View Full Version : Question after BigStorage...
jedhonx
21st May 2006, 04:41 AM
I've done the big storage patch on my Magician. And I understand that if you restore files from a backup made when one didn't have big storage, one is likely to have just wasted time on the patching as the file structure would revert back over-writing some (hex?) values, with the possibility of losing access to the Storage folder completly.
So here's my question. would it work both ways? Say I re-flash my Magician with the ROM it came with, and that I have a backup from a ROM that has the BigStorage patch, and then restore from that backup, what would happen? Will the backup from BigStorage ROM override the shipped ROM's file structure? Or will it just mess things up?
I realize that this may seem pointless to most users. But I am missing a registry key for a Bluetooth function (syncing via Bluetooth, and I think it's just one key...). Let's just say I don't have the guts to re-flash my Magician two more times (back to shipped ROM, get what I need, then to BS ROM) given the risk posted above.
Could anyone shed some light on my question?
Thanks
oltp
21st May 2006, 09:48 AM
Don't know what kind of backup you're referring too. Is it a rom-backup then yes you're reverting to normal storage. With a RAM data backup you're not going to write to ROM & cannot change the addresses you mention.
Did you load the BT patch ext-rom cab after the boot or do you have plain WM2003Se now?
My advice: load the cabs with patches from your ext-rom.
M
jedhonx
21st May 2006, 11:44 AM
Oh sorry, I forgot to mention that but i think you answered my question. Suppose I made a backup (with the BS ROM) using Sprite software, and I re-flash my Magician with the shipped ROM that I backed up, and restore from the Sprite backup, what would happen? And given your answer, I'm supposed to expect that the Sprite backup is not capable of changing the addresses, right? So then I'd have the BS registry settings, shortcuts, and blahblahs, but only 7.6MB useable memory in the Storage folder?
To answer your question, yes I did load the CAB files I needed from the ExtRom including BTHUSB_PATCH_AKU26.CAB (which I think is for Bluetooth?) but to no avail, as I've lost the capability to sync using Bluetooth ever since I did the BS patch. I even loaded that CAB file a second time just in case, but still to no avail. (Note that the hardware works though. I can make a device pairing and all that...)
I'm trying to avoid re-flashing my Magician twice just to get that registry key as that would be my last resort. Hahahaha
In any case, here's a list of the CAB files I loaded, if it matters.
Band_Select_Enable.sa.CAB
BTHUSB_PATCH_AKU26.CAB
CAB-ArcsoftMMS-2.0.022-Magician-O2Asia-ENU-21Mar05.CAB
CAB-Customization-Magician-O2AsiaWWE-31Jan05.sa.CAB
Caller_ID_Magician_Generic_WWE_RC13.CAB
CameraWizard_O2Asia_Customize.CAB
CV2.41.386_wwe.CAB
default_103133.sa.CAB
DelAddStarMenu_092404.sa.CAB
DialerSkin_Landscap_091104.sa.CAB
DialerSkin_Portrait_091104.sa.CAB
Fix_dual_SIM.sa.CAB
JMM101257_wwe_1004.CAB
O2_Base_v103116.sa.CAB
O2_Default_103133.sa.CAB
O2Auto.sa.CAB
PhonePad_Magician_Generic_WWE_RC12.CAB
SmartDialing_Magician_Generic_WWE_RC13.CAB
Version_WWE_111922.sa.CAB
Including 2 CAB files for my service provider. Is there anything else that I could have missed? I used the config.txt in the ExtRom folder as basis for the CAB files to install.
PS: I'm not quite sure what you meant by 'patches' from my ExtRom...
oltp
21st May 2006, 12:54 PM
With the 'patches' I meant some of the cabs you installed from the ext-rom, eg for BlueTooth, battery & camera.
I'm only using usb for syncing, so I'm unable to confirm BT sync works for me, no BT hardware on my PC. Still you got a strange prob. Did you try a hard-reset & are you using the latest Sprite version?
M
jedhonx
21st May 2006, 05:04 PM
I've done one hard-reset a week after I flashed my Magician with the BS ROM so that I could test a previous Sprite backup (Sprite ver 3.2 if that helps), since I was just curious as to if the backup would fully restore everything [and it did btw].
Curious, what would the latest/lower version of Sprite backup have to do with my problem?
oltp
21st May 2006, 10:51 PM
With previous versions I sometimes got notifications that the registry backup/restore wasn't fully successful.
Sprite will restore all RAM data & the \Storage data not the size, so you could end up with a partial restore when you try to restore > 7MB to the standard \Storage folder.
Did you check all Act.Sync settings on your Magician, guess you probably did a 1000 times?
Regards, M
jedhonx
22nd May 2006, 09:03 AM
Yes I did check all the Async options on my Magician. I did run into a problem regarding Bluetooth with the Magician's Async and speculated that I was missing a registry key. Check out the post I made here regarding that http://forum.xda-developers.com/viewtopic.php?t=50937.
After getting boh113's registry file, the `Bluetooth option came back but still wouldn't work. So I'm assuming that the addresses don't match with my Magician.
I gave it some thought and the only way I came up with to get back the Bluetooth functionality was this:
1) re-flash my unit with the ROM it was shipped with
2) deal with the \Storage folder problem if any
3) extract the whole bare registry
4) re-flash my unit with the BS ROM
5) merge the extracted registry (I'm not sure if this'll cause unforeseen problems)
6) pray
hahahahaha! Hopefully I'd get back Bluetooth syncing. Of course I'd try to avoid doing this as this would be my last resort. I will most likely need a whole day for this, and I doubt I can do that this week. Might try next week if I put up enough guts.
I MIGHT be missing some DLL files in \Windows although I doubt that. But it's still a possibility..
I do have one more question.
I assume I did the following successfully since my Magician works:
a. shipped ROM backup + dumping
b. hex-editing on the shipped ROM to make it a BS ROM
c. flashing with BS ROM
So here's my question, though I see it to be silly. Would it be safe to re-flash my unit with the BS ROM (that I patched) instead of doing it again from scratch (i.e. the 6-step procedure I listed)? My unit will still have the 20+MB \Storage folder right?
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.