blackest_knight
8th June 2005, 09:46 AM
ok here's the problem
you want to connect to a wired network or even simply a single pc connecting to the net on a broadband or dialup connection.
if there was a wireless router then it wouldnt be a problem. your pda would connect to the wireless network and the wireless router would give your pda an address and everything would work.
without the wireless router you don't get allocated an ip address.
well problem solved www.nat32.com has a program called nat32e which you can get a demo version of (works for an hour before needing to be restarted)
essentially this is a nat router which runs on any pc running windows
you need a wireless card in addition to its ethernet connection to the net.
I did this with 2 wireless cards so in theory it could be used to extend the effective range of an existing wireless network too
installation is simple but basically you give the wireless card i used a belkin usb 54g dongle type on channel 6 a fixed address and tell it to connect to an adhoc network called "whatever"
you add a network packet driver, nat32 holds your hand installing this,
then the pc needs a reboot.
first time you run nat32 it runs through the configuration you tell it what card connects to the internet and which card connects to your private net
(that is your adhoc wireless network) it sets things up
scan for a network on your pda tell it to look for adhoc networks connect to "whatever" and tell it when it asks, it connects to work.
you should then have wireless access to the net.
if your doing this with two wireless cards make sure you have seperate channels set up for your infrastructure network and your adhoc network.
the belkin 54g usb wireless dongle costs about 25 from staples or 30 from pc world (both are local for me)
the host pc will run fine without any problems with nat32 running or not
no proxys need configuring a registered verion of nat32 costs from
$25 but this gets you registered for just one pc and really you want it so you can roam with a usb wireless card in your pocket and your pda.
I think adhoc wireless networking works for up to 30 wireless points.
i did it with a pda, mdaIII and a laptop.
basically like ics but with less problems
I think you can do this with bluetooth as well but that really isn't fun
hope this is useful sorry its so rough but i have to get to work
you want to connect to a wired network or even simply a single pc connecting to the net on a broadband or dialup connection.
if there was a wireless router then it wouldnt be a problem. your pda would connect to the wireless network and the wireless router would give your pda an address and everything would work.
without the wireless router you don't get allocated an ip address.
well problem solved www.nat32.com has a program called nat32e which you can get a demo version of (works for an hour before needing to be restarted)
essentially this is a nat router which runs on any pc running windows
you need a wireless card in addition to its ethernet connection to the net.
I did this with 2 wireless cards so in theory it could be used to extend the effective range of an existing wireless network too
installation is simple but basically you give the wireless card i used a belkin usb 54g dongle type on channel 6 a fixed address and tell it to connect to an adhoc network called "whatever"
you add a network packet driver, nat32 holds your hand installing this,
then the pc needs a reboot.
first time you run nat32 it runs through the configuration you tell it what card connects to the internet and which card connects to your private net
(that is your adhoc wireless network) it sets things up
scan for a network on your pda tell it to look for adhoc networks connect to "whatever" and tell it when it asks, it connects to work.
you should then have wireless access to the net.
if your doing this with two wireless cards make sure you have seperate channels set up for your infrastructure network and your adhoc network.
the belkin 54g usb wireless dongle costs about 25 from staples or 30 from pc world (both are local for me)
the host pc will run fine without any problems with nat32 running or not
no proxys need configuring a registered verion of nat32 costs from
$25 but this gets you registered for just one pc and really you want it so you can roam with a usb wireless card in your pocket and your pda.
I think adhoc wireless networking works for up to 30 wireless points.
i did it with a pda, mdaIII and a laptop.
basically like ics but with less problems
I think you can do this with bluetooth as well but that really isn't fun
hope this is useful sorry its so rough but i have to get to work