99% T-chinese & S-Chinese ROM here <QTEK 130 ROM>

[Asukal]

:) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :)

---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>

ftp://xdaupload@xda-developers.com/Universal/DarkForce_CHS130.rar

＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://xdaupload@xda-developers.com/Universal/DarkForce_CHT_130.rar

PLS use Extrom files which are in above archives to run correctly

See the detaile on next page and use as your own risk! :D

----------------------------------------------------------------------------

----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB

Traditional Chinese130764 Universal

@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)

*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab

@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.

@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.

@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.

@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.

@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.

http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef

Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.

or make disable the Device Lock on the Today Screen.
Good Luck

[chris_khho]

Thanks again for the great word....

Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)

But this one is ok as I didn't install your cab file.

Thanks a lot.

Cheers,

[mwang]

Thanks again , will try today

[Asukal]

this is the new one only wince.nls and font, also font registry.

http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)

PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os. :oops:
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.

Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)


Good luck!

[mwang]

The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback

[parkertseng]

hi asukal,

can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks

Parker

[Asukal]

mwang@

ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.

i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.

now i making new mui with dll from new rom.

parkertseng@
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.

do someboday sent me a whole registry from Dopod900 chines OS?

i will try but take time and

[parkertseng]

i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!

[mwang]

parkertseng@
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.

do someboday sent me a whole registry from Dopod900 chines OS?

i will try but take time and

Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want

[bonna]

parkertseng@
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.

do someboday sent me a whole registry from Dopod900 chines OS?

i will try but take time and

Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want

Excuse me,Would you tell me how to use the Dopod files.rar?

[Asukal]

thanks,
but Module and file....i guess those dumped files are dead PE Header.

i need dll with correct PE headers. OK i will dump chinese ROM by my self.

but
i need whole registry value from live device, not from hive in rom.

because all 2bites registries are only in a live device, not in hive.

[mwang]

i need whole registry value from live device, not from hive in rom.

because all 2bites registries are only in a live device, not in hive.

Please pm to me how to get it ,I will doing tonight

[bonna]

thanks,
but Module and file....i guess those dumped files are dead PE Header.

i need dll with correct PE headers. OK i will dump chinese ROM by my self.

but
i need whole registry value from live device, not from hive in rom.

because all 2bites registries are only in a live device, not in hive.


That's a great message, I'm waiting your dumper,and tell me how to return to Universal.

Thanks

[bonna]

How to solve inputing Chinese?
Ce-star or system itself

[Asukal]

No SIP for chines in it now.
you must install your favorite SIP.

to get the registry, use TRE (Tascal registry editor and export registry on device,

[mwang]

to get the registry, use TRE (Tascal registry editor and export registry on device,

Done , see your pm

[Asukal]

Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.

i injected wince.nls and fonts which can be supported CJK+Thai in that.

uploaded here<no Chinese SIP and Interface,Just encode & font support>

http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe

see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html

<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe

ROM version 1.20 lower than i-mate 1.30_AKU2

[chris_khho]

Thanks a lot again. I want the A2DP!!!! Yeah.

[Asukal]

to get the registry, use TRE (Tascal registry editor and export registry on device,

Done , see your pm

ya, i got it.
but it is not sure it can work or not :oops:
must check all regostry one by one.

i tried in my passed, still not good result.

any way, pls wait with long sight!

now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,, :o

[Asukal]

to get the registry, use TRE (Tascal registry editor and export registry on device,

Done , see your pm

i am checking all registry from you.

question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?

[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]

[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"

Wait for your rplay.

[mwang]

i am checking all registry from you.

question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?

[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]

[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"

Wait for your rplay.

This is OS SIP , when I export registry, no any other software and extended rom.

[Asukal]

thanks, i got it. i will keep on working

one thing, before i tried to adapt Japanese SIP from Japanese WM5,
it was difficult to replace because i must replace all IME on OS.
finaly i couldnt.

