Smart Dial for Wizard???

[mikokwan]

I just got my new Wizard (Dopod838@Chinese).
As I used Magician (O2Mini@WWE) before, there is a smart dial option for the phone.
I can make a call with "ONE Finger" but in my Wizard..I have to scroll all contacts to make a call.
Is Smart Dial option available in others e.g. Qtek, i-Mate...etc?
Can please help to extract this for me???

Many thanks

[dalamario]

If you go in the ftp under uploads\kjam you can find the extended rom of this device (imate kjam) that support smart dialing. Inside the extended rom there is a file named Default_SmartDialing_enable_0915_signed.cab. Perhaps this help you.

[mikokwan]

thanks

BTW, what's the username and password for login ftp.xda-developers.com?

[mikokwan]

Or....would anyone can help to extract the files for me?

Thanks!!!!!!!!!!!!

[nmx77]

Copy the files to your ppc and run then from within the ppc exporer,
then it will be installed, you don't need to extract anything.

[wardy]

I will send you the files tonight ;o)

[mikokwan]

Thanks guys!!!

[mikokwan]

I final got the files "Default_SmartDialing_enable_0915_signed.CAB" and install into my Wizard Chinese Version.

But there are no different and no way to enable SmartDialing.

Would anyone can have a screen capture on it or show me how to enable it.

I still need to search thru the whole contact to start a call.

Thanks

[pfc]

Could you please post the file cause i have the same problem on my i-mate k-jam

Thanks

[dalamario]

If you have a KJAM you already have smart dial.

To enable smart dial you have to open the dialer (press green button) and then press right softkey to open the menu, the bottom selection is SMART DIALING OPTIONS that enable/disable the function.

[mikokwan]

Here is the smartdialing cab...I have installed in chinese Dopod 838 (K-Jam) and no effect

[mikokwan]

I just think the files seems too small...do anyone know is it enough for installing SmartDialing????

[TseLawrence]

Hey, I'm also using Dopod838 Chinese... The quick dial is enabled by default... no need to do anything in addition. When you're in the phone applet, press your right softkey and select "快速撥號 (I)" can setup speed dial numbers. 8)

[CL55]

He's refering to Smart Dialing, not Speed Dial Tse... The file size is correct miko... How did you install it? Did you copy the cab file to your storage card or whatever and run it from there?

One thing I missed, is the O2 Dial Wizard on my IIs.. It let you edit the number before dialing and set carding card prefix etc.. Too bad it doesn't seem to work on WM5 or my Exec :(

[Grill Oven]

I recommend on using Phoneplus which I realized is suitable for WM5.

[milklok]

I have tried the CAB file and it is not working, too.

Anyone successfully run Smart Dialing on Dopod 838? I miss this application very much! :roll:

[milklok]

I found the CAB file actually only activate the smart dialing, which does not contain any program file. The program files should already installed in the K-Jam default ROM.

So I think the smart dialing will be able to run in Dopod 838 by copying the following files from K-Jam devices:
- \windows\phcanhtc.dll
- DPadMenu.dll

Anyone can help? :wink:

[Vincentfung]

This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.

[milklok]

Thanks Vincentfung for the file. :wink:

I have tried to install the cab. However it doesn't work nor have any change to the dialer. I think it is for WM2003SE. So... we need the WM5 version of Smart Dialing that found in English K-Jam or English Dopod 838, or maybe Universal...

[nmx77]

This one is on my device, and it should work ?

qtek9100 / Vario

[milklok]

Dear nmx77, Thanks for the CAB file. It doesn't work either.

I found that the actual file are locate at the ROM of Wizard. Would you dump the following files from your Wizard? These files are referred by the registry setting in the CAB file you provided.
- \windows\phcanhtc.dll
- DPadMenu.dll

Thanks a lot. I missed smart dialing very much.
:wink:

[nmx77]

Hi Milklok,

i attached a rar with the following files:

dpadctl.mid
dpadmenu.dll
phcanhtc.dll
phcanoverbmp.dll
phcanrc.dll
phcanrc.dll.0413.mui

i attached the others only because of the same name, so it might
save asking again if it doesn't work ;)

i hope this can help you (and others)

[milklok]

Thanks again nmx77. Still no luck... Looks like we need a full dump of rom files plus full registry of Wizard.

If anyone have time, please use ssnap or other tools to dump the complete registry. And also upload the Wizard files (especially at \Windows) to ftp.xda-developers.com. I know it's a bit difficult but your help is much appriciated. 8)

Many thanks. Still desperate for the smart dialing. :twisted:

[mikokwan]

milklok....do you know the CAB name in Rom?

[milklok]

milklok....do you know the CAB name in Rom?

I think there is no smart dialing CAB in ROM. The smart dialing is already "installed" or located in ROM by default. That's why I need a full dump of all files in the Wizard, or at least all files from \Windows folder. So that I can try the files. Of coz registry setting is also required.

Does anybody else have any other idea to enable the smart dialing? :?:

[mikokwan]

does anyone help?

[timpda]

This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.

Do you have Smartdialing program for XDA2s? can you share it with me?
thanks a lot

[mwilmar]

Does anyone have this smart dial...??? :?: :cry:
It's like working on WM5...

http://buzzdev.net/components/com_simpleboard/uploaded/images/pc_capture4.jpg

[wolwol]

great....
mine's an imate k-jam, hard reset it, before it install everything i've soft reset it, voila, more memory for me...and...well installed the smart dialling *75kb* and its back :D