Radio Version: 1.11.00 - Anyone can upload here?

[FOSA]

Radio Version: 1.11.00 was just released for the Dopod 900 ROM update

How's the performance? Can someone upload here?

Thanks

[Ecraseur]

Radio 1.11 ;-)

http://sebbbbb.free.fr/9000/UNI_radio1.11.rar

[rip]

i'm upgrading, thanks for the upload, i'll give my quick feedback later today

[bonisalive]

I'll have a try on it... Thanks for sharing the news :D

[sharky48]

I really wanna know what's new in 1.11
1.09 was allready a big improvement for me.

[docraj]

I have been using radio 1.11 for about 24 hrs now and comapred to 1.09:

1. Signal strength is less in same areas
2. Calls are answered immediately (so did 1.09)
3. Call clarity is a tad better (less noise, drop out and echoes)

I will be flashing back to 1.09 because point 1 above is more important than point 3. The difference is not much anyway.

Oh! I forgot. In both radios I am unable to get the Time Zones page via the registry hack:

HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword).

I wish I could get this working as I travel a lot

[rip]

no more bt voice command calls from bt headset, even if i re-install bt hack.

nothing more at the moment

[jamps]

Just upgraded to Radio 1.11.

all I can say right now is that I can't dial from my BT headset (HBH-662).
when I press the button on the headset, it establishes connection, all sounds from JJ are now coming out from the headset until I press the headset button again, sound goes back to JJ.

Note that NO BT voice command hacks were installed before or after, I dialled using Cyberon VC and it used to work perfectly.

Back to 1.09 i guess!

Cheers
JP

[cktlcmd]

How about trying to associate the voice command files again? Maybe it just needs refreshing after the upgrade.

[chris_khho]

Did you check the registry for

HKLM>SOFTWARE>OEM>VoiceCommand>LaunchAPEnable

as "1"????

Hope this help.

Cheers,

[icomefrom]

I installed. What surprised me most is the AS doesn't work fine any more. My pc is Win2003 with no firewall at all. And Qtek1.09 works fine before. I decided to back 1.09.

[taurus_bull2005]

I have been using radio 1.11 for about 24 hrs now and comapred to 1.09:

1. Signal strength is less in same areas
2. Calls are answered immediately (so did 1.09)
3. Call clarity is a tad better (less noise, drop out and echoes)

I will be flashing back to 1.09 because point 1 above is more important than point 3. The difference is not much anyway.

Oh! I forgot. In both radios I am unable to get the Time Zones page via the registry hack:

HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword).

I wish I could get this working as I travel a lot

Same observation here , V 1.06 is the best from BT headset & battery life point of view.

[wormdrummer]

hymmm, I find 1.11 heaps better.. using latest o2 rom...Wakes up alot faster when ringing, works fine with bluetooth supertooth II, and battery life is great... If anything it has made the unit feel faster...

[hrb]

hymmm, I find 1.11 heaps better.. using latest o2 rom...Wakes up alot faster when ringing, works fine with bluetooth supertooth II, and battery life is great... If anything it has made the unit feel faster...

Same findings here. Runs very well, no problems.
Cheers
hrb

[jamps]

Did you check the registry for

HKLM>SOFTWARE>OEM>VoiceCommand>LaunchAPEnable

as "1"????

Hope this help.

Cheers,

Thx chris but it was already set to 1

Cheers
JP

[amavro]

hymmm, I find 1.11 heaps better.. using latest o2 rom...Wakes up alot faster when ringing, works fine with bluetooth supertooth II, and battery life is great... If anything it has made the unit feel faster...

Same findings here. Runs very well, no problems.
Cheers
hrb

Is it better in terms of voice quality , signal and BT than 1.6 or 1.9 ?.
I am asking this because I am using a BT JX-10 and 1.06 and sometimes the voice is "droping" during a conversation.
Also I get some noise.

