Anyone know how to hard reset the Wizard?

[far182]

Lets say its crashing on boot. What is the key combination to hard reset it?

[wardy]

Hold the comm manager buton and the voice command button at the same time.

While holding these push the soft reset button. Keep your fingers on the Comm and voice Manager buton. After about five seconds a screen will appear asking you to press the green send button.

That's it.

[wardy]

Hold the comm manager buton and the voice command button at the same time.

While holding these push the soft reset button. Keep your fingers on the Comm and voice Manager buton. After about five seconds a screen will appear asking you to press the green send button.

That's it.

[psneddon]

My wizard froze on reset after i installed pocketplus 3 - has to use the hard reset method mentioned above, works a treat.

Paul

[q-biq]

mine froze to after pocketplus 3.. verry wierd :(

[IamGuest]

mine froze to after pocketplus 3.. verry wierd :(

Disable "safe mode" function before soft reset.

[DocteurN]

Yes mine froze to after pocketplus 3.0.0.3888 too but not with 3.0.0.3652 :D

How do you disable "safe mode" function before soft reset. ? :idea:

Thanks

[aliendad]

go into "setting" and then icon Spb Pocket Plus, and bottem feature on menu is safe mode, un-tick it.

[DocteurN]

Ah ok thanks :wink:

[mouradhabib]

press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen

[magicbbird]

Yes mine froze to after pocketplus 3.0.0.3888 too but not with 3.0.0.3652 :D

How do you disable "safe mode" function before soft reset. ? :idea:

Thanks

Get PPlus 3.0.4, works very good.

[mix]

press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen

Update: on my I-Mate K-Jam (ITA) I was not able to perform any HARD RESET with keys.... (screen never going black, not after minutes !!!).

I had to use an util provided with the K-Jam "reset memory", which asked me to type 1234 and the confirm before performing...

Just my 2 cents...

Ciao

[zfarkas]

Hold the buttons, and press reset for a short time. Still hold the buttons, and press talk when asked.

[stuhyde]

ok heart attack over.

:lol:

[topps]

press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen

Update: on my I-Mate K-Jam (ITA) I was not able to perform any HARD RESET with keys.... (screen never going black, not after minutes !!!).

I had to use an util provided with the K-Jam "reset memory", which asked me to type 1234 and the confirm before performing...



I have the same problem. I disabled PocketPlus Safe Mode...but still cannot do a hard reset. Where is the utility that you mentioned? I cannot find it on my device.

[topps]

press common manager, voivespeed dial and camera buttons togeather ....do soft reset while pressing don't leave till screen is black...then follow instructions on screen

Update: on my I-Mate K-Jam (ITA) I was not able to perform any HARD RESET with keys.... (screen never going black, not after minutes !!!).

I had to use an util provided with the K-Jam "reset memory", which asked me to type 1234 and the confirm before performing...



I have the same problem. I disabled PocketPlus Safe Mode...but still cannot do a hard reset. Where is the utility that you mentioned? I cannot find it on my device.

Ah, found it. Start | Settings | System | Clear Memory... thanks.

[thgrasu]

This forum rocks
Passed closley to heart attack after crash on boot.
Thanks

[vijay555]

VJEschaton will hard reset a wizard...

V

[Eagleman71]

For newbies like me i push up again this thread.

Again, there are two methods available to perform a hard reset of your HTC Wizard. The first method is the easiest, but seems to be the least known method:

* Open the Start menu
* Select Settings
* Select the tab System
* Select Clear Storage
* You will now be prompted with a warning about the consequences of a hard reset, and will be asked to copy a word into a form and to confirm by pressing the left Soft Button

The first method is only availalbe when your HTC Wizard is functioning correctly. If that is not the case, a second method using only hardware buttons is available:

* Press and hold both the Comm Mannager Button and the Voice Command Button
* While keeping those two buttons pressed, press the Reset Button with your stylus
* After about a second you will be prompted for confirmation. Press the Talk Button to confirm

This method is tested and works on Qtek 9100, I-mate K-JAM, MDA Vario, Orange SPV M3000, O2 XDA Mini S, Dopod 838, Cingular 8125.


[fond this around the net]

bye
Diego

[jahuso]

Thanks a lot man :)

[tigrisimo]

For newbies like me i push up again this thread.

Again, there are two methods available to perform a hard reset of your HTC Wizard. The first method is the easiest, but seems to be the least known method:

* Open the Start menu
* Select Settings
* Select the tab System
* Select Clear Storage
* You will now be prompted with a warning about the consequences of a hard reset, and will be asked to copy a word into a form and to confirm by pressing the left Soft Button

The first method is only availalbe when your HTC Wizard is functioning correctly. If that is not the case, a second method using only hardware buttons is available:

* Press and hold both the Comm Mannager Button and the Voice Command Button
* While keeping those two buttons pressed, press the Reset Button with your stylus
* After about a second you will be prompted for confirmation. Press the Talk Button to confirm

This method is tested and works on Qtek 9100, I-mate K-JAM, MDA Vario, Orange SPV M3000, O2 XDA Mini S, Dopod 838, Cingular 8125.


[fond this around the net]

bye
Diego

by the way if you push the camera button, and hold on for some secs, use the REEBOT/styulus button and......
you get the same result:cool: