View Full Version : Which ROM is the best for XDA 2i???
felixx_do
13-08-2005, 05:54 PM
Hi all,
I wonder which ROM is best for my XDA 2i?I use the Modified ROM V.1.11.00 WWE- Radio 1.03.00-ExtROM 1.11.162.However,the signal is not stable;I can't connect to GPRS as well(Im using O2 UK PAYG).
DAz999
23-08-2005, 05:13 AM
Hi, I've been looking into which is the best ROM, I was thinking of swapping to the I-mate PDA2 ROM. But the general feeling is the modified 02 with Radio 1.03. This is what I have put on mine and I'm on PayT vodafone UK, my GPRS worked fine after I installed the attached file. :lol:
Unless your loaded a word of warning Vodafone charge £7.50 for a 1Mb download of data on PayT!!!!!!!! I found this out after I had subscribed to TomTom Traffic on TTN 5.1, waste of my money now, GPRS too expensive, looking at other PayT deals ie. T-Mobile +£2.60 per Mb, although still too expensive. :x
Copy to XDA IIi. Access the copied file on your XDA IIi , click on it to run and it will install all the UK settings for Vodafone. Please keep a copy, as the install deletes itsself automatically. :twisted:
DAz999
11-09-2005, 12:50 AM
Sorry was half asleep when I wrote my original replay, which refers to vodafone not 02, please find the correct file for 02 PAYT attached. :D
Danny-B-
11-09-2005, 10:05 AM
are these the settings for the free GPRS on PAYT on O2 ?
or have they realised their error yet ?
haider
11-09-2005, 11:29 AM
hello,
i've been looking everywhere for the 02 paymonthly gprs settings, i tried the pay as you go settings, but it didnt seem to work.
i was on the phone to 02 for hours last time until we got it to sort of half work, but i had to hard reset when i updated my rom. i installed with corporate user, and now i dont have gprs settings again. anyone know how to do it?
much much appreciated!
haider
blueclue7
11-09-2005, 03:21 PM
How do you work with CAB files? Just double-click like an executable? What does this update to the GPRS do?? Will it affect my WiFI settings?
guoper
11-09-2005, 03:41 PM
How do you work with CAB files? Just double-click like an executable? What does this update to the GPRS do?? Will it affect my WiFI settings?
the cab files will only modify/add settings into your registry. it will not affect your wifi settings
MaskedMarauder
11-09-2005, 09:32 PM
hello,
i've been looking everywhere for the 02 paymonthly gprs settings, i tried the pay as you go settings, but it didnt seem to work.
i was on the phone to 02 for hours last time until we got it to sort of half work, but i had to hard reset when i updated my rom. i installed with corporate user, and now i dont have gprs settings again. anyone know how to do it?
much much appreciated!
haider
Start>Settings>Connections>Connections
set up O2 mobile web
http://www.bigtrucker.co.uk/images/GPRS/display_2.JPG
Under My ISP select "Add a new modem connection"
http://www.bigtrucker.co.uk/images/GPRS/display_3.JPG
Enter O2 Mobile Web as the name and select Cellular Line (GPRS)
next button
http://www.bigtrucker.co.uk/images/GPRS/display_4.JPG
Access point name: mobile.o2.co.uk
next button
http://www.bigtrucker.co.uk/images/GPRS/display_5.JPG
User name: username
Password: password
Advanced Button
http://www.bigtrucker.co.uk/images/GPRS/display_6.JPG
Use server-assigned IP address
NO software compression
NO header compression
Servers tab
http://www.bigtrucker.co.uk/images/GPRS/display_7.JPG
Use specific server address
DNS 193.113.200.200
Alt DNS 193.113.200.201
OK button (top right of screen)
Finish button
OK Button (Top right)
Set Up O2 WAP
On the connections screen under "My Work Network"
http://www.bigtrucker.co.uk/images/GPRS/display_2.JPG
Add a new modem connection
http://www.bigtrucker.co.uk/images/GPRS/display_8.JPG
Enter O2 WAP as the name and select Cellular Line (GPRS)
Next
http://www.bigtrucker.co.uk/images/GPRS/display_9.JPG
Access Point Name: wap.o2.co.uk
Next
http://www.bigtrucker.co.uk/images/GPRS/display_10.JPG
User Name: user
Password: password
Finish
Screens Grabbed With Pocket Screen Capture 1.0 (http://www.pocketpccity.com/software/pocketpc/Pocket-Screen-Capture-2002-3-2-ce-pocketpc.html)
blueclue7
11-09-2005, 09:37 PM
Again, do I simply double-click the CAB file to install the "registry" (if that is what happens)? And specifically, what will this O2_UK_PAYG file do to my settings? If I add something like the TMobile caller ID patch (another CAB file), how will that affect the general O2 settings of my XDA unit (I am a TMobile customer running under the O2 ROM)?
MaskedMarauder
11-09-2005, 09:41 PM
Again, do I simply double-click the CAB file to install the "registry" (if that is what happens)? And specifically, what will this O2_UK_PAYG file do to my settings? If I add something like the TMobile caller ID patch (another CAB file), how will that affect the general O2 settings of my XDA unit (I am a TMobile customer running under the O2 ROM)?
To run a CAB file just find it with File Explorer and click it. It will automatically be deleted afterwards
Your new settings should either overwrite the old ones or add an addition set of network settings that you then select as the defaults.
haider
12-09-2005, 12:35 AM
Thanks man, i really really really appreciate it. must have been long! you didnt have to include pictures!
Thanks again anyway. i really do appreciate it. :) :oops:
MaskedMarauder
12-09-2005, 09:04 AM
Thanks man, i really really really appreciate it. must have been long! you didnt have to include pictures!
Thanks again anyway. i really do appreciate it. :) :oops:
No worries chap, any more problems just shout!
As for the pictures etc, I would sooner do it properly once and refer people who ask in the future to there, than end up doing it over and over....
DAz999
12-09-2005, 02:46 PM
To run the cab files, copy to your PDA and double click to run. These cabs just update the registry, it doesn't matter. As long as your PDA is SIM-Free, any carrier should work.
They are the official files from the IMATE website, which has cabs for most carriers including worldwide. You can only download these files from IMATE website if you have a registered device. They should work on all XDA or other brand names etc. :twisted:
DAz999
12-09-2005, 03:14 PM
I have uploaded the rest of the available cabs for the UK carriers, contact and PAYT. So in combination with my earlier uploads, these are all the UK carrier settings for the UK
There are cabs for other countries and carriers available, let me know your carrier, contract (PAYT or Contract) And I will try to locate the correct cab file.
These are the offical cabs from IMATE. They only update your registry and nothing else. Copy to your PDA and click to run.
haider
12-09-2005, 05:48 PM
just one other thing, once the gprs connects, its stays on? how do u disconnect it - save battery? it used to end connection once mms was d/l or u/l and there was an option to disconnect when pressing on G icon?
small detail cos i can always soft reset or activate wireless, but would be handy, thanks again!
DAz999
12-09-2005, 05:56 PM
Again, do I simply double-click the CAB file to install the "registry" (if that is what happens)? And specifically, what will this O2_UK_PAYG file do to my settings? If I add something like the TMobile caller ID patch (another CAB file), how will that affect the general O2 settings of my XDA unit (I am a TMobile customer running under the O2 ROM)?
To run a CAB file just find it with File Explorer and click it. It will automatically be deleted afterwards
Your new settings should either overwrite the old ones or add an addition set of network settings that you then select as the defaults.
If you are a T-mobile cstomer,then I suggest you use the T-Mobile file I have uploaded, it is for T-Mobile contract users. It doesn't matter what ROM you have, it only sets up the gprs and wap settings, by writing to the registry on PDA. :D
DAz999
12-09-2005, 06:03 PM
just one other thing, once the gprs connects, its stays on? how do u disconnect it - save battery? it used to end connection once mms was d/l or u/l and there was an option to disconnect when pressing on G icon?
small detail cos i can always soft reset or activate wireless, but would be handy, thanks again!
I just open 'Wireless Manager', if the GPRS is connected then the icon will be green, tap the icon to disconnect. :twisted:
haider
12-09-2005, 06:28 PM
yeah, thanks i did realise afterwards. i think i'm just acting a bit spoilt. although i still have a few more bugs in the phone... :( (multiple copies of my messages are being sent out).
thanks everyone. :)
DAz999
12-09-2005, 07:03 PM
Hi, all
I have had a look at the carrier cab installs, I uploaded and found out that you can change your splash screen with these cabs as well.
XDA IIi installation
Go to this link for instructions on how to create the 2 files you will need.
http://pocketpcdubai.infopop.cc/groupee/forums/a/tpc/f/582600994/m/138105069
They have the Windows program for conversion and some example jpg's or create your own Splash screen. This program runs on your PC.
In the program save your chosen jpg as twice as system1.nb and then repeat with same jpg and save as system2.nb.
Copy these files to your PDA Windows directory. Then copy the correct carrier cab file (listed earlier), click to run, it will then install/re-install your GPRS and WAP settings and update your splash screen, it will probably freeze, then do a soft reset and voila you will see your new splash screen. To change just repeat the process and overwrite your 2 files in windows directory with your new ones and use the cab again.
**Please note the GPRS cab files will only update your splash screen if you have copied the correct files to the windows directory on your pda.
If you do not want to change your splash screen, then simply run the cab file without copying/creating system1 or system2, and this will just install your chosen carrier internet settings etc**
One more thing I mentioned in an eariler post that the cabs update your GPRS and WAP, well they also install your MMS settings as well.
Enjoy :twisted:
DAz999
12-09-2005, 09:08 PM
Sorry made a mistake on the save files not system1.nb/system2.nb.
The correct file names are splash1.nb and splash2.nb. :wink:
sainthalo
24-09-2005, 01:43 PM
Will the above CAB file install settings into my MAGICIAN (ORANGE SPV M500)?
Thank you.
DAz999
24-09-2005, 02:29 PM
Hi Admin,
Where have all the cab files for the operator settings gone? :(
Thanks
DAz999
24-09-2005, 02:31 PM
Hi Admin, they suddenly appeared again, so please ignore my last message :lol:
DAz999
24-09-2005, 02:40 PM
I don't know, but since it has WM2003SE, I don't see why not, it only writes to the registry and inserts the settings that can be done by manual input. Not sure about spash screen mod.
Can Anbody else help sainthalo?
:D
DAz999
11-10-2005, 01:09 PM
Please find attached the Telstra Australia GPRS/MMS/WAP Cab file
johnwx
18-11-2005, 05:34 PM
Tried to use the payg o2 cab file v2 with no joy on my o2 XDA2i.
I am using a PAYG sim!
If I try internet page comes back with page not found?
If I set up e-mail comes back unable to download check modem settings?
Pulling what hair I have left out but it does not help :lol:
Do I need to call o2 to enadle gprs on sim card?
choppidge
21-11-2005, 11:27 AM
Will the O2 Pay n Go CAB for the XDA lli work on a XDA 2s??
many thanks.
CANT USE WAP n GPRS on O2 PAY N GO???
then flame O2 until they support us.
http://forum.xda-developers.com/viewtopic.php?p=183547#183547
mycare@o2mail.co.uk
Edeninc
23-11-2005, 03:53 PM
Tried to use the payg o2 cab file v2 with no joy on my o2 XDA2i.
I am using a PAYG sim!
If I try internet page comes back with page not found?
If I set up e-mail comes back unable to download check modem settings?
Pulling what hair I have left out but it does not help :lol:
Do I need to call o2 to enadle gprs on sim card?
ur not the only one then. didnt work for me neither!
choppidge
23-11-2005, 06:52 PM
I have been having nightmares with this, I have been getting some help though and freebees.
