Possibly working MMS on Magneto

[ivant]

Hey all,

i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.

i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.

[toenailed]

THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. :) .. thanks again..

PS dont use local number coding instead use international Number coding
example

09173xxxxxx4 <- local
+639173xxxxx4 <-international

if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

try any of this three cab see which one will work for you

[awojtas]

I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.

I have to soft-reset to get out of it as "Cancel" does not work.

Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ

I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it :)

[jenellej]

THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. :) .. thanks again..

PS dont use local number coding instead use international Number coding
example

09173xxxxxx4 <- local
+639173xxxxx4 <-international

if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

Toenailed,

Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?

Thanks

[TiBiSMART]

Sending is work perfectly, but the receive...

[rictec]

hello to all

i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error

i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc

help needed
thanks

[jenellej]

THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. :) .. thanks again..

PS dont use local number coding instead use international Number coding
example

09173xxxxxx4 <- local
+639173xxxxx4 <-international

if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

Toe,

Could you post your settings for Pixer4?

My settings are below and I cant seem to send nor receive..

Thanks..

[toenailed]

hi jenellej.. just run the GPRS cab ..

under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings

for sun

"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"


for GLobe

"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"

for Smart

"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"

:)

i already try the GLOBE and SUN .. but i havent try it with SMART yet

one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does .. :)

PS Dont install also ArcSoft MMS COmposer :)

[mariolouis]

I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!

[rictec]

can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol

gateway 213.30.27.63
url http://mms/servlets/mms
port 9201

[muhelen]

Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.

[mariolouis]

Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.

it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.

[mariolouis]

for SMART (philippines):

here's the settings for Pixer..

Start/Settings/Connections/Connections

Click Advanced Tab, choose Select Networks

Under "Programs that automatically connect to the Internet should connect using:", click new.

Under General Tab:
Enter a name for these settings: Smart MMS

Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.

Access point name: mms

Click Next then Finish.

NOw open Pixer4.

Tap Options/Preferences/Advanced.

Wap Gateway IP Address:
10.102.61.46

MMS URL:
http://10.102.61.238:8002

Service:
Smart MMS

Click OK, check "Get Message Immediately" then OK.


for GLOBE and SUN settings, refer to toenailed's post above.


i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:

[rav]

I can send using Pixer4 on the Orange network. Not sure about receiving yet.

My Pixer4 settings:

Wap Gateway IP Address:
192.168.224.10

MMS URL:
http://mms.orange.co.uk

Service:
Orange MMS

[Rabia]

works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:

[mwilmar]

i'm not try it yet but i thought it work.... :roll:

[muhelen]

Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.

it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.

mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!

[mwilmar]

this two cab must instaled

[jenellej]

this two cab must instaled

Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?

[mwilmar]

this two cab must instaled

Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?

Arcsoft MMS Composer 1.6

[jenellej]

this two cab must instaled

Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?

Arcsoft MMS Composer 1.6

Arcsoft now works with Magneto? :)

[jenellej]

I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!

dude how were u able to receive MMS with Pixer? I was able to send one to myself but I was not able to receive it...

[IMate->WM2k5]

this two cab must instaled

Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?

Arcsoft MMS Composer 1.6

Arcsoft now works with Magneto? :)

Original ArcSoft 1.6 doesn't work with WM2005

[sysherezal]

1st of all let me sya this forum ROCKS!!! Buzz&the gang ..you guys are GREAT!!! I am from Malaysia and this forum have solve most of my problems...my only question now is does wm5 have mms capabilities and if so which program should i use?pixer or arcsoft or ewap....MMS is quite important for me....anyone??

[rictec]

well pixar4 is the only one anyone put to work in 2005
i did get it yet

arcsoft must be recompiled to 2005 so doest work
and ezo i dint get it to work yet
thats it for know i think

[IMate->WM2k5]

Hi there,

Just visited Pixar's site and found a trial beta of this tool for XDA with send and receive functions!

Download it here - http://electricpocket.com/PixerPPCPhoneInstall.exe

Didn't install it yet...