But the IME from Platform Builder can be addapt to Universal.
So possiblity of this way is higher, i think.

if someboday run WM Platform Builder with chinese emviroment,
i need dll and regosties from there. more easy.

on the other side,
Now i uploaded some versions of edited rom.
PLS enjoy. No chinese SIP there yet, sorry. pls wait.

http://www.asukal.jp/hv_rom/Roms.htm

[darkj2k]

Asukal,

What files do you need from platform builder? My company just bought a set of CE 5.0 platform builder last week and I don't know is there any difference between CE and mobile version platform builder since I am not a programmer.

If this help pls let me know what files do you need then I will ask my boy pass theses files to me.

I like to implement the original trad. Chinese input method from WM5 trad. version to my WWE Acer N300 since I do not like the 3rd parties’ Chinese input method.

darkj2k

[Asukal]

Asukal,

What files do you need from platform builder? My company just bought a set of CE 5.0 platform builder last week and I don't know is there any difference between CE and mobile version platform builder since I am not a programmer.

If this help pls let me know what files do you need then I will ask my boy pass theses files to me.

I like to implement the original trad. Chinese input method from WM5 trad. version to my WWE Acer N300 since I do not like the 3rd parties’ Chinese input method.

darkj2k

that noce news,

i need files from built OS.

build OS in Chinese Language, with input method(not SIP version)
then you can find your Built OS files in the folder
C:\WINCE500\PBWorkspaces\****yours\

on my emviroment, once i built Japanese OS, very diffcult to build pure Chinese OS, i tried to but they all mixed Japanese+Chinese files and cant work.

@@once thing:::
to bring Chinese SIP of WM5 to English OS, it is very diffcult and i think very very long way, because Deafult SIP on OS is work as IME.
to replace another IME, we must change a lot of system files on OS.

But if we use the CE.net sip and IME on WM5, very easy to use.
just use as add on, no need relace whole.
So you can buuild Chinese Wince.Net OS with Platform Builder.

I already sccsessfull to use this way in Japanese.

[bonna]

The great work!
CE-STAR 2.8R1 for WM5 is an excellent SIP, would you try it to ROM.
I am not so sure if the QTEK ROM is the best, but it is the smallest & full-grown.
T-Chinese editon is exist now, but Simp-Chinese edition maybe not forever. So ask you for making a Simp-Chinese later Qtek ROM. New Qtek ROM should be available to download in 5 to 8 days. http://forum.xda-developers.com/viewtopic.php?t=45666

Thanks

[Asukal]

The great work!
CE-STAR 2.8R1 for WM5 is an excellent SIP, would you try it to ROM.
I am not so sure if the QTEK ROM is the best, but it is the smallest & full-grown.
T-Chinese editon is exist now, but Simp-Chinese edition maybe not forever. So ask you for making a Simp-Chinese later Qtek ROM. New Qtek ROM should be available to download in 5 to 8 days. http://forum.xda-developers.com/viewtopic.php?t=45666

Thanks

hi! bonna!
Now i got successgfull 99% Japanese OS Universl now!!!

As you know NO GSM Network in japan, so no chance to get Japanese
Universal also..... :cry: So icreated it!

Simple chinese also never come coze No 3G network yet,right?

If you strongly wish to have Simple chinese OS on Universal,
Now i can help you, coz i alreay got expierence.,

But you must work it, i will give you advice step by step

1; get the OS core mui in Simples CHinese OS,,Exaples from Himalaya OS.

2;HTC applilcation and Setting ,get the Tradional chinese one and transrate it to simples chinese,

3l also get the iniflashfiles.dat and iniboj.dat from Trad Chinese device,
and transrate them to Simple chinese.

If you finish thoes works, i will tell next step!

[Asukal]

The great work!
CE-STAR 2.8R1 for WM5 is an excellent SIP, would you try it to ROM.
I am not so sure if the QTEK ROM is the best, but it is the smallest & full-grown.
T-Chinese editon is exist now, but Simp-Chinese edition maybe not forever. So ask you for making a Simp-Chinese later Qtek ROM. New Qtek ROM should be available to download in 5 to 8 days. http://forum.xda-developers.com/viewtopic.php?t=45666

Thanks

hi! bonna!
Now i got successgfull 99% Japanese OS Universl now!!!

