Mio P550 / P350 ROM upload

[ziksinski]

Hi,

First of all I was using "search" but I didn't find anything special about mio P550 / P350. I know that this forum isn't for mio but mostly for HTC. But maybe someone can help me.

Is there any software which can "pull out" ROM image to my PC? Lot of inquisitive users accidentally deleted ROM in their Mio's (at boot loader they chose Low Level format).

After this operation they are still able to enter boot loader mode. There is an option: Image Upgrade Tools:

0=Image by USB
1=Image by SD/MMC

The problem is that we don't knot how to copy image from healthly P350/P550 to SD or PC by USB

There is also other menu: DUMP Tools

0=Dump WholeIMG_CKS (if we chose this nothing happens, only "Image_CKS:0x1ddc3aa8" apears on the screen). PC discovers mio as: SEC S3C2410X Test B/D and Windows cannot find any driver for this.
1=User Store to SD (this is nothing but backup of all data in P350)
2= SD to UserStore (restore of previosly backedup data)
3=Mark Bad Block (50MB) - ??

Do you have any ideas how we can dump image?

Regards.

[lefteris]

anyone have the rom from the mio p550?

[XDante]

Yes I have. I make Dump.bin. Option:

UBOOT P550: Oscar250/260AB_UT_R12
4 = Dump Tools -> 1 = User Store to SD

ROM Version: R00.3.0109.0502
Language: Spanish

Dump File link:
Oscar250/260AB_UT_R12(R00.3.0109.0502) (http://save.raidrush.ws/?id=ffe12129635a62d8cd7ed5fcb9cd00cf)

Retail Full Rom (English)
P350/550 rom update (MioP550-Osc260AR05_P09.zip - English) - Link Protected (http://lix.in/0b6ebd)
Upgrate Tool - Link Protected (http://lix.in/bbdd0b)

[RockDr]

Hi ziksinski.
Did the solution given by XDante work? I am currently considering going down this route to backup the ROM on my new P550 to allow me to restore it at a later date if all goes horribly wrong!
I also came across the following at this address: http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewtopic&p=319907

hi, mio_pda
Follow the procedure:
Connect the mio p550 to PC
1.put the Button of the PDA in ON position
2. hold the joystick downward and press the reset button
3.choose “Image Upgrade tools”
4.choose “0=Image by USB”
5.intall the usb driver (PC require the drivers). The driver in the folder “USB driver”
6.open the software “dnw5.0e”
7.(if you want to make a test of connection USB, click the” USB port/Statute”. If all is ok go to step 8
8. click “USB port/transmitted” and to show the way of the file “MioP550 - Osc260A R05_P09.nb0”
9.press the reset button to restart the mio p550.

Anyway, I hope that this proves useful.

[cid254]

DONE!!! With the following procedure i can repair my p350 lowlevel formatted.
The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.

MITAC P350 flashed with P550 fimware fully working!

Many thanks also to pdaclub.pl!

So:

1) Download this file http :// www . klubin.hrleon . com / pda / ROM_do_p550_rg . zip (delete space)
2) Boot your mitac in bootloader model (down arrow pressed)
3) Go to "0=Image Upgrade Tools"
4) Then go to "0=Image by USB"
5) Decompress the file to a folder and open dnw.exe
6) Check Configuration->Options. Set USB Port Download address at 0x3000000
7) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
9) Wait for finish flashing procedure (it take about 2 minutes).
10) Disconnect the pda and make hard reset
11) You done!!!

I tried many rom but this is the only that don't make flashing procedure hang at 99%.
The rom contain only English software.

Now I'm very happy and looking for italian one!

BR

cid

[AN7 OverClocker]

Do you have enabled the extra features of P550?

[iyesil]

Hi, I have bought a MIO P550. Trusting official web site of Mio, I have downloaded the patch (battery) and installed it. Now I cant have my lovely MIO passed after MIO splash screen.

I have tried everything that I found on this forum. It was very helpfull. The last I have tried the procedure that RockDr describes. However, nothing has been succeded :-(

Should I perform low level formatting? If I do so, will I be able to install Windows Mobile 5.0 again?

Your kindly help is needed. Thanks..

Ibrahim.

[cheetablaze]

Yeah.. go ahead and do a low level format, it will take a few minutes. Then upload the rom from the computer via USB. It should automatically boot right right up. I did the exact same thing with the power patch because it doesn't give any kind of warnings.

http://www.4shared.com/file/20669884/f669c396/ROM_do_p550_rg.html

Incase the other people's website go down here is the one I downloaded and used on my P550. I haven't had one issue with it yet and it's been over a month. Only issue you will have will be with miomaps, Each install CD that comes with the P550 package has a serial that is already in your ROM. This new rom will make your MioMaps come up with a "HardwareIdChanged" error. No biggie though, you can download a cracked version of it or just get TomTom6 *100x better and easier to use*

Good Luck!

[bub181]

what's the advantage of flashing the P350 with the P550 rom? do we get extra features?

[cheetablaze]

No, from what I know there isn't any differences except Wifi and Bluetooth support. I just really wish they would push this model to WM6, I only paid 300 bucks this for model and Mio only cares about updating their crappy MioMaps program, so probably not. I can always dream.......

[el_gery]

hi ppl,

The best way to upload a new ROM image from the SD , is to change the file name to winceimg.bin after formatting the SD to FAT16.
1.connect the device to power
2. enter boot loader by pressing the joystick down and reset together
3. enter to upgrading image
4. choose upgrd from SD

thanks.

Gery

www.nextlab.co.il

[goodoane]

I have at this moment a dead brik(Airis T620) i made some mistake and I killed the bootloader.
Did anyoane had a bootloader file of MIO P550???

I need help to rewrite the bootloader of my device Airis T620(MIO P550 clone).Any help its welcome.I can build a jtag cable ,but i need a bootloader and some tips how to do this.
Thanks.

[zibias]

hi ppl,

Ive been working in the Acer PDA lab for the last year, and we repaired Yakumo devices too.

The best way to upload a new ROM image from the SD , is to change the file name to winceimg.bin after formatting the SD to FAT16.
1.connect the device to power
2. enter boot loader by pressing the joystick down and reset together
3. enter to upgrading image
4. choose upgrd from SD

thanks.

Yakumo deltax or Yakumo deltax 5 ?:confused:

[yahya_c]

The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.
cid

I needed to flash my WM5 ROM for my Mio P35o to convert its language from dutch to english and even after following what you listed, I was having the same (stuck at 99%) problem.

I realized that it was probably because I was doing all this in Windows Vista and because of some problem, probably DNW was not closing the connection after the ROM image transfer did it keep getting stuck at 99.

I shifted to XP and the whole thing worked, maybe because the test bed driver I was using was written for XP... in any case, I'm guessing the 99% problem is not due to the ROM but probably something wrong with the host machine driver/software that doesnt end the transfer properly.

-Yahya Cheema

[Genuis]

Nothing seems to work
in menu dump tools
i get only the text Image_CKS :0x188dfaea
and nothing hapends
if i choose user storage to sd i get stuck with sd mount succesfuly

who knows how to make a dump from the image??

[jureba]

Yes I have. I make Dump.bin. Option:

UBOOT P550: Oscar250/260AB_UT_R12
4 = Dump Tools -> 1 = User Store to SD

ROM Version: R00.3.0109.0502
Language: Spanish

I`m upload now...

Other Rom....

P350/550 rom update (http://rapidshare.com/files/4983030/MioP550-Osc260AR05_P09.zip.html)
Upgrate Tool (http://rapidshare.com/files/4983444/Upgradetool.rar)
You say that upload a firmaware of your Mio P550 (Oscar250/250AB_UT_R12) where is the link?

[Nixeus]

Hello everybody!


I'm a user of mio p550 (french).
I want to upgrade my mioP550 to wm6 !!!
Anyone has a solution about upgrading mio p550 tow wm6 ?

Thanks a lot !

[romulus.berdei]

Hi guys,

I tried to make an update (power pack) to my mio from mio website and after the device was reset it I couldn’t start the device anymore.
I follow all the step posted on this web site but the loading of the image MioP550 - Osc260A R05_P09.nb0 hanged always on 99% both in image Upgrade Tools and UBOOT Upgrade Tools.

