new rom made my jasjar a brick :(

[nabil2000]

I used the new rom from i-mate JASJAR_WWE_13076_164_10900_wwe_ship, it gave me an error message error 116, i followed instructions to recover, no use, i cannot even hard reset any more (it gives me the white screen, and when i press 0, it just goes back to be switched off).
I am going to put back the previous rom if it works...
anyone had this problem? any suggestion how to solve it?
help much appreciated
Nabil

[VIPPER2004]

Can u put back on bootloader menu?
In my upgrade it did the same, but it could go to bootlader... then i tryed to flash it again and it worked ok.

[nabil2000]

I only get a white screen when i hard resest with x and 0 option...
how do i get to bootloader?
help much appreciated :)

[VIPPER2004]

Reset (stylus) + Power + Light
A thing like that

[VIPPER2004]

Bootloader mode: Hold light and power buttons together and reset with stilus.

[nabil2000]

thanx for the tip...
i get the message on the device upgrading the radio stack, so i have access to the bootlaoder, then i get an error message on the pc side...
so i made progress, but still not working to completion :(

[nabil2000]

hope it works thanx a million dude u really rock!

[nabil2000]

Since this helped me, I will write the procedure again here:
You need to have access to the bootloader.
Connect the jasjar to pc usb
Access bootloader
To do that u press together the power button and the light button (light button is 3rd button in the front) and reset button (with stylus), u might need to put stylus in mouth to do that as it is a bit fiddly.
The screen will be dark but if u use flash light on it u can see usb written on the screen
Then start the upgrade from PC, u might need to try all of this a few times, it took me three attempts to get the upgrade started
You will also be able to see the message upgrade in progress on the jasjar screen which will be still dark.
Nabil out

[VIPPER2004]

Glad that your universal is up.
:lol: