Firmware upload crash

[JohnnyFive]

Hi all,

I hope anyone can help me on this. I downloaded the
new firmware from the UK T-Mobile site for a SDA-II phone and
installed it. During the install my wonderful :P XP system stopped
showing off a BSOD... (blue screen of death)

So the upload to the phone was interrupted. If I try now to switch on the phone nothing happens.

Problem is I also used the sw to remove the simlock already, so I suppose I cannot go back to t-mobile for a repair.

Is there any way to get the firmware back into the phone correctly ?
I know there should be a way using an In System Programmer, ISP
Has anyone experience with this problem ?

[heliosfa]

this has been experienced many times, with many posts on it.

Try getting the device into bootloader mode (not sure of the key combination for the hurricane) and you should be able to reflash it through windows.

[MZ]

I have the same problem and don't know how to backup my previous ROM, did any one experience about that, please tell us.

[animelover]

Th eeasiest method is:

- Disable the USB-Connection in the settings of desktop AS
- press and hold the camera-button
- connect the SDA II with the USB-cable
- after a view seconds appears a three-coloured display, you're now in the bootloader
- you can now stopp pressing the camera-button 8)



If you cann access the bootloader, your phone isn't allready death! You can flash an image from the MiniSD!

[harwooda]

Hi All,

I have an SDA II which suffered a failed ROM update as described above. Unfortunately I am unable to get the bootloader screen to display using the technique described above.

Has anybody got advice as to where I can get the phones software reloaded and everything back up and running again.

PS I have made extensive unsuccessful use of the search feature before posting.

Any help very much appreciated.

BR

Andy

[ludatrick]

Th eeasiest method is:

- Disable the USB-Connection in the settings of desktop AS
- press and hold the camera-button
- connect the SDA II with the USB-cable
- after a view seconds appears a three-coloured display, you're now in the bootloader
- you can now stopp pressing the camera-button 8)



If you cann access the bootloader, your phone isn't allready death! You can flash an image from the MiniSD!

I got the same problem, tried to upgrade it to a german rom then it crashed, i cannot access the bootloader mode, and u talked about flashing from the minisd, if u could provide more explaination it would helpful