PDA

View Full Version : Trying to Upgrade ( Flash ) and now I am stuck in Bootloader


brosen
04-01-2006, 02:01 AM
I tried the Upgrade, but it did never start, so when I tried to get it back to normal, doing a reset, I only get the Bootloader screen, with the USB and v0.60, I tried a Soft and Hard Reset but nonthing, I have tired to re-flash it again, but also nothing, please any help, thanks

brosen
04-01-2006, 02:30 AM
ERROR 101 : CONNECTION ERROR

PLEASE ANY ADVICE IS WELCOME, THANKS

brosen
04-01-2006, 03:10 AM
PLEASE HELP

steiale
04-01-2006, 09:13 AM
latest ActiveSync installed? Removed battery?

Ruud Westerhout
04-01-2006, 10:13 AM
Had this issue Yesterday. Even if You update the ROM, You will still stay in bootloader (for me it was like this). Do another update, this time only the radio (so delete ms_.nbf and nk.nbf from the directory from where You run your upgrade utility). After this (another 20 minutes) You should be able to have result after the cold-reset.
On the bootloader there is a small difference. Upgrading the ROM shows how far he actually is (in percentage), whilst upgrading Radio it does not show You the percentage, only that he is busy.

Ruud

Teja
06-01-2006, 03:32 PM
Just try the update without any insert card (sd and sim), and a wonder will happen!
Teja

BetoX
06-01-2006, 05:04 PM
- connect the JASJAR with your PC using the USB cable. Activesync will NOT start and the XP says does recognize it
- do a HardReset (press the 2 (-) in the keyboard and softrest it all at the same time. Hardreset screen appears (DON'T press 0 or X..)
- start the update program. Please use a good upgrade like the latest from imate ftp://ftp.clubimate.com/JASJAR_WWE_11353_137_10301.zip
- start the update and when it's looking to check the version of the JASJAR softreset it

It should start to reflash it without problems.

I hope it helps...