Could anyone from you give an image of Oscar250/260AB_UT_R13, I guess didn't work because of the incompatibility between versions.

Thanks,

[almos.dinnyes]

Hi All,

I've made a low level format, because I couldn't unlock the the screen (soft reset was not enough).

Now I am not able to start my PDA. When I push the reset button the blue lamp flashes, but that's all. I tried to push the joystick and the reset together, but nothing.

Please, help me, what to do!

[cosmabgd]

hi ppl,

Ive been working in the Acer PDA lab for the last year, and we repaired Yakumo devices too.

The best way to upload a new ROM image from the SD , is to change the file name to winceimg.bin after formatting the SD to FAT16.
1.connect the device to power
2. enter boot loader by pressing the joystick down and reset together
3. enter to upgrading image
4. choose upgrd from SD

thanks.

he want to say to change the Osc260A R05_P09.nb0 file name from rom directory to winceimg.bin and procede with
formatting the SD to FAT16. copy to the sd the file renamed
1.connect the device to power
2. enter boot loader by pressing the joystick down and reset together
3. enter to upgrading image
4. choose upgrd from SD
work on the p350 p550 and clone

[sasta1111]

please kindly give me mio p350 chinese rom,thanks a lot!!!!!!

[comp_da]

he want to say to change the Osc260A R05_P09.nb0 file name from rom directory to winceimg.bin and procede with
formatting the SD to FAT16. copy to the sd the file renamed
1.connect the device to power
2. enter boot loader by pressing the joystick down and reset together
3. enter to upgrading image
4. choose upgrd from SD
work on the p350 p550 and clone

Thanks, but my first need is HOW to backup my own rom (safety first).

[XDante]

UBOOT P550: Oscar250/260AB_UT_R12
4 = Dump Tools -> 1 = User Store to SD

ROM Version: R00.3.0109.0502
Language: Spanish

Formato: WINRAR
Tamaño: 42,2 MB (44.307.621 bytes) Compressed.
Tamaño: 99,0 MB (103.833.600 bytes) Not compressed.

Dump File link:
Oscar250/260AB_UT_R12(R00.3.0109.0502) (http://save.raidrush.ws/?id=ffe12129635a62d8cd7ed5fcb9cd00cf)

The Rom backup copy was done continuing the steps described in many post that they can find in Internet. As I understood, I think that restore a P550 formatted by means of this file is not possible , but on the other hand, We nothing gets lost by try it.

Un Saludo.

[pentraks]

No, from what I know there isn't any differences except Wifi and Bluetooth support. I just really wish they would push this model to WM6, I only paid 300 bucks this for model and Mio only cares about updating their crappy MioMaps program, so probably not. I can always dream.......


Hello,

Do you mean by flashing P550 firmware to P350 it enables wifi and bluetooth on P350 which is not supossed to have?

[XDante]

Hi,

I read in many post that the Mio P550 rom (MioP550 - Osc260A R05_P09.nb0 ) work in to Mio P350. 100% functionality .

However, the wiffi not work in P350 because, the P350 haven't the necessary hardware.

A Greeting.

[Nixeus]

Hello everybody !

Here is the link of the mio p550 / airis T620 WM6 !!!!
http://dl.free.fr/lxxe4VIaq/extraitduexe.rar

1) Rename the file "temp.dat" to "dump.bin", and flash with your SD CARD :)

;) Enjoy ;)

[airist610]

Sorry Nixeus, but this is not working. I have downloaded, extracted and renamed the file. Put on SD card, booted to Image by SD/MMC. It writes MountDisk SUCCESS!!!
then
Open WholeImage ...
and remains so forewer.
I press reset, then everything get back to previous.

Second try, now using the normal way with ActiveSynch, this asks me for an activation key.

Third try, using the USB update tool DNW5.0e. This way start the download, but after 53% device reboots. Fortunately everything gets back to normal operation.
Any idea how to proceed forward?

Cheers,
Balu

[Nixeus]

Hello !

Arf, there is a problem with this roms !
This rom don't boot on the mio p550 ! Is there any developper who can look for this rom boot on the mio ??

So this rom is compatible with the mio ( the same one processor, wifi, gps....)

Please !!!

[Nixeus]

An other news, the mio p560 who is the mio p550 with wm6 is now available !

We need to finda dump, and we will able to falsh our mio p550 with wm6 !! :)

WE NEED TO FIND A DUMP OF A MIO P560 !

[hotzoman]

I bought last week a Mio DigiWalker 560 with WM 6 Classic preinstalled.It has a small list of apps not as I saw on a friend of mine's PDA with WM 5.And more - I cant use the WiFi.On my Access Point I'm using MAC Control for authentication.But on this kind of Windows Mobile I cant see the wireless card to get the MAC address.I know it is in because it can see my wireless AP SSID but without MAC.... So I need a ROM Image with WM 6 Professional......if it exists,or at least a WM 5 Pro which can run on my Mio 560 ?

What to do?:confused: :confused: :confused: :confused:
Thank You!

[Nixeus]

Hello !

I think that you shouldn't flash your mio p560 on wm5 !!!
Phone the mio assistance and tell thme about your problem ! They can help you !

Nevertheless, may be it possible dump your pda and give me your dump ?
I want to create a wm6 rom for our p550 !

It will be very very nice !! :)

If you want, you can contact me at : le_merovengien@hotmail.fr

Great Thank'

[vltakacs]

I have at this moment a dead brik(Airis T620) i made some mistake and I killed the bootloader.
Did anyoane had a bootloader file of MIO P550???

I need help to rewrite the bootloader of my device Airis T620(MIO P550 clone).Any help its welcome.I can build a jtag cable ,but i need a bootloader and some tips how to do this.
Thanks.

Hi there, I have the same problem. I have tried also detaching battery for some minutes but it also did not help.

Someone pleeease help ! :(

Regards,
Viktor L. Takacs

[Nixeus]

Hello,

Can you flash your pda ?

[vltakacs]

Hello,

Can you flash your pda ?

If you ask me, then no.
If I turn on the device or reset it while holding down arrow, it does not give me the bios/bootloader/rom menu

[vltakacs]

Hi there, I have the same problem. I have tried also detaching battery for some minutes but it also did not help.

Someone pleeease help ! :(

Regards,
Viktor L. Takacs

Additional info:

This problem appeared right after selecting Mark Bad sectors (50MB) in the boot menu.
I am sure I did something wrong. Shame on me. But can somebody explain to me what I did? What did this action cause and how can I get back my bootup menu?

Cheers,
Viktor

[Nixeus]

OK,

If you can't go to the boot menu, there is a solution which consist of flashing your pda with USB, i give you the procedure:

DONE!!! With the following procedure i can repair my p350 lowlevel formatted.
The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.

MITAC P350 flashed with P550 fimware fully working!

Many thanks also to pdaclub.pl!

So:


1) Download this file : [ http://rapidshare.com/files/41274307/dnw.rar.html ]
2) Decompress the file to a folder and open dnw.exe
3) Check Configuration->Options. Set USB Port Download address at 0x3000000
4) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
5) Wait for finish flashing procedure (it take about 2 minutes).
6) Disconnect the pda and make hard reset
7) You done!!!

I tried many rom but this is the only that don't make flashing procedure hang at 99%.
The rom contain only English software.

Now I'm very happy and looking for italian one!

BR

cid

You msut download a mio p550 .nbo file (rom)

[vltakacs]

OK,

If you can't go to the boot menu, there is a solution which consist of flashing your pda with USB, i give you the procedure:

DONE!!! With the following procedure i can repair my p350 lowlevel formatted.
The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.

MITAC P350 flashed with P550 fimware fully working!

Many thanks also to pdaclub.pl!

So:


1) Download this file : [ http://rapidshare.com/files/41274307/dnw.rar.html ]
2) Decompress the file to a folder and open dnw.exe
3) Check Configuration->Options. Set USB Port Download address at 0x3000000
4) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
5) Wait for finish flashing procedure (it take about 2 minutes).
6) Disconnect the pda and make hard reset
7) You done!!!

I tried many rom but this is the only that don't make flashing procedure hang at 99%.
The rom contain only English software.

Now I'm very happy and looking for italian one!

