sidd
21st March 2006, 02:34 AM
Make sure u r going through the procedure.
1. Your WiFi capable device must be in the range of a Wireless Router (internet connected).
2. I assume that ur Wireless Router is set on security (allready set to allow specific users).
3. Every WiFi device has got an unique ID called MAC address, so your phone has also got a MAC address e.g: 00:09:2D:1F:34:E3. U have to go into the Wireless Router settings to enable ur WiFi phone.
4. Go into your Wireless Router settings (u need router's login ID & password to login) and add a device, give it ur phone's MAC address (Point 5) and a name (e.g. My XDA), Apply->Save->Logout. If ur Wireless router is security enabled then there must be a password called "WEP Key" e.g. "AE4ED24C54", now write it down to put it in your Phone to login to the Wireless Router to use the WiFi internet.
5. Find your phone's MAC address at: "Start->Settings->Connections(tab)->WLAN->(in the status: Not connected to network) click the bottom left Green button->click WLAN button(it will turn green from red)->ok->in the MAC: would be ur device MAC address(e.g: 00:09:2D:1F:34:E3). (write down on a piece of paper for the router settings).
6. As your phone is already "WiFi switched on" in point 5, it should detect ur Wireless Router once u finish point 4.
7. Phone will detect & show the name of ur Wireless Router, select it, it will ask for the Password now (WEP Key), enter the Wep Key and here u go.
8. Now ur Today screen Top "G" icon should change (antenna type icon) and show ur decice as connected in few seconds, u can switch it off by clicking that icon and click "Turn OFF WiFi" on the popup, you can switch it back on by: Start->Program->Wireless Manager->WiFi icon.
This explaination is only for WiFi enabled devices.
:idea: GoodLuck :idea:
1. Your WiFi capable device must be in the range of a Wireless Router (internet connected).
2. I assume that ur Wireless Router is set on security (allready set to allow specific users).
3. Every WiFi device has got an unique ID called MAC address, so your phone has also got a MAC address e.g: 00:09:2D:1F:34:E3. U have to go into the Wireless Router settings to enable ur WiFi phone.
4. Go into your Wireless Router settings (u need router's login ID & password to login) and add a device, give it ur phone's MAC address (Point 5) and a name (e.g. My XDA), Apply->Save->Logout. If ur Wireless router is security enabled then there must be a password called "WEP Key" e.g. "AE4ED24C54", now write it down to put it in your Phone to login to the Wireless Router to use the WiFi internet.
5. Find your phone's MAC address at: "Start->Settings->Connections(tab)->WLAN->(in the status: Not connected to network) click the bottom left Green button->click WLAN button(it will turn green from red)->ok->in the MAC: would be ur device MAC address(e.g: 00:09:2D:1F:34:E3). (write down on a piece of paper for the router settings).
6. As your phone is already "WiFi switched on" in point 5, it should detect ur Wireless Router once u finish point 4.
7. Phone will detect & show the name of ur Wireless Router, select it, it will ask for the Password now (WEP Key), enter the Wep Key and here u go.
8. Now ur Today screen Top "G" icon should change (antenna type icon) and show ur decice as connected in few seconds, u can switch it off by clicking that icon and click "Turn OFF WiFi" on the popup, you can switch it back on by: Start->Program->Wireless Manager->WiFi icon.
This explaination is only for WiFi enabled devices.
:idea: GoodLuck :idea: