Uable to UNHIDE the Extended_ROM after JJ ROM Upgrade!

[mobiler]

I upgraded today my O2 to the latest JJ ROM (1.30.76 WWE)

Now I noticed that WITHOUT running the Extended ROM unlocker (like I need to my previous O2 ROM). I am able to access it through TotalCommander and delete and put files in there, so it's not locked.

BUT I am unable to Unhide it so it would appear visible to the system.

Here the changes I am trying to make (The did work on my previous ROM)



[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad \TRUEFFS_DOC1]
"Bootphase"=dword:00000002
"Order"=dword:00000001
"LoadFlags"=dword:00000001
"DriverPath"="Drivers\BuiltIn\TrueFFS_G31"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \TRUEFFS_DOC1]
"MountHidden"=dword:00000000
"Folder"="ExtendedROM"
"PartitionDriver"=""
"Name"=""
"DefaultFileSystem"="FATFS"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \SDMemory]
"MountHidden"=dword:00000000
"Folder"="SD Card"



I emphesize the fact that reading and writing to the ROM with total commander does work fine. But why can't I see it anymore in the filesystem

[Jorgee]

Have you tried running the unlocker/Unhider? I have run that under the new imate ROM, this is the one that pops up with a window to reboot TWICE. Then i soft reset via software (not reset hole) and it works.

Total commander can see ExtendedROM even if you dont unlock or unhide it. You just cant write to it i think if it is not unlocked.

You have to un-hide the partition though so it will come out as one of the options when installing programs.

May I ask why do you need to unhide it?

[mobiler]

Have you tried running the unlocker/Unhider? I have run that under the new imate ROM, this is the one that pops up with a window to reboot TWICE. Then i soft reset via software (not reset hole) and it works.

Total commander can see ExtendedROM even if you dont unlock or unhide it. You just cant write to it i think if it is not unlocked.

You have to un-hide the partition though so it will come out as one of the options when installing programs.

May I ask why do you need to unhide it?

Hi Jorgee,
Yes I did just that I ran this 9k cab which asks you to reset the device twice. Then I used a software soft reset (xpShutdown) . still nothing.. the extendedrom is accessible and writable but still hidden.

The reason I would like to unhide it is obviously to install programs on it just like i did before the JJ rom upgrade which i did yesterday.

Thanks

[dah54]

I upgraded today my O2 to the latest JJ ROM (1.30.76 WWE)

Now I noticed that WITHOUT running the Extended ROM unlocker (like I need to my previous O2 ROM). I am able to access it through TotalCommander and delete and put files in there, so it's not locked.

BUT I am unable to Unhide it so it would appear visible to the system.

Here the changes I am trying to make (The did work on my previous ROM)



[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad \TRUEFFS_DOC1]
"Bootphase"=dword:00000002
"Order"=dword:00000001
"LoadFlags"=dword:00000001
"DriverPath"="Drivers\BuiltIn\TrueFFS_G31"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \TRUEFFS_DOC1]
"MountHidden"=dword:00000000
"Folder"="ExtendedROM"
"PartitionDriver"=""
"Name"=""
"DefaultFileSystem"="FATFS"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \SDMemory]
"MountHidden"=dword:00000000
"Folder"="SD Card"



I emphesize the fact that reading and writing to the ROM with total commander does work fine. But why can't I see it anymore in the filesystem

Can you go to HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TrueFFS and list the keys that begin with TrueFFS?
Next as you appear to have a registry error, could you actually list what is in your registry for the keys you have posted above, rather than simply pasting these values into the post?

Thanks

[mobiler]

I upgraded today my O2 to the latest JJ ROM (1.30.76 WWE)

Now I noticed that WITHOUT running the Extended ROM unlocker (like I need to my previous O2 ROM). I am able to access it through TotalCommander and delete and put files in there, so it's not locked.

BUT I am unable to Unhide it so it would appear visible to the system.

Here the changes I am trying to make (The did work on my previous ROM)



[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad \TRUEFFS_DOC1]
"Bootphase"=dword:00000002
"Order"=dword:00000001
"LoadFlags"=dword:00000001
"DriverPath"="Drivers\BuiltIn\TrueFFS_G31"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \TRUEFFS_DOC1]
"MountHidden"=dword:00000000
"Folder"="ExtendedROM"
"PartitionDriver"=""
"Name"=""
"DefaultFileSystem"="FATFS"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \SDMemory]
"MountHidden"=dword:00000000
"Folder"="SD Card"



I emphesize the fact that reading and writing to the ROM with total commander does work fine. But why can't I see it anymore in the filesystem

Can you go to HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TrueFFS and list the keys that begin with TrueFFS?
Next as you appear to have a registry error, could you actually list what is in your registry for the keys you have posted above, rather than simply pasting these values into the post?

Thanks

Thanks dah54,

but problem is just now solved.
This is the problem: DriverPath"="Drivers\BuiltIn\TrueFFS_G31"
Ot should be TrueFFS1 and NOT as it appears TrueFFS_G31. I think the cab sets this value incorrectly. anyway i manually made the change and now it works!

[pierrelp1]

I had the same problem after upgrading to the lastest Orange ROM for M5000 I just follow your registry changes not I have Extended_ROM2 appears, when exploring files.
Is ther a way to only see Extended_ROM without 2 at the end?

Good job

[pierrelp1]

I had the same problem after upgrading to the lastest Orange ROM for M5000 I just follow your registry changes not I have Extended_ROM2 appears, when exploring files.
Is ther a way to only see Extended_ROM without 2 at the end?

Good job

[Jorgee]

Just rename this to anything you like.

HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1]
"MountHidden"=dword:00000000
"Folder"="ExtendedROM"
"PartitionDriver"=""
"Name"=""
"DefaultFileSystem"="FATFS"


I use QTEK_FILESTORE on my device.....

So when I install, i have 3 choices.

1. Device
2. QTEK_FILESTORE
3. Storage Card

[leek]

Here's a CAB which makes the correct changes. I copy it to my \Extended ROM so that \Extended ROM is visible after every hard reset.