BR

cid

You msut download a mio p550 .nbo file (rom)

Thanks, But this is only the second part of that post. The first part begins with ENTERING THE BOOT MENU then selecting image upgrade from USB
then the device gets in a waiting position for usb connections from the pc.

My problem is that I cannot ENTER BOOT MENU.

[Nixeus]

aaaa, i think that you must go here :

http://www.miousers.co.uk/viewforum.php?f=18&sid=a488fcf92e76fc7ea0a3e7039f9303c2

Good luck

[vltakacs]

aaaa, i think that you must go here :

http://www.miousers.co.uk/viewforum.php?f=18&sid=a488fcf92e76fc7ea0a3e7039f9303c2

Good luck

Thanks.

I have checked the link. They are mentioning there to enter the uboot menu.
My problem is that they are talking about a completely different model (which has a "red" button and so on...) and also that I think this uboot menu is the same that we call bootmenu, which I still cannot enter.

:(

[sonas]

I have a mio p350 and suddently, after two months of working, it is frozen now!!!

I tried everything (soft reset, etc) but nothing happened!!! It was still frozen !!!

I tried "Image Upgrade Tools" and then "Image by USB" it says "Download & Run" and then "Waiting for download" but then "cable not connected".
It does the same with Activesync from my PC. I cannot connect Mio with my PC.

Despite that USB cable is connected, nothing happens !!!
Can anyone help me please ???
What should I do?
I've also done lowlevformat so I suppose I have nothing now !!!

Please help. I am desperate!!!

Waiting for any help......

[sonas]

OK,

If you can't go to the boot menu, there is a solution which consist of flashing your pda with USB, i give you the procedure:

DONE!!! With the following procedure i can repair my p350 lowlevel formatted.
The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.

MITAC P350 flashed with P550 fimware fully working!

Many thanks also to pdaclub.pl!

So:


1) Download this file : [ http://rapidshare.com/files/41274307/dnw.rar.html ]
2) Decompress the file to a folder and open dnw.exe
3) Check Configuration->Options. Set USB Port Download address at 0x3000000
4) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
5) Wait for finish flashing procedure (it take about 2 minutes).
6) Disconnect the pda and make hard reset
7) You done!!!

I tried many rom but this is the only that don't make flashing procedure hang at 99%.
The rom contain only English software.

Now I'm very happy and looking for italian one!

BR

cid

You msut download a mio p550 .nbo file (rom)

Hi, friend,

I have exactly the same problem.
I did what you said but when running dnw.exe, at
USB port transmit > transmit it says "Cannot open USB device|" !!!!

Can you suggest anything ?

[hotzoman]

I tried to make a dump using this

http://forum.xda-developers.com/showthread.php?t=238945&highlight=invisible+rom+dumper

but when archiving the dump.bin it resulted a small file.I suppose was same as here

http://www.miousers.co.uk/viewtopic.php?t=3670&postdays=0&postorder=asc&start=15

What to do next?

[sliding]

i also need mio p350 english rom
you can follow the instrustions form below page.
http://blog.abuzant.com/hacks-cheats/2006/05/30/mio-168-firmware-update-tutorial.html

it's the same way to backup therom from pda(mio 168 or mio p350)

i use this instructions to backup my mio p350(traditional chinese rom)

after you backup p350(english rom) please share it to us,thanks

Always take a dump of your ROM before trying to flash your PDA. It may be usefull for you and others. If you want to share the result, please upload on rapidshare (for example) and send me a mail with the file reference.

Execute the osloader-1.5.6.exe tool on your PDA to take this dump.

osloader-1.5.6.exe :
http://home.scarlet.be/lataupe/osloader-1.5.6.exe

See here for instructions(same as mio 168)
http://blog.abuzant.com/hacks-cheats/2006/05/30/mio-168-firmware-update-tutorial.html

[asam_a]

i also need mio p350 english rom
you can follow the instrustions form below page.
http://blog.abuzant.com/hacks-cheats/2006/05/30/mio-168-firmware-update-tutorial.html

it's the same way to backup therom from pda(mio 168 or mio p350)

i use this instructions to backup my mio p350(traditional chinese rom)

after you backup p350(english rom) please share it to us,thanks

Always take a dump of your ROM before trying to flash your PDA. It may be usefull for you and others. If you want to share the result, please upload on rapidshare (for example) and send me a mail with the file reference.

Execute the osloader-1.5.6.exe tool on your PDA to take this dump.

osloader-1.5.6.exe :
http://home.scarlet.be/lataupe/osloader-1.5.6.exe

See here for instructions(same as mio 168)
http://blog.abuzant.com/hacks-cheats/2006/05/30/mio-168-firmware-update-tutorial.html


Can you upload your P350 ROM to somewhere ? E.g. rapidshare.

[gfdsa321]

Hello,

i have the same problem with my Airis T620. After i have flashed he doesn´t boot anymore and after a second flash i can not go anymore to the service menu :(

Has anybody an idea what to do?


Greetings Joe

[digibrain]

Hi guys,

I tried to make an update (power pack) to my mio from mio website and after the device was reset it I couldn’t start the device anymore.
I follow all the step posted on this web site but the loading of the image MioP550 - Osc260A R05_P09.nb0 hanged always on 99% both in image Upgrade Tools and UBOOT Upgrade Tools.

Could anyone from you give an image of Oscar250/260AB_UT_R13, I guess didn't work because of the incompatibility between versions.

Thanks,


Da-mi pe privat mesaj.. am acelasi PDA ca tine...

[Nixeus]

HI !

Here is a link for a wm6 rom for the mio p550 !!!!!

It will be cook from a p560 dump, but cooking for mio p550 !

http://rs351.rapidshare.com/files/90893585/Dump_P560.rar

:)

[mariusdj]

Hi there, I am new here...

First of all thanks for the help to you all..

I've got the dump files (3 *.raw files), but it is not clear how we can install it!
Do u know how to do it??

Thanks!

[vladtapes]

HI !

Here is a link for a wm6 rom for the mio p550 !!!!!

It will be cook from a p560 dump, but cooking for mio p550 !

http://rs351.rapidshare.com/files/90893585/Dump_P560.rar

:)

did you tried it in your p550???

[vladtapes]

Hi there, I am new here...

First of all thanks for the help to you all..

I've got the dump files (3 *.raw files), but it is not clear how we can install it!
Do u know how to do it??

Thanks!

same to me...
how to use these 3 .raw files?:confused::confused::confused:

[asam_a]

same to me...
how to use these 3 .raw files?:confused::confused::confused:

You can start cooking ;-)

Here you can find the Mio nb0 flashfile format description: http://www.miousers.co.uk/viewtopic.php?t=3775
The 3 files here in the P560 dump correspond to Partition0/1/2 in that description. With a hexeditor you can fabricate an MBR and an MSFLSH50 header that corrensponds to P560 partition sizes and inject P560 raw files into the nb0 file and you can flash that. And there's a chance that you brick your device ;-)

I took a look at the part01.raw and what makes me sceptic, in OEM KERNEL package P560 uses a different flash driver than P550. So hw is not necessarily the same. And the above method without further cooking might not work smoothly.

Anyway as P560 is really close to P550 in hw, the above dump can be really useful in cooking a WM6 for P550. So I believe we would need help from an experience chef to proceed ;-)

Cheers,
asam

[vladtapes]

You can start cooking ;-)

Here you can find the Mio nb0 flashfile format description: http://www.miousers.co.uk/viewtopic.php?t=3775
The 3 files here in the P560 dump correspond to Partition0/1/2 in that description. With a hexeditor you can fabricate an MBR and an MSFLSH50 header that corrensponds to P560 partition sizes and inject P560 raw files into the nb0 file and you can flash that. And there's a chance that you brick your device ;-)

I took a look at the part01.raw and what makes me sceptic, in OEM KERNEL package P560 uses a different flash driver than P550. So hw is not necessarily the same. And the above method without further cooking might not work smoothly.

Anyway as P560 is really close to P550 in hw, the above dump can be really useful in cooking a WM6 for P550. So I believe we would need help from an experience chef to proceed ;-)

Cheers,
asam

ok, let's wait some answer from experienced people...

