HELP!!! Urgent!

[h_rladeveze]

Hello. I am in desperate need of help. I left my blueangel charging in the craddle last night only to find it this morning with a blank screen. After trying to soft and hard reset it without any success all it shows is the blue imate startup screen and the software versions in the bottom right hand corner of the screen. I would appreciate any advice on the matter.

[vastloper]

sounds like rom problems
first try remove battery for couple of minutes
also remove sdcard (if any inserted)
replace battery and reset device

if this won't help
Only thing you can try is to update the rom

[h_rladeveze]

I would also appreciate the contact details for a service center in spain. I have an Imate PDA2K bought in the UAE.

[h_rladeveze]

Thank you vastloper, I have tried that several times but makes no difference. On top of everything else I cant update the ROM as ActiveSync will not recognise the device, basically it will not connect to any other device. Any clue?

[xplode]

You do not need activesync to upgdate your rom, you need latest rom no matter which provider or version, reflas and then connect via activesync

[starik]

why would ROM become defective all of a sudden? makes no sense.

take out the main battery and leave it for a few hours, (or overnight), so that the backup battery drains.
Then reassemble the phone - it should perform a hard reset on its own.

If this doesn't work, u may have a hardware problem.

[imatrix]

try this for whoever get stuck at boot screen or in bootloader mode

1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar

2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe

3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.

4. Run mtty (from downloaded) Choose WCEUSBSH001

5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.

6. type "task 28" to get your device formatted

7. type "task 0" to ask your device reboot

8. take the device out of the cradle, and manually reset it if it does not do that already.

good luck.

imatrix