Mail free your complaints / queries:
mycare@o2mail.co.uk or
viveck.dev@o2.com (director of customer services)
From O2 : Re: No free WAP and or GPRS.
A) Your mobile number 07********* has a free allowance bundle of 300 text messages and 300 GSM WAP minutes. This is why you are charged for accessing GPRS WAP.
I request that you immediately call 2425 free or text 'ONMSG' to 21300 to change your free 300 GSM WAP minutes to 1 Mb GPRS WAP.
Your Anniversary date is the **nd of every month.
B) I cannot find any top-up attempt for your mobile number 07******** in the last 30 days. This is why your free allowance bundle has not been reactivated.
"ACTUALY I DID TOPUP AT 10.A.M. I RECIEVED MY TOPUP AT ABOUT 1PM"
Please let us know which top-up method was used. E-TOPUP WAS USED
I ASKED FOR SOME COMPENSATION:
C) You are eligible for a free Joining Treat AND an O2 Treat.
Please click the links given below for more details:
http://www.o2.co.uk/joiningtreats
http://www.o2.co.uk/treats?ref=hpmod4imgTreats
HOPE THESE TREATS WORK FOR YOU! :)
For further details about O2, please visit our online Help Centre at:
http://www.o2.co.uk/help
verandah
09-03-2006, 11:53 AM
Hi, I used your wonderful pictures to set up my gprs and they work beautifully. Thank you. However, I had to hard reset my XDA II as I think I'd been messing around with the gprs settings and had dozens saved.
Now, rather oddly, when I click on the O2 Active button at the top, it's all in German. I've definitely got the UK ticked in the connections box. It's not a huge problem, but does anyone have any ideas how to get it back to English?
Thanks again
[
Start>Settings>Connections>Connections
set up O2 mobile web
http://www.bigtrucker.co.uk/images/GPRS/display_2.JPG
Under My ISP select "Add a new modem connection"
http://www.bigtrucker.co.uk/images/GPRS/display_3.JPG
Enter O2 Mobile Web as the name and select Cellular Line (GPRS)
next button
http://www.bigtrucker.co.uk/images/GPRS/display_4.JPG
Access point name: mobile.o2.co.uk
next button
http://www.bigtrucker.co.uk/images/GPRS/display_5.JPG
User name: username
Password: password
Advanced Button
http://www.bigtrucker.co.uk/images/GPRS/display_6.JPG
Use server-assigned IP address
NO software compression
NO header compression
Servers tab
http://www.bigtrucker.co.uk/images/GPRS/display_7.JPG
Use specific server address
DNS 193.113.200.200
Alt DNS 193.113.200.201
OK button (top right of screen)
Finish button
OK Button (Top right)
Set Up O2 WAP
On the connections screen under "My Work Network"
http://www.bigtrucker.co.uk/images/GPRS/display_2.JPG
Add a new modem connection
http://www.bigtrucker.co.uk/images/GPRS/display_8.JPG
Enter O2 WAP as the name and select Cellular Line (GPRS)
Next
http://www.bigtrucker.co.uk/images/GPRS/display_9.JPG
Access Point Name: wap.o2.co.uk
Next
http://www.bigtrucker.co.uk/images/GPRS/display_10.JPG
User Name: user
Password: password
Finish
Screens Grabbed With Pocket Screen Capture 1.0 (http://www.pocketpccity.com/software/pocketpc/Pocket-Screen-Capture-2002-3-2-ce-pocketpc.html)
kbantikos
19-04-2006, 09:49 AM
i have look and look over and over again but i cant figure out what is the best rom for my alpine (qtek 2020i).
i have this rom from vodafone
ROM VERSION 1.11.00 WWE
Radio vers. 1.03.00
extROM vers. 1.11.142 wwe
Which rom do you advise me to put in it? i am not using it as a phone only as
a pda and destinator
Thank you very much
GreenRabbit
25-04-2006, 03:01 PM
http://www.bigtrucker.co.uk/images/GPRS/display_5.JPG
sorry MaskedMarauder, i wanna know the name of the writing program that i see into the picture??
Thanks
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.