As you know NO GSM Network in japan, so no chance to get Japanese
Universal also..... :cry: So icreated it!

Simple chinese also never come coze No 3G network yet,right?

If you strongly wish to have Simple chinese OS on Universal,
Now i can help you, coz i alreay got expierence.,

But you must work it, i will give you advice step by step

1; get the OS core mui in Simples CHinese OS,,Exaples from Himalaya OS.

2;HTC applilcation and Setting ,get the Tradional chinese one and transrate it to simples chinese,

3l also get the iniflashfiles.dat and iniboj.dat from Trad Chinese device,
and transrate them to Simple chinese.

If you finish thoes works, i will tell next step!

[Asukal]

QTEK AKU2 + A2DP 1.30 WWE ROM Base Traditional Chinese ROM <Dark-Force CHT Ver.1>

by Asukal

*Tools and Informations are Mr,Mamaich, Mr, Buzz_lightyear, Mr,Ball666
Special thenks for them!!!!!!!!!!!!!!!!!!!

*Also thanks for Mr,mwang
Helping me to transrate and making iniflash files into CHT !

@Before Flash-------------------------------------------------------------------

1;PLS use Extrom files in this Archive,
if some of them missing, i can not guarantee all applicaitons and function will be worked.

2;ExtRom Unlokers; i attached 3 kinds of Unlkcers & Unhider.
PLS find the Numbers of you currentry ROM version before Upgrade with this rom.

Some of them can be just installed CAB, but some of them,, need excute Unhider from Programs
If you can find Extrom Unhider.exe on programs, pls excute, but if you can not find, no need.

(Unhider and Unlocker are belongs to Buzz!! thanks!)

3; 130SP_Uni_Extrom_Unhider_Special.cab
Some version of ROM, has troubles, eeven it was visualble, adn also writable,
the CABS in Extrom will be disapera after you make soft reset.

If you find this problem, you can use this unlocker,

4;Radio ROM 1.0 or some low version of that, phone is not work fine,
PLS upgrade Radio ROM to 1.09

*To flash ROM ----------------------------------------------------

1;Suggest go to Boot loader, Power Button + Light Button +Stylus.

2;Just excute MAupgrade_noID.exe in this Archive

3:Follow PC screen! and make it finish and make hard rest as usual.


* 1st boot from Flash ROM ------------------------------------------

Just proceed as usual!
*Suggest you had better not use the Password while first booting,
i found some times the X <Close Buttons can not apear>

*--------other information-----------------------------------------

Extrom contains following files

@Followings are Orignal QTEK files

Signed_SSD_Shortcut_WWE.sa.CAB
MP_CVSDcpl_20060216.cab
MP_Enable_VT_RTPlugin_0727_2_signed.CAB
MP_EnableDRM_UAProfile_Universal_AKU2.0_051226.CAB
MP_mHub_WWE_051226.CAB
MP_MMSAutoDisconnect_060106.CAB
MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-051220.CAB
PP_ECall(112-911)_UNI.CAB
PP_pIE-Favorites_UNI.CAB
PP_pIE-Homepage_UNI_130113.CAB
PP_Version_UNI_130176.CAB
PT_Disconnect(Long)_UNI.CAB
PT_OperatorName_UNI.CAB
PT_Qtek-Certificate_UNI.CAB
PT_UAProf_UNI.CAB

@Followings are my favorites and beleve better life for you!
VGA_Capture.cab
BatteryInfo.cab
ChinaFEP_No5.cab
Config.txt
custom.bmp
Default_Signed_DisableSecurity.CAB
Disable_ENG_SIP.cab
EnableRapi.cab
MSN_Notify.cab
SAPSetting.cab

@China IME ; i am working to adpat CHT IME from Chinese CHT OS,,,but still need time.
so i include ChinaFEP_No5.cab which can hand write CHT & CHS, aslo PinYin Key.
HardKeyboard was not supported

You can go to SIP Option to switch menu and Chalactor both of CHT & CHS.
<This was hacked from other soft,,,,shi,,seacret!

@The 2nd boot screen
if you dont like that, you can replace "welcomehead.192.png" in the windows folder.
but once you make hard rest,,, the RED SCREEN will come again...Dont you like that???

@i modifyed to unvisuable some English SIP by Disable_ENG_SIP.cab.
if you need those SIP,
go to following regostry and change the value of "IsSIPInputMethod" to 1 from O. you can use them,

---------------REG----------------------------------------------------------
[HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\DefaultIcon]
@="msim.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\InprocServer32]
@="msim.dll"

[HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
@="0"

[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}]
@="Keyboard"
"ShiftLock"=dword:00000000
"KBMode"=dword:00000005

[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\DefaultIcon]
@="msim.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\InprocServer32]
@="msim.dll"

[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
@="1"

[HKEY_CLASSES_ROOT\CLSID\{42429690-ae04-11d0-a4f8-00aa00a749b9}]
@="Letter Recognizer"
"ShiftLock"=dword:00000000
"Desc"="With Letter Recognizer you can enter characters using natural character strokes and gestures you may be familiar with."
"Accents"=dword:00000000

[HKEY_CLASSES_ROOT\CLSID\{42429690-ae04-11d0-a4f8-00aa00a749b9}\DefaultIcon]
@="msim.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{42429690-ae04-11d0-a4f8-00aa00a749b9}\InprocServer32]
@="msim.dll"

[HKEY_CLASSES_ROOT\CLSID\{42429690-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
@="0"

[HKEY_CLASSES_ROOT\CLSID\{F0034DD0-2AD4-11d1-9CB0-E84BE8000000}]
@="Transcriber"
"Desc"="With Transcriber you can write in cursive, print or mixed handwriting on the screen and your ink is instantly recognized."

[HKEY_CLASSES_ROOT\CLSID\{F0034DD0-2AD4-11d1-9CB0-E84BE8000000}\InprocServer32]
@="\\windows\\TranscriberSip.Dll"

[HKEY_CLASSES_ROOT\CLSID\{F0034DD0-2AD4-11d1-9CB0-E84BE8000000}\IsSIPInputMethod]
@="1"
----------------------------------------------------------------------------------

i believe this ROM was 98% of CHT,,,,,,
But i didnt test all functions and all conditions, so if you found some problems,,,pls let me know!
i will try to my best to fix it!

Thanks guys!

Asukaly yours!

asukal@public.szptt.net.cn


i will go to next step...CHS :D

sorry can not upload,,,, :cry:

[mwang]

great ! good news and good job Asukla waiting your upload

[Asukal]

hi, mr,mwang, thank you,too!!

if you have received my rom with PM,,, forget the Extrom files in there,
Use the one here,

i got some mistake last one, and this is better :lol:
i will upload rom with this one,

wwwwo! samll files can be UL, but large can not!

[mwang]

hi, mr,mwang, thank you,too!!

if you have received my rom with PM,,, forget the Extrom files in there,
Use the one here,

i got some mistake last one, and this is better :lol:
i will upload rom with this one,

wwwwo! samll files can be UL, but large can not!

I didnt received your rom yet , only show text in pm :cry:
wait your upload,thanks

[Asukal]

hey! now finished it witout sleep!!!

just finished cook,, it should be very hot one!

but i did not have latest resources of Simples chines OS,
so only some of mui were from CHT rom,
And on my PC,, if i edit files in Simples chinese chalactor,,
it will change to "???????"

so i didnt do that!

Help files, also all dialogs, should be perfect!!
i can say 99% of this ROM is Simple chinese.

But still no IME for chinese,,, just installed from Extrom,
<same as CHT version>

PLS read follow well!
Once i get the latest resource of Simple chinese, i will work again

-----------------attention for the Dark Forc 130 CHS rom-----
1; Camera Application = Trad Chinese
<Camera Appli create "My Pictures" folder in Trad Chinese automaticlay,
so you can find 2 x "My Pictures" in Trad Chinese and Simple Chinese both :cry:

@Also My Music folders are both 2 of Trad and Simple Chinese,

2:Clear Vue = English menu <but Chinese PDF enable

3:CommManager & Clear Storage= English

4:Enlloler = Trad Chinese

5:MIDLet manager = Trad Chinese

6: The Security tab of Bluetooth Manager=Trad Chinese

7;Just some part of MMS composer is Trad Chinese
<almost Simple chinese>

8:Password can not work,,,
i need latest version of shellres&tapres.dll.0408.mui
or need someboday edit !

--------------------------------------------------------------------
i will upload to xxxxx.s ftp,,, then hope Mr,mwang help me to upload here
both of CHT & CHS ROM

i will sleep now,,,,08:30 in the morning,,,
can not go HK,,,mr,mwang!! :oops:

[mwang]

upload to ftp://xda:xda@ftp.xda-developers.com//Uploads/Universal/DarkForce_CHT_130.rar

please try it and report back problem,thanks

[Asukal]

upload to ftp://xda:xda@ftp.xda-developers.com//Uploads/Universal/DarkForce_CHT_130.rar

please try it and report back problem,thanks

Thanks for mr.mwang!! :D

i am fixing problems of Simple Chinese OS with QTEK 1.30 rom
and now final stage of that!

Simple Chines ROM,,,,,will be finished 1 hurs later! :D :D :D

the sources from Profet CHS,,, still not usefull,,soryy.
But i have found the source in Himlaya CHS 2.6 were workable!!
also some of files from Himalaya PPC2003, i modeify to work.
then,,,,

now only camera and 3G - and SmartDialaer are not Sinple chinese!
Complietly!!!! :D :D :D

wait for a while!

oh! i made Addring Tone exe in Sinple Chinese version,
i will add this to Extrom of CHS version,

this is for other GuyS!

[Asukal]

ya ya ya! now finished!

only followings are not simplized chinse.

1;Camera Application

2;3G appli <Video Phone setting>

3:SmartDiler

4:CDS Line in Settings
and very samll and miner parts!

@Give up to fix set Applicbutton automaticaly.
Please assain Camera Button & Voice Diler to Buttons manually,
it will work correctly!

i could uploaded here!! thanks you mwang!

ftp://xdaupload@xda-developers.com/Universal/DarkForce_CHS130.rar

Other issue is same as CHT version.
thanks!

[Asukal]

DL from here,,,,,
ftp://xdaupload@xda-developers.com/Universal/DarkForce_Twin_CHINA.rar

Special thanks to Mr.mWang and Mr,Rayomd@Shenzhen to help transration!

And,,,,,
Mr,mWang!!! pls help me to transrate following read me text to
Chinese!! :lol:

---------------Attention----------------

99.08% SImple Chinse OS for Universal,

@All aplications and settings are Simple chinse now.
<but once excute camera application, Trad Chinses folders are created in My documents>

@"China Mobile" <CMACC> GPRS and Wap also MMS setting automatlicay,

@No Chinese SIP in this ROM,
so I installed simple version of Chinse Input System.

This was hacked from Japanese Software.
<C-J Transrator Software>

So some menue are Japanese ：D

Example :<Space key > on Hand writing is japanese.

*PinYin and ChuYin input
*Simple &Traditional Chinse Hand Writig and Serch.
*You can change the Option menu English / Simple Chinese / Trad Chinse /
and also Japanese : D. <go to Keyboard Option>

*this is for just for mean time.

You can uninstall this SIP, if you dont like!
I suggest you install better SIP software by yourself.

@Application Button;
*Camera Button and Voice Command Buttons are not assained automaticaly.
PLS asain them manualy.

*Go Setting--Buttons--then select
Button No5: Voice Speed Dial<engilish>
Button No3; Camera <Chinese>

@Exrtom included<_ms.nbf>
PLs flash this Extrom with OS rom<nk.nbf>

without this Extrom, Some function of OS will not work correctly.
i will not take responsbility if you edit or delete Extrom,or not flashed this.

@possiblity of unknown bugsm, try to use as your own risk.

@read Terms.txt in archive,
----------------------------------------------------------------------------

Asukaly yours!

[Asukal]

i also made special rom with QTEK 130 WWE.

Both of Simple-Tradtional Chinese interface can be switchable,
any time,

*Shell folders [Start menu] [Programs] and names of Program's Icon are Tradiotnal chiese on both of T&S UI.

*Sub-Folders in My Documents also useing Trad Chinese name.

But almost of the setting and programs can be changed to your favorite chinese interface!

MingLiu font is System font on both UI.

You can dl from here.....included ms_.nbf <Extrom image>
Pls use this extrom to enable switching UI languages!

DL from here!
ftp://xdaupload@xda-developers.com/Universal/Uni_DarkForce_CHS130_Asukal.rar

Asukaly yours!

[mwang]

And,,,,,
Mr,mWang!!! pls help me to transrate following read me text to
Chinese!! :lol:

Asukaly yours!

You got it , I will do now :D

[Asukal]

mWang!!!thanks,.

i thought i should sleep earier last night!

but i have got very big discavly about localize,,,,,
so now still tesing,,,,can not sleep!!

now so exite,,,if i success this test,,,,the localize will be very simple
steps,,,,oh! too exite to sleeep!

[mwang]

And,,,,,
Mr,mWang!!! pls help me to transrate following read me text to
Chinese!! :lol:



请注意:

99.99% 繁体或简体系统 使用在 Universal,

@所有應用和設置現在是繁体或简体.
<但使用相机的应用会出现繁体在我的文件夹>

@":中国移动" <CMACC> GPRS,Wap 和彩信自动设置.


@这个没有自带中文输入,
所以我安装了中文输入系统的简单的版本.

这取自日本软件.
<C-J Transrator Software>

所以某些菜单是日语的：D

例子 :<空格键 > 在手写文字是日语.

*拼音和注音输入
*繁体或简体手写和查寻.
*您能改变选择菜单 英文/简体中文/繁体中文 还包括日语: D 。
<请至输入菜单改变>

*这只是暂时的.

如果您不喜欢,您能反安裝这个中文输入法!
我建议您单独安装更好的中文输入法软件。

@应用按钮 :
*相机按钮和声音命令按钮他们不是自动设自,请自行手没 .

*至设定--按键--选择
功能键 4: Voice Speed Dial<英文>
功能键 3; 相机 <中文>

@包括 Exrtom <_ms.nbf>
请同时與 OS rom<nk.nbf> 和这个 Extrom 一起刷.

没有这个 Extrom, 某一系统作用不会正确地运作
我不会负责任如果您编辑或删除Extrom, 或没刷这Exrtom <_ms.nbf>。

@ 可能有未知的臭虫, 尝试使用这个rom是您自己的风险。

@请读Terms.txt 在档案里,


使用条件

如果你对简体OS不满意或者有什么意见



马上停止使用,
在你说什么意见我之前先停止使用

假如从你那里听到异议或者意见,

我会马上停止 开发新的简体OS！

请享用这!
Asukaly yours[quote]

[mwang]

something wrong in ftp both CHS or Twin CHINA rom can't download dont know why

[leofungwai]

First of all , need to say thanks for such a good rom with cht support and block regconizer together !! Thanks !!


also, I would like to report problem, the "piture and Video" will hang so earily ...
even the device is idle ...

[garmer]

hi,buddy,i'm a newly, and i like the simplified ROM,but i dont know how to download it, so please tell me how could i get it? or just send it to me by my QQ: 317289951,thanks a lot!!!!!

[alcare4]

hi sir, i try to DL the CHT rom but cannot link. please update the link thanks

[alcare4]

still cannot link to the ftp link.....can help??

[blue-coffee]

thank you
but I can't download!why?