operator code killed?????

[yacyd]

hello
i patched my ba several times but yesterday i got the failure message country code wrong.

i run getdivicedata and get this info:
P H 2 0 B W W E AT%CID?  5 . 0 3 . 0 2 0.0 1.13.00 % 4

how can i "repair/fix" my operator code

thanx

[hasanj4]

Your operator is 'T%CID?'
It is fine - same as mine
This proceedure is all over the forum.

This is what I do:

1) create a new file on ur desktop C drive - call it ROM
2) copy and paste NK.nbf and setoperator files to this new file
3) start - run - type 'cmd' - ok
4) type 'cd\'
5) type 'cd rom\'
6) type 'setoperator T%CID?' - enter
7) your NK.nbf file is now changed to your operator code
8) copy and paste NK.nbf back to your file
9) and flash your ROM using BaUpgradeUt

to flash your ROM:

1) press softrest+pwr+record button at the same time
2) you will see a white screen on your BA with 'SERIAL' letters on top
3) put BA in cradle and allow few seconds for the computer to pair with it
4) run BaUpgradeUt to flash your ROM

Should work

[Yaantra]

No dude, its not your operator code thats gone wrong...How did you set the operator in the first place? if you used the setoperator, did you enter the 8 digit alpha numeric code, ie. T-MOB001 or XGULA001 or whatever ur code is?
Well, what i would suggest is that you open the Setoperator.bat file using Notepad, make sure it is for you device and language. Then change the operator code using the normal procedure.
Now, use xda3nbftool to check that the values have been set correctly (hint: see how the commands display in DOS when you do the setoperator procedure)

Hopefuly this might help! Good Luck!

Yaantra

[Midget_1990]

all my device data became scrambled during a rom update once, i just reflashed again, using the no_id tool and it went back to normal.