View Full Version : MDA Compact II unlocking
obliv10us
8th December 2005, 05:09 PM
hi folks, thanks in advance ,
i bought a mda compact , an sucessfully unlocked it with software from your ftp...ty.... So i upgraded this morning to a MDA Compact II, model no. pm200 and tried to unlock with the same tool , and it says device not recognised pm200.
i know its running windows mobile 5, any help to free the simlock would be greatfully recieved , all the best , oblivious. :lol: :twisted:
shoptillyadrop
28th December 2005, 12:25 PM
Hello,
go to http://forum.xda-developers.com/viewtopic.php?t=33796&highlight=lokiwiz
Download lokiwiz.zip - HTC Wizard Unlocker v0.1
VERSION 0.1 !!!!!
follow these instructions:
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Charmer / PM200
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via ActiveSync with the computer
5 - Execute lokiwiz.bat and follow the instructions on your screen...
I've just unlocked my MDA Compact II with it, and it works.
Regards.
rliver73
4th January 2006, 12:40 AM
Just wanted to confirm that i've had sucess unlocking my mda compact II (htc charmer). Followed shoptillyadrop instuctions and they worked a treat. Thanks for help.
Only, one comment to your instuctions - line 2 you wrote wizard rather than charmer.
Thanks again.
Nase007
26th January 2006, 12:40 AM
Will the SIM Lock be restored after I have performed a hard reset?
Thanks
Nase
shoptillyadrop
26th January 2006, 01:12 AM
No,
the Phone will remain unlocked. If you want to re-lock your phone, the same tool will do the job.
Regards.
Nase007
26th January 2006, 08:46 AM
Thanks for your quick reply.
The procedure sounds very easy so I will give it a try this evening.
Thanks
Nase
melino
26th January 2006, 10:15 AM
You are talking about NETlock, not SIMlock for a specific number (Prepaid), right?
I want to buy a MDAc2 from T-Mobile but have to use it with o2.
Nase007
26th January 2006, 12:01 PM
You are talking about NETlock, not SIMlock for a specific number (Prepaid), right?
I want to buy a MDAc2 from T-Mobile but have to use it with o2.
Yes that is what I would like to do.
I guess that the Unlocker will remove any lock. Am I right?
Thanks
Nase
MADJID
23rd March 2006, 10:48 PM
work fine for me thank you :lol: :lol: :lol: :lol: :lol:
aTaRi64
24th March 2006, 03:11 PM
Has someone successfully unlocked (sim & Net) the t-Mobile German Compact 2 with a Tool?
ASHFLASH2006
23rd July 2006, 12:11 PM
HAVE USED LOKIWIZ VERSION 1 ,WELL HAVE USED THEM ALL WITHOUT SUCCESS ITS DRIVING ME MAD :( PLEASE SOMEONE HELP
GET''AN ERROR OCCURRED MESSAGE
THANKS
hanmin
23rd July 2006, 02:43 PM
I've done it without problem. You list out your procedure done to see if we can help.
akaliszczuk
24th July 2006, 03:02 PM
Hello. I had problem with my Mda Compact II T-Mobile UK. After I input Pin ti told that: Data Crashed conntact Your Service. I went to imei-check.co.uk and payed 20 GBP and in 5 minutes my Mda Works as a new one. Its the best way to solve this problem and problem with simlock too. Best regards !!!
hanmin
24th July 2006, 03:13 PM
A lot of people have unlocked their Charmer with out any problem. And there are at least two (including myself) who has flashed the Charmer ROM as well. Good if you can list out your specification and procedure that you have used that messed up your Charmer.
Usually, when you have the error message "Data Crashed conntact Your Service Provider", it means that the IMEI area has been messed up. And, the only solution to this problem seem to be to go to the imei-check.co.uk
JEFF4507
16th August 2006, 11:11 PM
Hey guys.
I have just got a Tmobile MDA Compact 2.
I cannot unlock it though.
I have tried V0.1 and V0.2b.