[Nixeus]

Hello,

I don't know how to adapt this rom for the p560, but it will be not very hard !

Maybe, the miousers.co.uk, who develop rom for mioa701 can help us ?

[vladtapes]

Hello,

I don't know how to adapt this rom for the p560, but it will be not very hard !

Maybe, the miousers.co.uk, who develop rom for mioa701 can help us ?

any update?

[Nixeus]

:( :( :(

No :(

We need to find a solution, we hope a wm6 rom, and we have just to adapt the P560 rom !

How do it ??

[Nixeus]

The P560 rom is almost the same one that P550, except that the boot is different.

It is just necessary to modify the sector of boot, we have information with the top!

I cannot do it, but somebody must be able well to know to do it not?

Thank you has all!

[luckystar01]

any update?

[prpetrov]

Hi i flashed my mio p350 with the p550 rom everything ok but i lost the infrared drivers :confused: so now i want to go back to p350 software. Is there any p350 retail image rom like the p550's or is there any way to enable infrared again? Please help.

[Perinn]

Hi, i flashed my MIOP550, and i have used a ROM from this forum, and it is out of screem, someone can help me? i dont know how to fix it =(

No news about the WM6 for the P550? =)

[vladtapes]

Hi, i flashed my MIOP550, and i have used a ROM from this forum, and it is out of screem, someone can help me? i dont know how to fix it =(

No news about the WM6 for the P550? =)

I have not understood...
now you have a bricked p550 right?
Anyone has the solution?

[ady_uaic]

maybe is a stupid question, but i've lost the cd, and i need the usb drivers. where can i find them? thank you all.

P.S. Solved, with activesync

[Perinn]

I have not understood...
now you have a bricked p550 right?
Anyone has the solution?

The screem of P550 its out, almost 0,5 centimeters down... n 0,5cm at PDA screem =(

[vladtapes]

The screem of P550 its out, almost 0,5 centimeters down... n 0,5cm at PDA screem =(

did u mean screen?

[Tigerbill]

I've just discovered this site, and it's awesome ....
Thanks all for your contributions....

My question is:
Do you know where I can get the Mio P550 and 350 ROM upload files for the French WM 5 ???

Thanks in advance.

[Perinn]

did u mean screen?

The image on screem, is deslocate 0,5cm from de right side, and the image vibrate =(, n i cant find another version of the rom, only this version:

R05.30101.0331

Someone have this same problem?

[pazer]

i tried to lowlevelformat my p350.
it goes well.
now, i have been downloaded the rom from this forum and ran the DNW program
when i try to transmit the progress bar isnt moving at all

the pda is connected.
i says ok o the computer and on the oda itself
http://img237.imageshack.us/img237/5341/31680101kd9.th.jpg (http://img237.imageshack.us/my.php?image=31680101kd9.jpg)

[daivatam]

how I could use the 3 raw file for p560 to reflash my dead p560 ?


cum pot folosi cele 3 file raw din dump-ul de p560 ca sa repun sistemul pe p560 meu care a murit cand am incercat de asemeni sa fac un dump rom....care este procedura prin care sa scot o imagine rom flashuibila din cele 3 raw


merci
thanks

[daivatam]

you should hard restart your pda and enter by buttons combination in service menu, your computer will ask for drivers..install "SECdriver" then select wince update - update by usb and then start dnw transmision, another method is to put on sd card the file renamed to winceimg.bin and another created file "winceimg.cks"


the cks file shold be that form:

binSize : 16155144 /this is the size of winceimg.bin reported by windows
checksum: 0x668BA555 /this is the checksum of winceimg.bin generated by for example winhex

[pazer]

well thanks for the answer but...
the progress bar goes till the wnd on DNW
but on the pda itself it says:
Recieved 6%

and it stuck on this.

[daivatam]

then the image you try to put is not working....you have to select update wince by usb not update uboot by usb........

[pazer]

thats what im doing
the image is what i have downloaded from here
MioP550 - Osc260A R05_P09.nb0

on the DNW im choosing:
USB Port > UBOOT(WINCE500) > UBOOT

ON the pda im choosing image update > by usb

[daivatam]

in the dnw you should chose transmit, in the pda update wince by usb if u have this option...In the p560 model that is the option in loader menu

[pazer]

this is the menu on the pda
image upgrade tools
uboot upgrade tools
gps tools
bt tools
dump tools
memory test
lowlevelformat

[prpetrov]

I've just discovered this site, and it's awesome ....
Thanks all for your contributions....

My question is:
Do you know where I can get the Mio P550 and 350 ROM upload files for the French WM 5 ???

Thanks in advance.

French rom:
http://rapidshare.com/files/104358735/Winceimg.rar

[prpetrov]

Hi you can back up your rom following the instructions here:
http://www.modaco.com/index.php?act=Print&client=printer&f=143&t=255064 You will get 3 .raw files - part00 , part01 and part02 please upload it somewhere and post it here. Thanks in advance. I look for p350 engish rom.

[vladtapes]

Hi you can back up your rom following the instructions here:
http://www.modaco.com/index.php?act=Print&client=printer&f=143&t=255064 You will get 3 .raw files - part00 , part01 and part02 please upload it somewhere and post it here. Thanks in advance. I look for p350 engish rom.

became dead discussion?

[cerredao]

Yes I have. I make Dump.bin. Option:

UBOOT P550: Oscar250/260AB_UT_R12
4 = Dump Tools -> 1 = User Store to SD

ROM Version: R00.3.0109.0502
Language: Spanish

Dump File link:
Oscar250/260AB_UT_R12(R00.3.0109.0502) (http://save.raidrush.ws/?id=ffe12129635a62d8cd7ed5fcb9cd00cf)

Retail Full Rom (English)
P350/550 rom update (MioP550-Osc260AR05_P09.zip - English) - Link Protected (http://lix.in/0b6ebd)
Upgrate Tool - Link Protected (http://lix.in/bbdd0b)

-------------------------------------------------------------------

PLEASE LINCK, ROM Version: R00.3.0109.0502
Language: Spanish
NECESITO ESA ROM EN ESPAÑOL,

camporman@hotmail.com

[molesaied88]

is this possible to do on a Magellan Roadmate 2000? thaks in advance

[prpetrov]

-------------------------------------------------------------------

PLEASE LINCK, ROM Version: R00.3.0109.0502
Language: Spanish
NECESITO ESA ROM EN ESPAÑOL,

camporman@hotmail.com


Thanks for the links but this is of no use to me.

[Nixeus]

SO, have you news about hwo to obatin nb0 files form the 3 raw files of the mio p560 dump ?

thanks!

[marasaar]

anyone have the rom from the mio p550?

file WinCEIMG English for Mio P350-P550 http://depositfiles.com/files/5300536

ver R05-3-0101-0331 language english
:)

[wallas]

He!
Me P550 don't boot and don't load service menu (reset + arrow down) do you know if is possible reset it? Thank you

[marasaar]

Hard Reset?

[nnannos]

I need the eng rom for MIO P550 but the P13 does anyone have it?Please someone make a dump and upload it please

[tony350]

DONE!!! With the following procedure i can repair my p350 lowlevel formatted.
The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.

MITAC P350 flashed with P550 fimware fully working!

Many thanks also to pdaclub.pl!

So:

1) Download this file http :// www . klubin.hrleon . com / pda / ROM_do_p550_rg . zip (delete space)
2) Boot your mitac in bootloader model (down arrow pressed)
3) Go to "0=Image Upgrade Tools"
4) Then go to "0=Image by USB"
5) Decompress the file to a folder and open dnw.exe
6) Check Configuration->Options. Set USB Port Download address at 0x3000000
7) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
9) Wait for finish flashing procedure (it take about 2 minutes).
10) Disconnect the pda and make hard reset
11) You done!!!

I tried many rom but this is the only that don't make flashing procedure hang at 99%.
The rom contain only English software.

Now I'm very happy and looking for italian one!

BR

cid
Great job, following your instructions I saved my MIO P350.
The only problem is the english version of the ROM, have you found the italian one?
Thanks a lot.

[Claudiomaracaja]

The image on screem, is deslocate 0,5cm from de right side, and the image vibrate =(, n i cant find another version of the rom, only this version:

R05.30101.0331

Someone have this same problem?


I have the some problem, my mios is a p550b, i think is your case. I have other p550b and screen is ok, how can i get the rom of another ? i have a dump.bin of p550b, how to converto to nb0 ? can you help us ? i can upload to you the dump.bin (of p550b).

[systemz]

http://airist620.positifforum.com/le-t620-en-general-f5/ca-c-est-fait-rom-wm61-pour-airis-t620-t2746.htm

[Baron1971]

Has anyone a WM5 Rom in german Language? Thanks in advance.

[prpetrov]

http://airist620.positifforum.com/le-t620-en-general-f5/ca-c-est-fait-rom-wm61-pour-airis-t620-t2746.htm

ftp://airisCrashOver:CrashOver@pikeupe.no-ip.com:2121/ROM%20WM6.1%20MIO%20P550%20350/Rom%20wm6.1%20ENGLISH%20for%20Mio%20P550-350%20v1.5b%20by%20CRashOverHead.rar

Cannot download it link is not working for me :(
Maybe it is only for french people. :(:(

[Claudiomaracaja]

Someone can help-me to recompile my original rom (P550B - "Oscar 270a_ut_r02") ?

I dont know how to recompile raw files on a winceimg.bin, i put here the link of my original rom:

http://www.megaupload.com/?d=ZLPCD3AO

[andu001ro]

I have the some problem, my mios is a p550b, i think is your case. I have other p550b and screen is ok, how can i get the rom of another ? i have a dump.bin of p550b, how to converto to nb0 ? can you help us ? i can upload to you the dump.bin (of p550b).

Hy!:):):)
Can U upload the dump.bin of p550b on rapidshare or megaupload ... please!!!
I’ve been looking for this version for quite of time…
Please uploaded somewhere … anywhere … just uploaded … pleaseeeee !!!!
10x!!

[tony350]

Hy!:):):)
Can U upload the dump.bin of p550b on rapidshare or megaupload ... please!!!
I’ve been looking for this version for quite of time…
Please uploaded somewhere … anywhere … just uploaded … pleaseeeee !!!!
10x!!
You can follow the following actions list originally posted by cid254. It works, the ROM is in english. (I'm still looking for the italian version !!).
The USB driver for the PC must be installed before to connect the PDA, you can find it here http://poi.betterstore.com.au.

1) Download this file http :// www . klubin.hrleon . com / pda / ROM_do_p550_rg . zip (delete space)
2) Boot your mitac in bootloader model (down arrow pressed)
3) Go to "0=Image Upgrade Tools"
4) Then go to "0=Image by USB"
5) Decompress the file to a folder and open dnw.exe
6) Check Configuration->Options. Set USB Port Download address at 0x3000000
7) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
9) Wait for finish flashing procedure (it take about 2 minutes).
10) Disconnect the pda and make hard reset
11) You done!!!

[Claudiomaracaja]

Hy!:):):)
Can U upload the dump.bin of p550b on rapidshare or megaupload ... please!!!
I’ve been looking for this version for quite of time…
Please uploaded somewhere … anywhere … just uploaded … pleaseeeee !!!!
10x!!

Ok i have a original rom of p550b, i try to converto on nb0 but i don't know how, if you know please show-me how to do.

link of raw files of P550B: http://www.megaupload.com/?d=ZLPCD3AO

[hsrp]

please kindly give me mio p350 japanese rom.

[doraku88]

Hi all,

i am a new member of XDA Forums. I have been reading and searching for WM6 roms for my MioP360.

Currently, I have chinese WM6 installed on the P360 and prefer to have the english rom. Would appreciate if someone can upload the P360 English WM6 rom :)

Also, is it possible to use the P350 rom on the P360? they are both very similar devices where the P360 has more ram/rom memory etc.

Cheers!

[Ianwyt]

As this is my first post, I'd like to say hallo to everybody on this fantastic forum.
I am not an expert on PDA's, But I exchanged an old laptop with a MIO P350 a couple of weeks ago, and I'd like to let it work as good as possible.

I began by upgrading it using Osc260a r05_p09.nb0 and, thanks to your instructions, it worked perfectly.

I installed all the programs and games that where on it again and everything works.

But after installing the SDHC.cab file I can only read and use a 4Gb SDHC card.
If I place a 16Gb card into the slot I can see all the files on it, but I can't use them, I get an error every time I want to start a program or copy a file from it.
I think it can't read behind the 4Gb limit.

Another problem is that I can't connect to the Internet.

I have a Sandisk wi-fi SDIO card (SDWSBD-000) and after installing the driver I can see it, but it will not connect to my wireless router even if I can see the five lines of the full signal it sends.

I tried to install the WM6 version of the ROM, everything works too, except the SDIO card and the SDHC driver, even if the drivers are loaded I can't use both. Only normal SD cards work.

Someone having the same problems? I would really appreciate if I could find a solution to them.

Thanks in advance, regards,

Ianwyt

[p6699]

Is there anyone has Chinese P360 ROM? I have a English P360 Rom developed by CrashOverHead and I installed it on my P350. It works! But I prefer to have a Chinese P360 Rom or someone can tell me how to get into engineering mode of P360. My friend has a P360 but I could not get into engineering mode to make a rom backup.

doraku88, can you get inito engineeing mode? I read a tHread on other forum and people said to slide the power switch to on and at mean time hold the power button on the top of machine. But it doesn't work for me.

[emporio05]

Hi there, I have the same problem. I have tried also detaching battery for some minutes but it also did not help.

Someone pleeease help ! :(

Regards,
Viktor L. Takacs

Same happened to me when T620 freeze during a user store dump and had to reset it ... couldn't enter boot menu, tried to remove battery etc. After 2h of trying usb flashing tools and stuff (non of them worked), i tried starting the device with the On-Off button (with the stylus) while pressing the joystick down (instead of Reset - joystick down) ... and suprise, it entered the boot menu !!

Trial and error ftw :)

Hope it helps,
Cheers

[gredellisse]

Hello,

During the upgrade of Mio P550 to WM6.1 (from WM5), the process crashed ! (black screen)
Now, it doesn't boot.

Can you tel me how to reload the os into the ROM or any ohter method to repair it ?

Thank you,

Grégoire

[p6699]

Hello,

During the upgrade of Mio P550 to WM6.1 (from WM5), the process crashed ! (black screen)
Now, it doesn't boot.

Can you tel me how to reload the os into the ROM or any ohter method to repair it ?

Thank you,

Grégoire

Can you still get into bootloader? If yes, upgrade the ROM as usual but better from SD card. As my experience of wm6, if I tried to upgrade from usb, it stops at 99%. But after I format my sd card and upgrade from there, it finishes smoothly. For some reason, it seems very important to format SD card first. Hope this help!

[gredellisse]

Can you still get into bootloader? If yes, upgrade the ROM as usual but better from SD card. As my experience of wm6, if I tried to upgrade from usb, it stops at 99%. But after I format my sd card and upgrade from there, it finishes smoothly. For some reason, it seems very important to format SD card first. Hope this help!

Hello,

Thank you for your response, i can't enter into the bootloader with the down arrow and reset.
How much does it take to enter into the bootloader ?
Do you have another idea or solution ?

-> It's after a low level format not a crash during the upgrade of WM.

Thank you,

Grégoire

[gredellisse]

Hello,

Thank you for your response, i can't enter into the bootloader with the down arrow and reset.
How much does it take to enter into the bootloader ?
Do you have another idea or solution ?

-> It's after a low level format not a crash during the upgrade of WM.

Thank you,

Grégoire

Sorry, i've bought it on ebay. So, now i know really what happend !
The seller did a low level format, after that she has started the flashing with the ROM of windows mobile 6.
It's during the flashing, the pda (Mio P550) got a blackscreen.
Now it doesn't boot and i can't access into the bootloader (reset+down arrow)

Somebody have an idea to help me ?

Thank you,

Grégoire

[cid254]

@gredellisse

did u have any luck in restoring mio?

cid

[cid254]

I have an idea:

try this procedure http://forum.xda-developers.com/showpost.php?p=1342702&postcount=5

with this rom http://www.4shared.com/file/20669884/f669c396/ROM_do_p550_rg.html

I know that you don't able to enter boot menu (skip those steps) but i hope that mitac did insert a low low low low low low level bootloader for emergency that start if there isn't a valid image onto flash.

cid

[gredellisse]

Hello cid,

I've tried, but nothing happend !
If you have any other ideas, please let me know.

