pietro
21-10-2005, 01:33 PM
dear ladies and gents,
i am new to this forum; i have been using my xda2 for 2 years now and i am more or less up to speed on the how to's. but i have a question on upgrading to wm2005. i deeply apologize if this topic has been discussed before and now here i am again bringing it up...but hear me out first.
i have downloaded ALL the files needed to upgrade to wm2005; the roms (version c) from buzz.net, the ramdisk, doctools, even the skins. so far i know only the following steps (i got this from xda2jojo's downloads). everything.
--------------------
5. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
7. Run HimaUpgradeUt.exe
8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
9. Detach your device from the cradle.
10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
-----------------------
i have successfully done this already but the storage is low. i have done reading and browsing on expanding the storage to 30-plus mb using ramdisk and the doctools. i would like to ask for assistance on how to use these. i read in this forum that you have to use doctools first? it is a little confussing.
please advise how to use these 2 tools together with the steps mentioned above.
again i apologize in advance because i know that this topic has been discussed so much.
pietro
i am new to this forum; i have been using my xda2 for 2 years now and i am more or less up to speed on the how to's. but i have a question on upgrading to wm2005. i deeply apologize if this topic has been discussed before and now here i am again bringing it up...but hear me out first.
i have downloaded ALL the files needed to upgrade to wm2005; the roms (version c) from buzz.net, the ramdisk, doctools, even the skins. so far i know only the following steps (i got this from xda2jojo's downloads). everything.
--------------------
5. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
7. Run HimaUpgradeUt.exe
8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
9. Detach your device from the cradle.
10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
-----------------------
i have successfully done this already but the storage is low. i have done reading and browsing on expanding the storage to 30-plus mb using ramdisk and the doctools. i would like to ask for assistance on how to use these. i read in this forum that you have to use doctools first? it is a little confussing.
please advise how to use these 2 tools together with the steps mentioned above.
again i apologize in advance because i know that this topic has been discussed so much.
pietro