connecting A2DP Bluetooth headset with one button...???

[rodigezstyle]

i hate the process to connect with my bluetooth headset

Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo

gives any app to do this with one klick or one button ???

[nolodude]

What headset are you using? I have Logitech wireless stereo headset. I connect it like this:

1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected :)

[zamsky]

What the button?
I have four on my Sonorix :roll:

[nolodude]

Only three on Logitech and two of them are volume controls so it's easy ;)

[dadarkmcse]

This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?

Thanks,
Jon.

[Sleuth255]

It's an A2DP issue. Some headphones connect, others do not.

The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.

[dipeshb]

I have to go thru the same process to get a2dp wireless stereo working.

Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo

I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..

[rodigezstyle]

What headset are you using? I have Logitech wireless stereo headset. I connect it like this:

1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected :)

I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..

[Sleuth255]

This issue is very likely one of the reasons why A2DP was never officially released.

[rodigezstyle]

i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...

[dadarkmcse]

This issue is very likely one of the reasons why A2DP was never officially released.

That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location... ;)

[Sleuth255]

no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).

[lewcamino]

Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice :D However I do have to go and connect them (sux).

So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.

Later; Lew

[Megapaul]

I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620

[JNGold]

I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.

Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!

Does anyone have any idea why I would not be able to get the H to work?

[zehn]

Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??

regards
zehn


My Moto works very well and connect automatic...

[richardfv]

hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....

uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth

[Bolik]

doesnt work :(

[archaeopterix]

http://www.teksoftco.com/index.php?section=freeware

here is a2dp toggle

[smartin]

Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono :(.
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono :(

Is that my issue or general ?


I run MX6r3


cheers