Thank you,

Grégoire

[cid254]

I asked to a person who is in same situation (p550 black screen due "failed upgrade"*) but no luck :-(

Windows doesn't recognize any device and DNW flasher too.

The last way is discovering jtag pinout (if nixeus-crashoverhead method doesn't work).

Now i'm sitting on the river looking quiet water...

cid

*: "failed upgrade" in this case means that person get checksum error AFTER reading image process but BEFORE true flashing procedure so he soft reset p550.

[gredellisse]

Can you explain me what's the jtag pinout ? Where is it ? ...

Thank you,

Grégoire

[eminemskc]

hello i have mio P550
now i want try install wm6.1 rom first i want save my rom for restore in next case have problem!

i need ROM FOR P550 italian !!!!
or please istruction me for extract my rom

Thanks

[BOOKRA]

WM5
250/260ab_ut_r12 Eng
Thanks

[ajimfeng]

Sorry, i've bought it on ebay. So, now i know really what happend !
The seller did a low level format, after that she has started the flashing with the ROM of windows mobile 6.
It's during the flashing, the pda (Mio P550) got a blackscreen.
Now it doesn't boot and i can't access into the bootloader (reset+down arrow)

Somebody have an idea to help me ?

Thank you,

Grégoire


I had a similar, though not exactly the same problem. I'm a noob, but this is what I did:

I did a low level format and flashed crashoverhead's WM 1.6 ENG v1.5b ROM (winceimg.bin) from my SD card. It (supposedly) flashed successfully, but when I did a soft reset to restart the device -- nothing.

Did a soft reset and tried to get back into the bootloader about 20 times -- nothing.

Cried because I thought I bricked my device.

Eventually got it to work again this way:
1. Turned off the master power switch (at the bottom of the device) for 1 minute, then switched it back to "on."
2. Hold the joystick to the "down" position and hit the soft reset button. I kept holding the joystick down and magically the bootloader came back on.
3. Inserted my SD card with a fresh copy of Crashoverhead's WM 1.6 ENG v1.5b ROM (winceimg.bin) and reflashed the device. Again, according to the screen, it flashed successfully.
4. Soft reset to restart the device.
5. Another black screen -- started to cry again.
6. After about 60 seconds of me crying and not touching the device, the Mio startup screen magically appeared and the device succesfully started in WM6.1.
7. I've now successfully flashed it with the OEM ROM and the WM6.1 ROM. Turns out I wasn't waiting long enough for the device to restart after flashing the ROM. Each time, it takes FOREVER to reboot with the new ROM.
8. Did a little happy dance, then bitched again because the device still does not recognize SDHC cards, which is the whole reason I upgraded the device toe WM6.1.

I can't emphasize the importance of the crying :D

Hope it works for you.

[betoNL]

I had a similar, though not exactly the same problem. I'm a noob, but this is what I did:

I did a low level format and flashed crashoverhead's WM 1.6 ENG v1.5b ROM (winceimg.bin) from my SD card. It (supposedly) flashed successfully, but when I did a soft reset to restart the device -- nothing.

Did a soft reset and tried to get back into the bootloader about 20 times -- nothing.

Cried because I thought I bricked my device.

Eventually got it to work again this way:
1. Turned off the master power switch (at the bottom of the device) for 1 minute, then switched it back to "on."
2. Hold the joystick to the "down" position and hit the soft reset button. I kept holding the joystick down and magically the bootloader came back on.
3. Inserted my SD card with a fresh copy of Crashoverhead's WM 1.6 ENG v1.5b ROM (winceimg.bin) and reflashed the device. Again, according to the screen, it flashed successfully.
4. Soft reset to restart the device.
5. Another black screen -- started to cry again.
6. After about 60 seconds of me crying and not touching the device, the Mio startup screen magically appeared and the device succesfully started in WM6.1.
7. I've now successfully flashed it with the OEM ROM and the WM6.1 ROM. Turns out I wasn't waiting long enough for the device to restart after flashing the ROM. Each time, it takes FOREVER to reboot with the new ROM.
8. Did a little happy dance, then bitched again because the device still does not recognize SDHC cards, which is the whole reason I upgraded the device toe WM6.1.

I can't emphasize the importance of the crying :D

Hope it works for you.

To make a long story short, I got my P550 bricked after trying to do a downgrade from wm6 eng crashoverheads
to another rom: Osc260A R05_P09.nb0 .
I renamed the file ( Osc260A R05_P09.nb0) to winceimg.bin and flashed it from SD.
During reading suddenly I got a white screen so I hit reset ( maybe i should have waited a while longer)
Then I got black screen and all leds on ( red and blue).
So it's dead and I can get to the bootloader anymore.

Needless to say I'll be very gratefull for any help!!!

Greetz
beto_nl

[pkovarik]

Hi i flashed my mio P350 with the P550 rom (after big mistake - low level format). Everything ok but i lost the infrared drivers. So now i want to go back to p350 software. Is there any P350 retail image rom like the P550's or is there any way to enable infrared again in P550 ROM ? Please help.

Note: I have another P350 device but there is not way how to backup this ROM. UBOOT is invalid - his choice ROM backup doesn't work (it's well known) and other tools (OS loader ...) doesn't work too on this device.

[Nuhy]

I have the same problem. The only p350 ROM that i have found is Chinese ROM.
Is there any possibility to translate that ROM into English or install something like Language Extender.

Thanks.

[prpetrov]

Hi i flashed my mio P350 with the P550 rom (after big mistake - low level format). Everything ok but i lost the infrared drivers. So now i want to go back to p350 software. Is there any P350 retail image rom like the P550's or is there any way to enable infrared again in P550 ROM ? Please help.

Note: I have another P350 device but there is not way how to backup this ROM. UBOOT is invalid - his choice ROM backup doesn't work (it's well known) and other tools (OS loader ...) doesn't work too on this device.

Hi pkovarik, i have the same problem.
You can make dump with pdocread
download it here:
http://nah6.com/~itsme/itsutilsbin-20080313.zip
The next step is to get the OS area of the ROM from your device in it's raw format.

- Create a new directory (our 'working directory'), e.g. C:\ROM.
- Open a command prompt in the your working directory.
- Extract the itsutils download to your working directory.
- Type 'pdocread -l' at the command prompt. This will produce output similar to below, these are the addresses of the ROM sections. If this fails, ensure your device is application unlocked and that HKLM\Security\Policies\Policies\1001 has a value of 1, NOT 2.

CODE114.88M (0x72e0000) FLASHDR
| 3.12M (0x31fc00) Part00
| 2.88M (0x2e0000) Part01
| 50.13M (0x3220000) Part02
| 58.75M (0x3ac0000) Part03
10.00M (0xa00000) EXT_FLA
| 10.00M (0xa00000) PART00
- We want to read Part02 on FLASHDR, so type 'pdocread -w -d FLASHDR -p Part02 0 0x3220000 Part02.raw' at the command prompt.. Now wait while a raw dump of the OS area of the ROM is created on your PC! It will take a while and not look like it's doing anything, but if you browse your working directory in Windows Explorer, you'll see a Part02.raw file growing in size You should double check your values from the pdocread -l output, and adjust accordingly!


unzip and in activesync copy libeay32.dll to WCE:\windows
then in cmd in itsutils directory run this
pdocread -w -d SMFLASH -p Part00 0 0xffc00 Part00.raw
pdocread -w -d SMFLASH -p Part01 0 0x1e0000 Part01.raw
pdocread -w -d SMFLASH -p Part02 0 0x1b20000 Part02.raw

This values
| 3.12M (0x31fc00) Part00
| 2.88M (0x2e0000) Part01
| 50.13M (0x3220000) Part02
may be diferent for you.

You will get 3 files Part00.raw Part01.raw Part02.raw
Place them in the net please.

You can read here for more info.
http://www.modaco.com/index.php?act=Print&client=printer&f=143&t=255064

[Nixeus]

Hii,

If you want to recover your pda, you must use the JTAG interface.
Hopefully, we have the software, it's the same for the HTC Hermes :)

BUt, we need to find the JTAG Pins on this PDA ! Anyone could find the JTAG PIns on the MIO P550 ?

[Nixeus]

Hi,

I have a good news !!!! We have finding the JTAG pins on the MIO P350/P550 and AIRIS T620 !!

The next step is to succes to dump the IPL !! I d'ont know how doing it....


Here is the jtag pins of our MIO/AIRIS :

http://img504.imageshack.us/img504/9780/bingoxe0.png (http://img504.imageshack.us/my.php?image=bingoxe0.png)


Goood luck !! And i need help in order to find an IPL for the MIO !

[archirt]

HI, I need ROM from P350

but only file winceimg.bin

HELP ME !! PLEASE !!

[masterkeybr]

Hi pkovarik, i have the same problem.
You can make dump with pdocread
download it here:
http://nah6.com/~itsme/itsutilsbin-20080313.zip
The next step is to get the OS area of the ROM from your device in it's raw format.

- Create a new directory (our 'working directory'), e.g. C:\ROM.
- Open a command prompt in the your working directory.
- Extract the itsutils download to your working directory.
- Type 'pdocread -l' at the command prompt. This will produce output similar to below, these are the addresses of the ROM sections. If this fails, ensure your device is application unlocked and that HKLM\Security\Policies\Policies\1001 has a value of 1, NOT 2.

CODE114.88M (0x72e0000) FLASHDR
| 3.12M (0x31fc00) Part00
| 2.88M (0x2e0000) Part01
| 50.13M (0x3220000) Part02
| 58.75M (0x3ac0000) Part03
10.00M (0xa00000) EXT_FLA
| 10.00M (0xa00000) PART00
- We want to read Part02 on FLASHDR, so type 'pdocread -w -d FLASHDR -p Part02 0 0x3220000 Part02.raw' at the command prompt.. Now wait while a raw dump of the OS area of the ROM is created on your PC! It will take a while and not look like it's doing anything, but if you browse your working directory in Windows Explorer, you'll see a Part02.raw file growing in size You should double check your values from the pdocread -l output, and adjust accordingly!


unzip and in activesync copy libeay32.dll to WCE:\windows
then in cmd in itsutils directory run this
pdocread -w -d SMFLASH -p Part00 0 0xffc00 Part00.raw
pdocread -w -d SMFLASH -p Part01 0 0x1e0000 Part01.raw
pdocread -w -d SMFLASH -p Part02 0 0x1b20000 Part02.raw

This values
| 3.12M (0x31fc00) Part00
| 2.88M (0x2e0000) Part01
| 50.13M (0x3220000) Part02
may be diferent for you.

You will get 3 files Part00.raw Part01.raw Part02.raw
Place them in the net please.

You can read here for more info.
http://www.modaco.com/index.php?act=Print&client=printer&f=143&t=255064


I have a MIO P550B and after update with rom: "Osc260A R05_P09" have troubles because has differeces between P550 and P550B (screen not centralized and audio too low), but before to update i made a backup of my original rom ("Oscar 270a_ut_r02" - Portuguese) the format is raw :
part00.raw, part01.raw, part02.raw and part03.raw, now i need to recompile on format nb0 but i dont know how to do. Can you help-me ? thanks.

link to files:
http://www.megaupload.com/?d=ZLPCD3AO

[Gurx]

Someone can tell me were I can find Crashoverhead's WM 1.6 ENG v1.5b ROM ???

I've search all net, with no lucky..... Ftp from http://airist620.positifforum.com doesn't have this ROM anymore....

Or if someone have this ROM, may upload this to Rapidshare ??

Thanks!

[tangcla]

Just a quick question if there's a WM6 ROM for the P550 available? I have one of these as my GPS. :) and if I could run WM6.1 it'd be much prettier :p

[Arpia]

Hello,

Is there anyway to make a nb0 file for the P550 from the part0X.raw extracted with pdocread.

thx

[adoramiss]

HI !

Here is a link for a wm6 rom for the mio p550 !!!!!

It will be cook from a p560 dump, but cooking for mio p550 !

http://rs351.rapidshare.com/files/90893585/Dump_P560.rar

:)
dear Nixeus,

can you please help with any info available regarding a wwe rom for Mio A201 ?
I am desperate, since almost 1 year i am triyng to find a rom image and nothing since,

thank you in advance,
Best regards

[wenigwisser]

Someone can tell me were I can find Crashoverhead's WM 1.6 ENG v1.5b ROM ???

I've search all net, with no lucky..... Ftp from http://airist620.positifforum.com doesn't have this ROM anymore....

Or if someone have this ROM, may upload this to Rapidshare ??

Thanks!

search /projet-renaissance at airis forum... There are links for all 6.1 roms...

[RuitjesRaver]

Version 1.7 of CrashOver wm6.1 for Mio P550 is comming.

I want to try this but not without a full backup of my current WM5 rom.

I followed instructions to get the raw files.

So what's next?

If I try the wm6.1 rom and I want to go back, what do I have to do with the raw files?

What tools are needed to compile them in a .nb0 or .bin file so I can put it back onto my P550.

for the people who want the raw files of a Dutch P550 I've put them here (http://rapidshare.com/files/177938718/dutch_raw_files.rar)
I have rom version R01.3.0108.0502

[joostden]

Link to the ROM: Rom_wm6_1_.1_ENGLISH_for_Mio_P550-350_v1.5b_by_CRashOverHead.rar

http://www.binsearch.info/?q=Rom_wm6_1_.1_ENGLISH&max=250&adv_age=&server=

Succes!

[Joaquel]

Anybody has the P350 ROM in english or spanish? I have de chinese ROM only.

The P550 ROM works perfectly, but I Have a P350.


Thanks

[yh950322]

Is there anyone has Chinese P360 ROM? I have a English P360 Rom developed by CrashOverHead and I installed it on my P350. It works! But I prefer to have a Chinese P360 Rom or someone can tell me how to get into engineering mode of P360. My friend has a P360 but I could not get into engineering mode to make a rom backup.

doraku88, can you get inito engineeing mode? I read a tHread on other forum and people said to slide the power switch to on and at mean time hold the power button on the top of machine. But it doesn't work for me.



Can you give me the english WM6 Rom

[alphalt]

Hi,

Link to the ROM: Rom_wm6_1_.1_ENGLISH_for_Mio_P550-350_v1.5b_by_CRashOverHead.rar


Thanks for link and everything is working, but I have found some bugs. If you start Calculator then you get error message about can't loading skin. Also there is two items in control panel not translated into english. Maybe someone can correct this and post link. I'll be thankfull.

EDIT: I have search forums and google, but nothing found. Please, maybe you can tell me. I have upgraded my MIO P550 with WM6.1, but no additionsal software works. For example there is Office Mobile or SD card drivers designed for WM6.1, but I get error "unsuccessful installation". Why ? If I have WM6.1 why no additional software works with this WM6.1 ?

[chen2008]

Thanks to crashoverhead for the WM61 update. I tried it on my P550 and it works fine!. The issue of Notepad, some french screens is there but that's ok..

Office has disappeared, but wifi is able to connect, that's what matters to me..

I tried installing some software, but none of them seem to install/work. Divx, Real etc.

Also ActiveSync does not work with my Vista. This does not bother me but I need to install apps that is the only reason to use ActiveSync..some are not CAB files.

Many thanks again and some questions...

..any recommended office substitute free?
..any gps application that's known to work? So far have not tried to get GPS to work as there is no application.

Looking forward to upgrades of this. Shame on M$ for not releasing this officially for small reasonable price..leaving us to old version.

[chen2008]

Oh BTW I am using 1.5b because cannot find English for 1.6b..perhaps I should use the french one until 1.7 english is released good chance to learn french :-)

[alphalt]

Hi,

The same issues for me... Everything else works just fine. Its very sad that no applications installs. No office, no nothing. It would be nice that regular WM6.1 applications will install then you can get office or SD drivers to support bigger SD cards. We all waiting for new relizes :)

[chen2008]

Upgraded my P550 to 1.6b French because could not get English...works great. Now all apps incl. Office is there and works. Just have to get used to a few french words :-)

[humaxman]

good morning :):):
rom Version 1.7 of CrashOver wm6.1 English for Mio P550 where are you ??????
my mio p550 is waiting for you :rolleyes:

[alphalt]

Hi,

Ok, maybe is there someone who can translate 1.6b french to english ?