When my simcard (O2) is in the phone, it just asks you to enter the unlock code, and won't let you access any menus.
So I remove the SIM, install the EnableRapi.cab and then insert the Sim card. And click lokiwiz.bat on the PC whilst Activesync is running, I select U (have tried C aswell on V0.2b) and it doesn't show any errors, the phone resets, but the lock is still present.
Does anyone have any ideas ???
vibe1010
16th August 2006, 11:41 PM
Hi Guys!
I have followed the instructions carefully und copied the file EnableRapi.cab to my charmer, executed it there, made sure that Charmer is connected via ActiveSync, opened the file lokiwiz.bat on my PC, and waited until Charmer rebooted!
After reboot I inserted my SIM Card and the Result was a window that asked me after typing in my PIN for a Network Code!
I have tried all the Versions on the Unlock page, none worked! I have deactivated my AntiVirus Programms and Firewalls!
My Charmer is (still) locked from T-Mobile Austria! All I receive on my PC in the same Folder is an Output File called "Unlocked" which I cannot open with a program on my PC!
Thank you very much in advance for your help as otherwise I have to unlock it via Internet and this would cost me 30 BP!
;-)
Vibe
dave106
17th August 2006, 12:03 AM
lokiwiz probably wont work on AKU2 roms because the OS is more protected. check your versions, Windows Build 14847.2.0.0 is AKU2.
homerjay
17th August 2006, 01:32 PM
lokiwiz probably wont work on AKU2 roms because the OS is more protected. check your versions, Windows Build 14847.2.0.0 is AKU2.
that's exactly my version too...
can you keep me updated if there is a version that can unlock this type ?
thx !
roltex
12th November 2006, 08:56 AM
Look what abzee wrote on: http://forum.xda-developers.com/showthread.php?p=1039958&highlight=could+not+update+itsutils.dll#post103995 8
it took me 5 minutes to remove the lock using his instructions.
Thanks to abzee and of course to machinagod.
sixpack
14th January 2007, 05:50 PM
I used Lokiwiz03 yesterday with my Charmer. The Charmer is the german MDA Compact II with T-Mobile Netlock. It takes only some minutes. It was very easy to use-no problems.
Great Work and a very great thank you!
mark_dianne
9th February 2007, 02:36 AM
Hi everyone,
Not only am I new to this website but I am also very new to technology ( A bit dim some would say... !) and I want to unlock my MDA Compact II. The problem I am having is I need an "Idiot's guide" rather than the steps put on here. I know this sounds lame but I just don't get it!
I've managed to copy the zip folder onto my desktop. I can synchronise my phone to my pc but anything more is double dutch to me. Would any kind soul out there take the time to give me the instructions in the simplest terms to allow me to unlock my handset which is currently locked to T-Mobile.
I'm sure by using this handset I'll gain a better understanding of the technology but right now I've never felt so thick!
Please help....
Desperate Dianne (aka mark_dianne)
Thanks:confused:
gothier
10th March 2007, 07:58 AM
I just unlocked a german T-Mobile MDA compact II for a frind.
No probs at all!
Thanks a lot!
skedone
13th March 2007, 08:43 PM
hi guys i just got a mda compact 2 on t-mobile can u tell me how to tell what version lokiwizard03a supports its a t-mobile one buy the way also how do i get the version number up also can the unlock software damage the phone in anyway coz if it can i will just buy jaffWM
skedone
14th March 2007, 01:22 PM
anyone please??
Lesage UK
15th March 2007, 03:00 PM
I tried SIM unlock on a MDA C II with the latest (version 2) ROM update & it didnt work
I wonder if its the v2 ROM etc update that renders the unlock business inoperative?
hanmin
15th March 2007, 03:26 PM
I tried SIM unlock on a MDA C II with the latest (version 2) ROM update & it didnt work
I wonder if its the v2 ROM etc update that renders the unlock business inoperative?
hi guys i just got a mda compact 2 on t-mobile can u tell me how to tell what version lokiwizard03a supports its a t-mobile one buy the way also how do i get the version number up also can the unlock software damage the phone in anyway coz if it can i will just buy jaffWM
lokiwiz latest version (3 or 0.3b, can't remember) works on the currently (Mar'07) latest ROM (they have only released ONE ROM update after MDA Compact 2 launched) from T-Mobile Uk. I've done that myself.
