Finally TI OMAP Overclock tools

[klikman]

I hv come across this overclock utility for TI OMAP, OmapClock 0.2

I have tried it on DOPOD 818, overclock up to 240MHz, runs without problem. Opening SMS dan File Explorer is now alot faster.

Anyone with TI OMAP processor should have this !!!!
It should run on Smartphone too.

[ZeBoxx]

main thread:
http://forum.xda-developers.com/viewtopic.php?t=40284

[popcity]

Great find...thanks... :D

[pcdoc]

Works brilliantly. Thanks

[mackaby007]

I'm equally impressed by the speed gains of this little program, but am somewhat concerned about other potential side-effects; like frying the CPU!! :?
Anyway, I'm using 'batti' to keep a close look on the temperature. It's qite a handy little tool.
http://pda.jasnapaka.com/batti/

Please let us all know how you get on with this program over time. :)

P.S. Does anybody know what temperature should NOT be exceeded by this CPU? Mine is currently at 30 degrees and it was at 24 when I started using the overclocker.

[tintoy]

Correct me if i'm worng but the batti app looks like it shows battery temp, not cpu temp? (prehaps your battery temp ahs gone up because you've been holding your pda ;-p)

[mackaby007]

Correct me if i'm worng but the batti app looks like it shows battery temp, not cpu temp? (prehaps your battery temp ahs gone up because you've been holding your pda ;-p)

Your absolutely right!! :oops:
Thanks for bringing my attention to this very important point. :wink:

Anyone know of an application that accurately shows the CPU temperature? :lol:

[minhbu_sg]

when i run in 300MHz which Mini S, it will hard reset.. I don't know why

[peter_altherr]

hi minhbu_sg,

when i drive a 90° curve with my car at 100 miles per hour i always have to leave the road :-) just kidding. the reason for hard reset is just of physical nature. you have exceeded the limits of your built-in omap cpu. at 300mhz it does something but not what it is supposed to do. same thing when you have, let's say, a glass of whisky. having one glass of whisky does slightly influence your cpu (brain) and everything you are trying to do is a little bit easier (at least you feel so) but having a bottle of whisky drives you doing things you don't want to do at all.

so keep overclocking you omap moderately and you get the best benefit out of it.


regards

peter

[Bipin saspara]

hi

i install this software and i put my device clock to 300 and it stop working.
i try soft reset but it didn't start. and i try to hard reset it also didn't go
please help what should i do.


thanking you in advanced

when i drive a 90° curve with my car at 100 miles per hour i always have to leave the road :-) just kidding. the reason for hard reset is just of physical nature. you have exceeded the limits of your built-in omap cpu. at 300mhz it does something but not what it is supposed to do. same thing when you have, let's say, a glass of whisky. having one glass of whisky does slightly influence your cpu (brain) and everything you are trying to do is a little bit easier (at least you feel so) but having a bottle of whisky drives you doing things you don't want to do at all.

so keep overclocking you omap moderately and you get the best benefit out of it.


regards

peter[/quote]

[majdi]

i installed this on my kjam and worked great with noticeable speed boost, BUT....
when i suspend the kjam, and open it again, the speed goes back to the defauls 180.

is this normal? or something has to be done to enable the speed i choose until the next soft reset at least?

[ZeBoxx]

Yes, it's normal - and yes, you would have to use some manner of application to re-start the overclock after a suspend. See also the original thread: http://forum.xda-developers.com/viewtopic.php?t=40284

[Kanjibankers]

Can somebody tell me how to run this program. Im pretty new to all of this and not sure where to install on my qtek s200 and how to run it.

Thanks!

[505]

Can somebody tell me how to run this program. Im pretty new to all of this and not sure where to install on my qtek s200 and how to run it.

Thanks! U device (Qtek s200) is a HTC Magican. This forum is about HTC Wizard. Try to look in Magican forum.

People! When wizard is in suspend it runs on 180 mhz? Can we decrease this value in suspend mode?

[SkinHead69]

oh yeah!!! now, my device [818 Pro] run faster @240MHz...it seems as same as XDA Mini...[even better]...thanx!!!

cheers...Oi...! :)

[K4V4N4]

i'm using a Dopod 818pro,and i already used the omap overclock v.0.2 ... i copied it into my device (not storage card).then i run it on 252Mhz,and set action..so the speed is already 252Mhz and very fast... but i've got some problem,when i turn my device to standby mode,and when i push the power button to sms someone,i check my speed,it went back to 180MHz,is it normal?? cause if it runs under 180MHz,that means it didn't run at 252MHz right????

thanx any way.....

[ahfunaki]

sort of off topic but that batti program is nice...

it's kind of like the battery meter that comes with spb, but better...

[meschle]

i'm using a Dopod 818pro,and i already used the omap overclock v.0.2 ... i copied it into my device (not storage card).then i run it on 252Mhz,and set action..so the speed is already 252Mhz and very fast... but i've got some problem,when i turn my device to standby mode,and when i push the power button to sms someone,i check my speed,it went back to 180MHz,is it normal?? cause if it runs under 180MHz,that means it didn't run at 252MHz right????

thanx any way.....

Use this cab instead http://forum.xda-developers.com/viewtopic.php?t=56057

[victoradjei]

Or this one

http://forum.xda-developers.com/viewtopic.php?t=55782

:lol: