Upgrade Magician radio 1.13 without SD card!!!

[tupisdin]

I have made normal NBF file.

ftp://xda@ftp.xda-developers.com/Magician/Radio/MagicianRadio_1.13.00_maupgrade.zip


Just put your device in bootloader mode and run maupgradeut.


Enjoy! :)

[TheCroc]

Thanks tupisdin,

I have just downloaded it and am reloading from Sprite Back Up.

I appreciate this

Regards

The Croc

[Loboman]

Yeah, big thanks! Gonna try it now.

[Loboman]

Works like a charm! Thanks again!

[trickyd]

I have made normal NBF file.

ftp://xda@ftp.xda-developers.com/Magician/Radio/MagicianRadio_1.13.00_maupgrade.zip


Just put your device in bootloader mode and run maupgradeut.


Enjoy! :)

Would you be able to make a .nbf file for the Extended ROM (1.12) for the T-Mobile MDA Upload? If not, how about an easy tutorial on making one...

[HBK]

That's a job well done! Thanks. Would you mind to tell us how you did it?

[JeRoMe_aKa_JaY]

works great.
Someone found BIG differences??? ;)

[warisorn]

I can't d/l this file, Does it broken? pls. help me
Thanks

[nsriza]

TQ tupisdin

[danr]

Hi,

I tried several times to download the file - no response!

Please check its location and put it attached to your reply..

Thanks in advance-

[Finzzownt]

I have made normal NBF file.

ftp://xda@ftp.xda-developers.com/Magician/Radio/MagicianRadio_1.13.00_maupgrade.zip


Just put your device in bootloader mode and run maupgradeut.


Enjoy! :)

Orange M500 (Qtek S100) is a Magician right? If so, than why do I get ERROR 100: MODEL ID ERROR? Is not a Magician?

[tupisdin]

decrypt radio_.nbf with

xda3nbftool.exe -x radio_.nbf radio_.nba 0x20040523

change device type with this command

xda3nbftool.exe -sd PM10B radio_.nba

correct checksum with

xda3nbftool.exe -c -u radio_.nba

encrypt radio file back

xda3nbftool.exe -x radio_.nba radio_.nbf 0x20040523

and then run maupgradeut again!


Thats all :)

Enjoy.

[pietrucci]

Any idea, when I upgrade to Radio 1.13 and then restore from a backup (with Radio 1.12) will I overwrite any systemfiles from Radio 1.13 with 1.12. In other words: will I lose the upgrade when I restore?

[JeRoMe_aKa_JaY]

You don't have to erase or make a backup of your magician when you JUST update the radio.

Just put your magician in bootlader mode and apply the radio.nbf.

[pietrucci]

You don't have to erase or make a backup of your magician when you JUST update the radio.

Just put your magician in bootlader mode and apply the radio.nbf.
But after (or because of?) the bootloader mode, my Magician (MDA Compact) does a hard reset!

[tupisdin]

Yes!

[pietrucci]

Yes!Leaves my original question: after I upgrade to Radio 1.13 and then restore to my 1.12 backup is my Radio still upgraded to 1.13 or am I back to 1.12 (in other words: are the Radio systemfiles excluded by a restore)???

[danr]

Dear tupisdin,

I really tried to download your file from the connection you gave.

No success.

Can you upload it here, in your response?

Thanks..

[JeRoMe_aKa_JaY]

Dear tupisdin,

I really tried to download your file from the connection you gave.

No success.

Can you upload it here, in your response?

Thanks..

good link:

ftp://xda:xda@ftp.xda-developers.com/Magician/Radio/MagicianRadio_1.13.00_maupgrade.zip

[danr]

Thanks..

[gguyaz]

HELP!

I try this:

decrypt radio_.nbf with

xda3nbftool.exe -x radio_.nbf radio_.nba 0x20040523

change device type with this command

xda3nbftool.exe -sd PM10B radio_.nba

correct checksum with

xda3nbftool.exe -c -u radio_.nba

encrypt radio file back

xda3nbftool.exe -x radio_.nba radio_.nbf 0x20040523

and then run maupgradeut again!

BUT: on -X code password doesn't work (0x20040523) on SPV_M500
Is PM10B correct for SPV_M500?
Doing this command files and going thru errors I got a message
from maupgradeut with a wrong device ID. Can someone help?
Thanks

[gguyaz]

HELP!

I try this:

decrypt radio_.nbf with

xda3nbftool.exe -x radio_.nbf radio_.nba 0x20040523

change device type with this command

xda3nbftool.exe -sd PM10B radio_.nba

correct checksum with

xda3nbftool.exe -c -u radio_.nba

encrypt radio file back

xda3nbftool.exe -x radio_.nba radio_.nbf 0x20040523

and then run maupgradeut again!

BUT: on -X code password doesn't work (0x20040523) on SPV_M500
Is PM10B correct for SPV_M500?
Doing this command files and going thru errors I got a message
from maupgradeut with a wrong device ID. Can someone help?
Thanks

[fone_fanatic]

how can i start bootloader mode without hardreseting my device?

[louktarn]

how can i start bootloader mode without hardreseting my device?
No Way :mrgreen: