NO SIGNAL

[soleed]

hi im using Qtek 1010 and she do not get any signal and i did use the http://lumpistefan.dyndns.org/ to flash the rom i have every think look good but still i cant have signal and im in Lebanon so please can some one provide me some help

[LumpiStefan]

What Device model do you have (check rear sticker)?
Which ROM version have you installed?
Which Radio Stack version installed?
What frequency do your provider use?

Stefan

[soleed]

HI IM USING QTEK 1010 and im beginer in this so al that i know that i just coke the ROM and im in lebanon the frequency here i think its 900/1800

[LumpiStefan]

HI IM USING QTEK 1010 and im beginer in this so al that i know that i just coke the ROM and im in lebanon the frequency here i think its 900/1800

Not many answesr to my questions.....

What Device model do you have (check rear sticker)? PW10A, PW10B .....
Which ROM version have you installed? Is shown on bootup or in the system itself.... Could be 3.xx.xx or 4.xx.xx
Which Radio Stack version installed? is also shown on boot up and in the system itself....


Stefan

[soleed]

HI IM USING QTEK 1010 and im beginer in this so al that i know that i just coke the ROM and im in lebanon the frequency here i think its 900/1800

Not many answesr to my questions.....

What Device model do you have (check rear sticker)? PW10A, PW10B .....
Which ROM version have you installed? Is shown on bootup or in the system itself.... Could be 3.xx.xx or 4.xx.xx
Which Radio Stack version installed? is also shown on boot up and in the system itself....


Stefan


ROM : 4.01.16
RADIO: 6.14
MODEL :PW10A

[LumpiStefan]

ROM : 4.01.16
RADIO: 6.14
MODEL :PW10A

That's curious. PW10A-models are for 900/1800 MHz and the Radio Stack 6.14 is for PW10B-models and 900/1900. Are you sure, that it is a PW10A model?

If you search manauly for a network, do you get any network?

Stefan

[soleed]

ROM : 4.01.16
RADIO: 6.14
MODEL :PW10A

That's curious. PW10A-models are for 900/1800 MHz and the Radio Stack 6.14 is for PW10B-models and 900/1900. Are you sure, that it is a PW10A model?

If you search manauly for a network, do you get any network?

Stefan

NO I DONT have any network if i search it manualy

[LumpiStefan]

You could try setting your band frequency manually.

Enter bootloader by holding Power button and doing a soft reset (PAy Attention, that's like a hard reset. All data on your device will get lost....)

Now pressing the right button, with the little calendar printed on it (called App1 by the device). Now the device displays:


UTILITIES
=============
DEBUG/CALI.
GSM TURN ON
GSM TURN OFF
GSM RESET
GSM 900
GSM 1900
GSM 900/1800
GSM RFCAL
GSM NORMAL


Select the correct frequency, depending on your model.

Make a soft reset to exit bootloader....


Stefan

[Rudegar]

maybe you should make a bigger warrning in your kitchen :lol:

about 900/1900 and 900/1800 radiostack picking

[LumpiStefan]

maybe you should make a bigger warrning in your kitchen :lol:
about 900/1900 and 900/1800 radiostack picking

But Radiostack is independent of the ROM....

So, what would you suggest to write as warning?


Stefan

[soleed]

You could try setting your band frequency manually.

Enter bootloader by holding Power button and doing a soft reset (PAy Attention, that's like a hard reset. All data on your device will get lost....)

Now pressing the right button, with the little calendar printed on it (called App1 by the device). Now the device displays:


UTILITIES
=============
DEBUG/CALI.
GSM TURN ON
GSM TURN OFF
GSM RESET
GSM 900
GSM 1900
GSM 900/1800
GSM RFCAL
GSM NORMAL


Select the correct frequency, depending on your model.

Make a soft reset to exit bootloader....


Stefan


SHE DID NOT WORK MAN SHE DID NOT ENTER TO THE BOOT LOADER