EDITED:
Just installed and got it working for SENDING, but not for RECEPTION :-(((

[rictec]

this is what i get i changed evey possible combination

my card as mms access i tested it

help please

[mariolouis]

I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!

dude how were u able to receive MMS with Pixer? I was able to send one to myself but I was not able to receive it...

did you tick the "Get Message Immediately" box? try sending yourself an mms. or from other phones. i think the device hangs when you send a large mms. try sending a small picture first or just plain text just to see if your settings are correct. :wink:

[IMate->WM2k5]

Hey mariolouis,

Does your PixarMMS really work for MMS reception???

Thx

[hkyoon]

why i got this error?im from malaysia, DiGi operator.

[Daemon_px]

this is what i get i changed evey possible combination

my card as mms access i tested it

help please

tried checking service configs @ www.qtek.com.pt ?

[mariolouis]

Hey mariolouis,

Does your PixarMMS really work for MMS reception???

Thx

Yup! Both sending and receiving mms working perfectly. :wink:

Here's a picture of my inbox..

[mariolouis]

why i got this error?im from malaysia, DiGi operator.

You should use the international number format. (e.g. +63917****)

[hkyoon]

why i got this error?im from malaysia, DiGi operator.

You should use the international number format. (e.g. +63917****)

yes, can work!! :oops: but also cant send and received too. :(
anyone here is from malaysia and using digi, can work?and u all is using pixer version?

[rictec]

tried checking service configs @ www.qtek.com.pt ?

i have all configs ok still cant find what the problem is yet...


tried a diferent version

and test again [/quote]

[rictec]

found some config from arcsoft mms but it points to the same location http://mms/servlets/mms
autentication is ok chap/8 rechecked
if i mess up with the wap gateway i have a 14 error connection failed so wap gateway ok
review some logs from a previous stg file and didnt found anything usefull
i do beleave now thats a pixar4 problem 97% and puf it says that
even if i put anything in the mms server it says exactly the same thing
mms rejected no reason given check wap etc etc

ToDo find register file in stg any help there i will be glad ......
will try aggain after some sleep :-)

the god of register is helping so ...luke the force will be with you (sleepy lol)

[rictec]

pixer doesnt work for me so i moved on
i found ezwap2.5 o2xda version and i did send a mms with it and my other phone received it so

still some problems like it eats up memory whem creating a new message but i can send thats good lol
will try receiving to
and find out why its eating all my storage memory hum

[rictec]

well partialy it is
i find out that it was creating a huge 45 to 62 mega int /Aplication Data/volatile so

searching for it i found out that is the /temp dir path
and i change the temp dir path in the register to storage card
this info can be helpful to put some other programs to work in the buzzmobile 2005 h
after that i can send pictures and sound and test and the program dont stop responding
maybe the problem was space after the 64mb barrier automatic settings slider in win2003 could give 80 or more storage space to the program
well its going the way i need it

i cant receive yet but sending its not a problem any more

[rictec]

after changing tempdir to storage card some program stop working
spb gprs monitor is one of them

[ovidius]

Lads

Does anyone here knows the MMS setting for O2 ireland?

Cheers

Ovi

[ivant]

THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. :) .. thanks again..

PS dont use local number coding instead use international Number coding
example

09173xxxxxx4 <- local
+639173xxxxx4 <-international

if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

try any of this three cab see which one will work for you


Wow i got a post in the wiki! thats awesome lol.

anyway what i mean is i upgraded to magneto and now when it starts it doesnt go through all the callibration of carrier and stuff like the default setup did, and so normal calling and text messaging works, but there are no settings set up for gprs or anything. so when i go into connections and select networks it just has the default "my isp" and "my work network". i need to know the settings for new connection like what the access point is etc. Im with Optus in australia if anyone can help out

[achille2005]

Hello, I download Pixer4 but in the setting there isn't Tim .
How about my settings?
can you help me please?

[conneri]

try MMS in WM2005? yes or no?

[d3vil]

any luck receiving mms using vodafone portugal? i can connect, auth ok, but gives an error trying to download..

[Mgolden]

Thank you

[mjames_84]

Has anyone tried this program on O2UK? If so could you let me know what settings I need to use for WM5 and Pixer?

Even if it just works for sending MMS Messages it would be a massive improvement over nothing at all!

[IMate->WM2k5]

Hey all,

i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.

i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.

http://forum.xda-developers.com/viewtopic.php?p=142617#142617