After Stand-By Omapclock reset standard frequency:HELP!!

[hamleto]

Hi,
I use Omapclock+MemMaid 1.6 for overclock (240Mhz) my Jamin,but
after StandBy the frequency return on standard value(180Mhz)!!
You can Help me??
Tank You

Hamleto

[masr1979]

When you added the file to the "notification queue" did you put "the device woke up" in the "event" box? Though personally I would just use smartskey http://forum.xda-developers.com/viewtopic.php?t=41060&highlight=smartskey and set the speed in the ini file.

[laich71]

make sure your not running omapclock.exe of memory card, copy to windows and point all shortcuts to this.

Solved it for me.

[hamleto]

I put Omapclock.exe in /windows and omaplock.lnk (frequency240Mhz) in /windows/startup but after standby the frequency return to 180Mhz and the link in notification queue there's not!!!

I follow this procedure:

1.) Copy the program to anywhere you like
(e.g. Program Files\OmapClock.exe) In Pocket PC

2.) Copy the file and paste shortcut to anywhere you like
(e.g. Windows\start menu\OmapClock) In Pocket PC (Must use shortcut)

3.) Connect your computer with ActiveSync, copy the shorcut file that store in Pocket PC to your computer.

4.) Use the Window XP software, "Notepad" to open the shortcut file >
Change the content to "\Program Files\OmapClock\OmapClock.exe" -clock 216 (Attention :-clock 216 means the speed of overclock is 216. Suggust you use 264 or below.)

5.) After make change the shortcut file, copy this file from computer to replace that shortcut file in the PDA.

6.) Open MemMaid program, select "Notification Queue"
(Second Icon that from left to right)

7.) click "Add" and select Program choose the shortcut file > select Event and choose "The device woke up" and click "Add"

8.) Select "Start Up Program" (Forth Icon that from left to right)

9.) click "Add", find the shortcut file.

10.) Close MemMaid 1.5 program and soft reset.

The problem is that the link in notification queue after standby are delete!

Help!!

Tanks

[masr1979]

How 'bout if you go to the \Windows\startup folder, how many omapclock shortcut entries are there? seems to me you would be creating 2 if you first put in a shortcut manually and afterwards put another one in with memmaid, after you edit the shortcut and place it in the startup folder you should use memmaid only to set it to run "When the device woke up", as far as I remember you don't need to add another startup shortcut. I could be wrong. Try it out and post back, you seem to be doing everything correctly except for that, so let's hope it is only that and that you'll get it to work. Good luck!

[hamleto]

How 'bout if you go to the \Windows\startup folder, how many omapclock shortcut entries are there? seems to me you would be creating 2 if you first put in a shortcut manually and afterwards put another one in with memmaid, after you edit the shortcut and place it in the startup folder you should use memmaid only to set it to run "When the device woke up", as far as I remember you don't need to add another startup shortcut. I could be wrong. Try it out and post back, you seem to be doing everything correctly except for that, so let's hope it is only that and that you'll get it to work. Good luck!

I have only one shortcut in MemMaid StartPrograms!
I have also try to locate shortcut in /windows,but the problem is the same:
AFTER SOFT RESET OMAPCLOCK'S NOTIFICATION QUEUE ARE DELETE IN MEMMAID and clock return to standard value :(

[masr1979]

Well I've got two suggestions. 1- Delete all shortcuts, soft-reset your device, and repeat the process. Only this time place the shortcut in the \Windows\startup folder manually and only use memmaid to set it to "when de device woke up", soft-reset and verify. 2- download smartkey from http://forum.xda-developers.com/viewtopic.php?t=41060&highlight=smartskey place smartskey.exe and smartskey.ini in the same folder as you put omapclock.exe, before you do that though, you need to open up smartskey.ini with notepad and edit it. I'm not 100% sure smartskey is compatible with the prophet, but I don't see why not, read thru the thread a bit to make sure in any case, here is the part you need to edit

; set OMAPCLOCK to the clock if you want to use omapclock and automatically
; set the clock speed after wakeup, you should put OmapClock.exe in the same
; directory of smartskey.exe
; REMEMBER TO REMOVE ';' BEFORE THE LINE TO ENABLE IT
OMAPCLOCK=264 <------ Put your speed here and delete the semicolon ( ; ) hamleto, and of course delete this little line
;REMOVEDUPSDDAEMON=0
;STARTMENUMETHOD=0
;DUP=0
;DDOWN=0
;DRIGHT=0
;DLEFT=0
...........

Well again good luck, I'm at my wits end, but let me know if it worked out for you. Later!

[danpei]

How to check the speed after o/c? I check on setting the speed still same.
thanks