[Mikee4fun]

The radio stack "seems" to connect quicker to the bluetooth headset. Otherwise signal is the same and their is no issue with the bluetooth headset. I have microsoft voice command that transfers over the headset and its working just fine. It would be nice if this radio could cook me dinner and also make my jas jar boot in 3 seconds but it won't. It makes me laugh when people say signal strengh is better or lower. LMAO Sorry to break the news but the radio stack does not make the difference in signal, its the cel towers. If you want better signal go to another gsm provider or modify a bigger antenna.

Mike

[vikasmal]

Actually Mike, I dont agree; I think it is handset dependent also to some extent. I was recently out on vacation and my friend had a generic Nokia and mine was the O2 Exec. Same service provider for both. He had a full signal whereas my exec had either zero or one bar signal.

Cheers!

LMAO Sorry to break the news but the radio stack does not make the difference in signal, its the cel towers. If you want better signal go to another gsm provider or modify a bigger antenna.

Mike

[edved]

My JJ is giving me grief, this despite the fact that I've upgraded the rom twice now. My problem is that I get missed calls and often have to redial outgoing numbers.

I want to try the new radio version. I have 1.09, but would like to try 1.11.

How do I go about doing this?

cheers,

edved.

[edved]

i'm upgrading, thanks for the upload, i'll give my quick feedback later today

I downloaded this file and it is in Francais. Which is my native tongue, but not my JJ's native tongue :cry:

any help would be appreciated.

cheers,

edved.

[Conchas]

At least since radio version 1.08, I've been suffering from a lot of call drops while using the phone and driving.
Somehow it seems to behave badly at cells handover. I have network type set to 'Auto' and don't want to fix at 'GSM'.

Does anyone fells the same?
Does anyone detected improvement at this level with 1.11?

[flashmat]

I know it will only affect a minority of people, but with radio 1.11.0, Wivit Sim Switcher only half works. It still switches the sims, but reports Invalid or Missing SIM.

I've got the latest rom wireless status today plugin as well, and that reports UMTS O2 - UK or Orange depending on which sim I have active, but it's a mild annoyance to have to lose the valuable screen space to the wireless status plugin as well as Wivit.

Depending on the performance over the next day or so I may have to downgrade radio again.

[Mikee4fun]

@ vikasmal Bro, nokia is a different device, so it has a different antenna. I am referring to the radio stack in the Universal device not another phone like nokia. It is the hardware (antenna) plus the cell towers that make the difference. Plus the nokia may have had an additional radio band on it which the Universal does not have. So there you have it its simple logic. Different antenna, different device, different signal. LMAO

Mike

[afhstingray]

how do i install this to the SPV M5000>?

it gives me a 150 error i think

[Galifrey]

@ vikasmal Bro, nokia is a different device, so it has a different antenna. I am referring to the radio stack in the Universal device not another phone like nokia. It is the hardware (antenna) plus the cell towers that make the difference. Plus the nokia may have had an additional radio band on it which the Universal does not have. So there you have it its simple logic. Different antenna, different device, different signal. LMAO

Mike

Different radio stacks have made a difference to the signal level shown on the antenna on the same phone in the same location for me...

1.09 has been by far the best of the bunch...

The radio stack adjusts the power levels for the antenna gain, the power level radiated by the phone as it gets further from a cell etc etc

Hey if I am wrong its only what I have read, but IME radio stack has the most significant impact on cellphone performance and battery life...

:P

[wh1t3w0lf]

Hi

Tried to install this on my jasjar, rom ver 1.30.76, radio ver 1.09.00, but it fails. I am english abd have no clue on what the update is saying. Got it to go as far as starting the update, my jasjar restarts and then fails on updating it. Any ideas ?

Dont worry, rebooted laptop and it done the update.

[AztecUK]

I did a complete upgrade of my SPV M5000 with Dopod ROMS, this included Radio Rom 1.11.00. I am a Orange UK user and found that the signal strength was shown as less than before and failed to work in areas it did with v1.09.00. I also had this trouble with the v1.03.00 which is what the Orange website still includes.

I have now resolved my signal problems by going back to 1.09.00 but still keeping the Dopod ROM. Can now get service again in places other 2 tested ROMs failed.

I did find 1.11.00 to have slightly better call clarity but the signal was too much of an issue for me so I had to downgrade again.