Bluetooth Issue with new JasJarROM

[Lord Buckingham]

Has anyone tried to pair the new ROM with any inbuilt in vehicle systems, I tried to use this with my Audi, and the device pairs OK and connects but then after an outgoing call is ended the Voice dial software starts up and wants me record a voice tag...most wierd.

On incoming calls the device complains that the "phone is busy we can not record" before routing the audio to the speaker of the device and not the hansdfree.

Just wondering if anyone else had seen similar issues with this or any other type of BT car kit?

Tried it with my Wizard and don't see any issues!

[gemito138]

BLUETOOTH STACK IS HORRIBLE.... I have problem with my headset (jabra bt 800, no caller id, sometimes bluetooth off, ...) and with bluetooth mouse (thinkoutside, the pointer is slowly and i can control the pointer). I don't understand how a 1000 € phone has this problem. :(

[numanoids]

I know its not a factory fit piece of kit, but mine has worked flawlessly with my Parrot CK3300 on handsfree and GPS

[albianir]

with my Pioneer DEH-P70BT don't work :(

http://www.pioneer.it/images/products/caraudio/pioneer/dehp70bt_large.jpg

[nitin]

Lord Buckghingam
I have partial fix if you have c6a6 (mine is june 2005 made) 2006 MY.

All the people here will clamor to say that it works with this and works with that - but what they dont know is that most of the aftermarket kits will do headset profile, not handsfree profile.

What fix i dont have is BT switching itself off - have used Buzz cab - but doesnt work.

If I donot allow my Jasjar to sleep - it works flawlessly (but drains out in 12 hrs)

And why the fxxx this site has gone horrible? Somebody said that all pics are now port 81? Who in the right mind will do that?

Moderator - most of the offices firewalls have port 81 blocked - mine is too (we are proxied)

If you want this site to be somewhat useful - the icons should be on port 80

[tailazoom]

Latest rom fixed bluetooth switching itself off

[miguelromerom]

yes i have the same problem with parrot ck3100 :(, it´s a problem with sincronicing contacts...

:(

[miguelromerom]

where the fix on Buzz.


Regards.

[lie_ui]

I'm still experiencing the BT shutdown by itself occasionally. During the last few days, at least 5 times it shuts down unexpectedly.

[miguelromerom]

in my experience only when enlaced with ck3100 :(

[nitin]

BT switching off is not fixed.
I can replicate this problem - if I remove any power saving - BT worlks. If I put pwer saving at 3 mins - exactly after 3mins - BT icon is removed from my Audi. Same in my BMW.

If I get a call, 30 seconds in a call - BT is switched on and call is transferred back onto the the car. But the call comes onto the phone and I have to pick phone raditional way - not by car.

[tailazoom]

Sorry for you but my jasjar with latest italian rom does not turn bluetooth off. Tested working with my headset handling incoming and outgoing calls, for more than 60 houres. With original rom did not last more than 4 houres.

[nitin]

Tailazoom - May I have to repeat my post as above?

"most of the people say it works - but they donot know they are using headset profile - not handsfree"
Your BT is headset - the original poster with Audi (and all cars) is talking about handsfree profile.


Just for info - Headset profile - only audio (PCM'd) Handsfree - raw audio - all digital - untouched by phone audio electronics - and then shaped by DSP of car kit.


And Parrot etc which people use here are resorting to headset profile.

[miguelromerom]

How can i use Handsfree ?¿?¿

Thanks

[Biso007]

I 'm not sure it's the same problem or not but the BT blue lid will continue to blink indicating that BT is working, but incoming calls doesn't ring in the earpiece some time ... more over, with the headset icon on the phone pad, but when I dial a number it doesn't send the voice to the earpiece as well till I press the earpice button to force it to search for the device signal ... and all this will happen randomly without any pattern.

is it the same problem ?

[nitin]

Miguel - Handsfree kits are pretty costly. Eg - Nokia CARK101 (200$?)
Compare that with headsets which are 50$ a pop. All cars coming out of Europe have built in kits. So, if you have a european car - you are in luck. But all these cars are built with EXACT BT spec. So, you get some phone which doesnot stick to spec - weird things happen.

Parrot kits donot have proper handsfree implementations - they go more for compatibilty - and therefore 99% of parrot users are actually headset+ some rudimentary noise and echo shaping.

Headset profiles are useless in cars becasue there is no DSP - and therefore the other party will hear the echo. In Handsfree - the other party wont even know you are talking with your phone in your bag!!

BIS - The blue LED has no connection(thats what i think) with BT. If BT turns itself off, the LED will continue to blink - so its a useless LED.

I had the same problem that you are describing - that voice is not transferred - I guess this is common thing with MS software - its highly unpredictable.

[miguelromerom]

how can i do to don´t sincronice contacts with parrot ?¿?

Regards

[tripledes]

Hi, I have posted some problems I'm having between the new rom upgrade from i-mate and my Jabra BT800.

As far as I can understand from these posts my Jabra should be detected as a Headset, right? When just upgraded my XDA and tried to connect the Jabra to it I found weird it said the jabra was Hands-free because I always thought it was Headset.

Maybe I'm wrong with all I'm saying but could this be the source of my problem?

Look my post: http://forum.xda-developers.com/viewtopic.php?p=248516#248516 .

Thanks.

[nitin]

Tri...
Updating radio rom will have no effect. BT is actaully done by sw and radio is used to send raw data.

All headset and handsfree are detected as Hands Free Service - so it should not be a problem


Your problem - you can see it as - when BT is not sending voice - refresh the services in your Jabra connection - you will magically see that HandsFree is deselected. This is magic of Windows - its forgets !!!

You can replicate this problem.