PDA

View Full Version : Unable to boot after upgrade to WM2005


nemchua
29-09-2005, 03:36 PM
I have followed instructions on the wiki until step 11 (after upgrade rom process). Then step 11 says:
"Press Power + Softreset, and when the colored stripes (well, this is the bootscreen :) )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
"

My O2XDAIIs shows 4 color stripes (blue, green, red and white) but I did press Record+Camera or Power+Softreset+Camera+Record at the same time hundreds times but nothing happen :(. If i press 4 buttons at the same time, my O2 shows "Serial" text. Now I stuck at here and my O2 turned to an useless box. Please help!!

qsd
29-09-2005, 09:37 PM
Change ROM to 1.8

efjay
29-09-2005, 10:56 PM
nemchua make sure you press and hold Softreset+Camera+Record for a few seconds rather than just press and release.

racingclub
18-10-2005, 03:15 PM
i'm stuck here as well - & ive also literally tried lots of times!! help!

joey jojo
18-10-2005, 04:36 PM
nemchua make sure you press and hold Softreset+Camera+Record for a few seconds rather than just press and release.

this works, have you tried that ?????

racingclub
18-10-2005, 04:48 PM
lol - of course!!! :)

but no banana..........

im using a UK T-Mobile MDA3 (unlocked) if that makes any diff...

pimbo
18-10-2005, 07:04 PM
My O2XDAIIs shows 4 color stripes (blue, green, red and white) but I did press Record+Camera or Power+Softreset+Camera+Record at the same time hundreds times but nothing happen :(. If i press 4 buttons at the same time, my O2 shows "Serial" text. Now I stuck at here and my O2 turned to an useless box. Please help!!

This is the bootloader, when you see "serial", you should plug it on to your computer.
so you should not be here.

You should make the hard reset like in wm2003,
Now before the rom version shows up! you must press record and camera. and hold them pressed. till the screen shows up.

if you can do that within a second, (do some exercieces with it), because our hands are to lump to do this the first time. :D

racingclub
19-10-2005, 03:56 PM
nope - as stated - have really honestly tried this - & it doesnt happen!

racingclub
28-10-2005, 04:15 PM
got this working on my BA after all your helpful advice lol

flashed the 1.40 imate rom on first - then WM5.

I could then proceed with the old button presses.

(However, didnt really like WM5 so downgraded almost straight away ;) )

gothier
28-10-2005, 09:31 PM
Try to downgrade using this ROM file:

http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5

then upgrade again. worked for me. had the same prob.