PDA

View Full Version : HELP !!! Radio 1.13.0 SD Card upgrade failure


mmgirlmm
27th July 2005, 06:05 AM
Radio 1.13.0 SD Card upgrade failure
Error :
SD Download
=========
Section =1
Not Allow
Update!

Right now when the PPC soft reset the right of botton corner display NO GSM

Please Help me Thanks a lot.

chakra
27th July 2005, 07:00 AM
didnt you save your origional radio?

or just try again??

it worked for me first try. what did you do??

Jainoxi
27th July 2005, 07:11 AM
You should have overwritten the first 444bytes of your 1.13 ROM with 444bytes a SD card backup of an older Radio ROM!

mmgirlmm
27th July 2005, 07:15 AM
thanks your adivse let try again

gradius44
27th July 2005, 03:41 PM
416 bytes would be ok, I have done and works fine.

rjtd
27th July 2005, 03:42 PM
What software do you use to replace the bytes?

gradius44
27th July 2005, 03:47 PM
Hex Editor, you could find it at the ftp server of xda-developers.

/Magician/Tools/Backup_tools1/

mmgirlmm
27th July 2005, 05:08 PM
What software do you use to replace the bytes?
I am usng the Hex editor

HBK
27th July 2005, 07:53 PM
416 bytes would be ok, I have done and works fine.
Be very carefull with that. This is NOT a full ROM backup, so the layout is different. I would strongly suggest copying all the bytes, or you could end up with that dreaded paperweight.

bruxelles5
27th July 2005, 08:58 PM
what if you don't do the 444 bytes things ?

can you just copy the radio as is ?

thanks

HBK
27th July 2005, 09:07 PM
I have no clue, and I would never try to do it. Far too big a risk to take, just to save 1-2 minutes...

bruxelles5
27th July 2005, 09:17 PM
i say this because I don't understand this part (overwriting the 440 Bytes from 1.13 Radio with the 440 bytes of my older radio 1.12 )

is that this way or vice versa ?

When you open an hex editor ? What do you see ? how can you see this is the first 440 bytes ?

thanks man if you can help me

Jainoxi
28th July 2005, 12:07 AM
Those first few bytes, in this case 444 of them, contain an unique device ID. That ID is needed to 'authenticate' the ROM-image when being flashed to the device. I've tryed to flash my Magician without patching my new ROM with a number of bytes from the older (backup) ROM. The device gives my some freaky error, but nothing else happens, since the bootloader detects a 'bad' ROM.