View Full Version : Where are all the bluetooth functions (esp. File Transfer)?
naujoks
27th May 2006, 01:36 PM
The only bluetooth functions I get on my MDA Pro are Headset and Serial Port. I'm desperate for File Transfer... does anyone know how to get it? Thanks!
Bonzo
27th May 2006, 01:52 PM
They are there, just not visible..
Try sending a file to your Universal through BT, and it shall recieve it..
Make sure that the beam settings are "Accept all inncoming"
simon_darley
28th May 2006, 12:02 PM
if you use the inbuilt file explorer on any file, you can press and hold, then select beam file. if bluetooth is on, it will:
1. search the infra red port
2. Search all surrounding devices with bluetooth on, and discoverable.
then you can just select where you want it to go.
avensis
29th May 2006, 08:53 PM
Does anyone know how I could transfer a file from my Qtek 9000 to my Nokia N70 (Symbian OS) using BLUETOOTH. When I pair the two I get "Dialup networking” only I cannot find a way of transferring files from one device to the other. Please include step by step instructions if you know how.
Thanks
richardlai
29th May 2006, 09:38 PM
Does anyone know how I could transfer a file from my Qtek 9000 to my Nokia N70 (Symbian OS) using BLUETOOTH. When I pair the two I get "Dialup networking” only I cannot find a way of transferring files from one device to the other. Please include step by step instructions if you know how.
Thanks
1. Enable Bluetooth on both devices;
2. Open File Explorer, go to the desired file, hold the stylus down (like right click on a PC) and choose "Beam File" (this works with Bluetooth as well as Infrared)
3. Choose Nokia N70 or its assigned device name when you see it on the list
avensis
30th May 2006, 12:22 PM
Yes thanks i tried doing what you suggested, but it sent the file from the Qtek 9000 to the N70 -> recieved it as a message and i could not save the actual file anywhere on t he N70?
richardlai
30th May 2006, 01:38 PM
Well, what does the message look like? What type of file are you trying to transfer? I would expect you be able to save an attachment or something similar. I'm afraid I'm not familiar with the Symbian OS.
elbowz
30th May 2006, 02:59 PM
They are there, just not visible..
Try sending a file to your Universal through BT, and it shall recieve it..
Make sure that the beam settings are "Accept all inncoming"
Either I'm doing something stupid here, but.. if I send a file from my desktop to my MDA Pro (BT enabled, accept incoming beams enabled) I just get a message saying 'ftp service not found on target device'
If I explore available services I can see DUN and Voice Gateway... am I missing something?
6680abhi
30th May 2006, 03:55 PM
Yes thanks i tried doing what you suggested, but it sent the file from the Qtek 9000 to the N70 -> recieved it as a message and i could not save the actual file anywhere on t he N70?
Im very familiar with symbian OS but new with PPCs so should be able to help!
Install a file explorer such as fexplorer onto your n70. Fexplorer on the root page has a mail option, and when you enter it, you can see all the files recieved via btooth/mms. Copy the file and paste it to your desired location using fexplorer. Alternatively, if the file explorer you use doesn't have the "mail" option on the home of the sw, visit x:/system/mail (x= c or e depending on where messages are stored) and browse throygh the folders until you find the attachment and paste it to where you want.
avensis
30th May 2006, 07:32 PM
Thanks very much, i did what you said, but the mail opton was not there, instead i found the Inbox directory and there was what i was looking for, so thanks again...
joey jojo
31st May 2006, 02:06 AM
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
joey jojo
31st May 2006, 02:07 AM
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
c0rnholio
31st May 2006, 10:54 AM
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
something like this? http://www.silentservices.de/btCrawler.html
avensis
31st May 2006, 03:21 PM
I check BtCrawler it does not let you transfer files between device, what i am looking for is something like a file explorer where (once two devices are connected via BT) then one can copy files (using a fileexplorer type of interface from one location in device A to another location in Device B. Veyr easy stuff really but cannot do it anymore in Qtek 9000 WM5, whereas in my Blueangel WM2003 i used to have that exact functionlity, and i used to do it by transfering files from my Cellular camera to my PDA.
c0rnholio
31st May 2006, 03:47 PM
...what i am looking for is something like a file explorer ...
OK, got you this time. WM5 only supports Obex-Push (trabsfering V-Cards and stuff). It currently does not support Obex-FTP which is exactly what you are looking for. Maybe some future updates from M$ will add this functionality, so I hope...
cheers
avensis
31st May 2006, 09:31 PM
Thanks, but if you find any software that provided the " Obex-FTP" on the WM5 PDA could you please send me a message.
daven
1st June 2006, 01:42 PM
isnt it possible that we can update the bluetooth stack to the widcomm one?
joey jojo
6th June 2006, 01:48 AM
isnt it possible that we can update the bluetooth stack to the widcomm one?
I'd like to know if this is possible.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.