Lesage UK
16th March 2007, 06:26 PM
Thanks for that skedone
I was using lokiwiz 2b so will try 3 and report back
Lesage UK
16th March 2007, 07:27 PM
YES!! LOVELY!! lokiwiz3a worked a treat!! Thanks for nudging me in the rite direction
Lesage UK
16th March 2007, 07:29 PM
OOps. I attributed the nudge to skedone. I meant to name hanmin
Sorry hanmin and thank you
skedone
16th March 2007, 08:05 PM
no worrys lol now i have a new problem i can charge my phone but not connect to my pc lol i plug in my 5 pin miniusb lead and nutting not even detected the other one i have starts charging the phone lol any ideas guys?
skedone
19th March 2007, 06:43 PM
not to worry fixed it my self (hot air rework stations are great) also bluetooth seems to work lol
JC_BY
7th April 2007, 07:29 PM
Hi all! I have a problem whith unlock Charmer T Mobile MDA. It has SPL 2.06.0000 OS 2.6.2.27
I tried with Lokiwiz03a - it read the unlock code but the gadget didn't accept it.
Any ideas?
frittun
9th May 2007, 05:55 PM
hi, i just sucessfully unlocked my german t-mobile mda compact II with lokiwiz02b without an problems. thanks
simplyme81
23rd August 2007, 01:15 AM
i bought two used phones from ebay, and I thought I had unlocked them first, but now that I'm in Europe, It doesn't work with any other sim cards. I'm desperately trying to get them unlocked. i've used all lokiwiz versions and with the first one when i type in the letter U (for unlock) it quits the whole screen. and lokiwiz3 tells me that it can't find the path. I'm desperate to get it done asap.
my phone is t-mobile mda usa based
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
ANY help will be appreciated.
thx a bunch
vlodeck
23rd August 2007, 01:28 AM
Have you enabled rapi first? I mean, there should be a letter in lokiwiz to do that.
simplyme81
23rd August 2007, 01:40 AM
everytime i try to download that, and i click on rapi.cab, the whole screen disappears. i've tried it numerous time but no luck. don't know what to do
timg123
9th September 2007, 01:10 PM
Hi I Downloaded Lokiwiz And Did What It Said But It Is Still Asking For An Unlock Code And Says Network Locked Any Ideas Please Thanks A Lot
milagro
24th November 2007, 05:44 PM
Hi, many thanks to Ricardo Afonso, just unlocked my german MDA II (HTC PM200) as smoothly as possible by lokiwiz02b:). Software just worked fine.
james68
31st January 2008, 01:06 PM
Hi Guys
any ideas on how I go about unlocking my vodafone sim?
thanks in advance
cluelessrus
13th February 2008, 02:42 PM
Help! I have read this thread but only after I read the general unlock thread http://forum.xda-developers.com/showthread.php?t=240784 with its link to universal unlock tool http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
It says:
If you haven't already, you may want to consider upgrading your bootloader first, while the original radio ROM is still intact.
I dont understand this at all but started the bootloader procedure. It is on my computer but doesn't appear to be on my phone.
What shall I do next?
mkwatis
8th February 2009, 11:02 AM
@shoptillyadrop;
I make the settings now it sync and i use ALL HTC tool with HTC ELF as followed,
1. Connect your Phone and establish Activesync Connection.
2. Install 'Cert_SPCS.cab' and 'EnableRapi.cab' on your device.( Copy them to your devide
and run).
3. Run 'Touch_Unlock.exe'.
4. The eight-character code is your Unlock code.
since it was eight time mistaken ,i wait for some hours then i enter codes and PM200 was sucsecifully unlocked
vBulletin® v3.8.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.