PDA

View Full Version : O2 wireless internet connexion please help


njulia
21-01-2006, 07:17 PM
Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?

bartman
22-01-2006, 08:58 AM
go "setting>connection>network card"
and setup a card for your router.

njulia
22-01-2006, 05:03 PM
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards

configure wireless network page
belkin 54g connected
networks toaccess
all available

network adapters page
my network card connects to
work

tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver

is this ok?

i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g

this is what it shows
General
network name belkin 54g
connects to work

Network key
authentification open
data encryption wep
the key is provided for me automatically

802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP


bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD

SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED

LEAP
SSID AUTHENTIFICATION TYPE

BLANK BLANK

IS THIS NORMAL?? SHOULD'n it show

belkin 54g??

when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found

thanks for your help..

wytey
23-01-2006, 01:31 AM
Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure

Leap is blank for me too.

some setting differences betweens yours and mine

neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.

mine is set to connect to 'The Internet'

the key is provided for me automatically is unchecked, I manually typed it in with the key index.

use Ieee 802.1x is unchecked

check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.

looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.

njulia
29-01-2006, 03:18 PM
Thaks a lot, your configuration works perfectly.
Kisses :D