product recall????? :lol:

[hishnik]

I have no sound from speaker (only on incoming call - it rings)
But in all other cases it keeps silence.
Flashing new ROM doesn't helps too.
It didn't helps for me.
Nor Bluetooth disabling, nor Flashing.
You say that you solve that issue.
Sorry - but I don't understand how did you do it?
Answer please -
What to do?

Thanx in advance.

[arieltools]

OK, just to say I'm having the same problem for too long time now. No sound on calls nor the other party can hear me.

I've opened another thread:

http://forum.xda-developers.com/viewtopic.php?t=44440

And, like I said there, I'm desperated. :(