[marasaar]

WinCEIMG engl. for Mio P350-P550

http://depositfiles.com/files/5300536

flaching direkt from SD-card!

OS 5.1.195 (Build 14929.2.2.1)

[alquere]

WinCEIMG engl. for Mio P350-P550

http://depositfiles.com/files/5300536

flaching direkt from SD-card!

what is the version of ROM?

[arcadekidflo]

Any new roms out there ? All i want is WM6.1 in english

[bigredone]

Has anyone installed crashoverhead's wm6.1 p350/550 rom on p360. I have the dutch p360 (it was the only one I could get hold of), but really need the english ROM, any help would be greatly appreciated.

[bigredone]

Is there anyone has Chinese P360 ROM? I have a English P360 Rom developed by CrashOverHead and I installed it on my P350. It works! But I prefer to have a Chinese P360 Rom or someone can tell me how to get into engineering mode of P360. My friend has a P360 but I could not get into engineering mode to make a rom backup.

doraku88, can you get inito engineeing mode? I read a tHread on other forum and people said to slide the power switch to on and at mean time hold the power button on the top of machine. But it doesn't work for me. Question's in the title really!

[CristianC]

http://airist620.positifforum.com/le-t620-et-la-rom-wm61-f16/projet-renaissance-rom-wm61-version-20-mio-airis-t3101.htm

for the moment only 2.0 french version is available, but we are waiting for english version :)

[www.g5m.ro]

http://airist620.positifforum.com/le-t620-et-la-rom-wm61-f16/projet-renaissance-rom-wm61-version-20-mio-airis-t3101.htm

for the moment only 2.0 french version is available, but we are waiting for english version :)

where found new version in englesh ???

i have P350 and i have WM 5.0 and have problem with GPS !!! found signal for 1-2 minut and loose !!!

[RuitjesRaver]

YES, it's finally there.

Windows Mobile 6.1 ENGLISH for the Mio P350/P550

CrashOver is still working on a WM 6.1 English version for the Airis T620 & T610, but will be ready soon.

Thank you CrashOver for releasing an English version.

You can download this rom at http://airist620.positifforum.com/le-t620-et-la-rom-wm61-f16/projet-renaissance-rom-wm61-version-21-mio-airis-t3122.htm

[djcristi]

YES, it's finally there.

Windows Mobile 6.1 ENGLISH for the Mio P350/P550

CrashOver is still working on a WM 6.1 English version for the Airis T620 & T610, but will be ready soon.

Thank you CrashOver for releasing an English version.

You can download this rom at http://airist620.positifforum.com/le-t620-et-la-rom-wm61-f16/projet-renaissance-rom-wm61-version-21-mio-airis-t3122.htm

it's working fine on p550, has some untranslated parts, but it's ok.

it supports sdhc.

you have to low level format before the flash, doing this after will give you a bricked device and you have to flash the rom again.

you have to do the activesync trick to prevent it from starting

it takes more ram memory to run, with wm5 i was having 42mb free after boot, with this i have 36.

[w1md]

What is the activesync trick?

Version 2.1 works perfectly, thx a lot!
However, I can not connect to Windows Mobile Device Center 6.1.
(Cannot communicate with the PC because of the following Remote Networking error (Error 608)).

Any hints? Thanks!

[www.g5m.ro]

What is the activesync trick?

Version 2.1 works perfectly, thx a lot!
However, I can not connect to Windows Mobile Device Center 6.1.
(Cannot communicate with the PC because of the following Remote Networking error (Error 608)).

Any hints? Thanks!

check if you have last version of activ Sync !!!

[djcristi]

What is the activesync trick?

Version 2.1 works perfectly, thx a lot!
However, I can not connect to Windows Mobile Device Center 6.1.
(Cannot communicate with the PC because of the following Remote Networking error (Error 608)).

Any hints? Thanks!

the fake server sync trick, google it

[w1md]

:)Windows Mobile Device Center recognized my P550, and I am able to sync:)

Instead of using USB (yes, I have the right cable!), I tried my bluetooth USB dongle to connect to my PC.

Amazingly, this works!

Any hints of how to solve the USB problem :confused: ?
While installing in Windows, it says ...PROTOTYPE...don't forget to rename ID...blabla

Thanks guys.

[marasaar]

Do anyone have WinCE.img for P550 GERMAN?
:confused:

[mihaicora]

Hello,

I have a mio p550 i did a lowlevel format after that i upgrade from sdcard after that i reset the pda and now i have a black screen, nothing happens. What's gone wrong, what should i do?

[djcristi]

flash again, u have to do lowlevel before update

[timmmooo]

Hi, first of all thanks for the Forum!

I am trying to upgrade my P550 to WM6 and I am not succeeding in it, so I try my luck and want to ask the Forum politely to help me out!!!

I have done this like told in the forum:

Enter on bootloader mode
Make a low level format
Copy the file "winceimg.bin" on your SDCARD
Put your SDCARD on your PDA
Flash YOUR PDA -) Under last step I am using as well 0=upgrade Image as well 1=UBOOT

Under booth situation (0 and 1) PDA tells me: Mountdisc Success

But then the Bluescreen stays forever under both ways and tells OPEN WHOLEIMAGE or OPEN UTimage.

What should I do in your opinion?

After reset and open/close the screen stays black. I can still enter in the boot menu...I sometimes waited 4-5 hours on the Bluecreen....Please!!

[timmmooo]

I have changed the SD card to a smaller one, 500 MB and that seems done the trick! 6.1 is installing.

[BlueMoon2510]

Hi,

I already found a working WM6.1 ROM for my P550 in english. Is there anybody who has a ROM in german? WM6 would be great, WM5 is okay too!

[mihaicora]

thanks djcristi

[KrakaJap]

Is anyone else having problems with GPS once WM6.1 is installed (on the P550)? I tried using Google Maps but it never finds GPS.

[BlueMoon2510]

Hi,

in Google Maps just go to Menu -Options - GPS-Settings and set the COM port to manual COM2:

[masterkeybr]

I have two mios: P550 and P550B(Braziian version), i need to updload the rom of p550b and put on p550, i have extract parts (part00.raw, .., part02.raw) of p550b, but i dont know how to convert this files on a valid rom (nb0 file), anybody can help-me ? please.

[RiotRay]

Hi !

I'm using a Yakumo DeltaX 5BT (should be about the same as Mio P550). I did use a "freedom input keyboard" with this device. Now I upgraded to WM6.1 with Crashovers version 2.1. Although bluetooth is generally working, none of the drivers for the keyboard would work.
Can somebody tell me, if this WM6.1 version uses MS or the Widcomm bluetooth stack ?

Also, I noticed after installing the bluetooth drivers for the keyboard, that suddenly I didn't get sound anymore....
Very strange...

Right now I'm reinstalling.

[arcadekidflo]

Hello, i installed WM6.1 on Mio P550 ( the french rom translated to english ) and i have a problem with the ..sound . It keeps setting itself to off , and even when it's on , i have no sound , speaker or headphones .
Is it a bug of the rom ?

[RiotRay]

@arcadekidflo

Did you try to install widcomm/broadcomm bluetooth drivers ?
What you described is exactly what happened to me, after I tried to use widcomm/broadcomm bluetooth drivers.
Your device needs the MS bluetooth stack.

I'm afraid you have to reinstall WM6.1.
Try not to hassle with the bluetooth stack this time. It worked for me (and I don't even have a Mio P550 -----> I have Yakumo DeltaX 5BT).

regards

[arcadekidflo]

Well, i did use bluetooth for a few transfers but i did not install any drivers , left it just like it was . Any other ideas , some registry tweaks maybe ?

[nekia]

Hey guys I just bought brand new p350 (bargain: 90 euros:) and I was wandering if there is an update from wm5 to higher?

regards :)

[Nixeus]

Hi my friend,

I actually work on wm6.5 for our famous Mio /airis !

http://www.youtube.com/watch?v=6pkzUUQg51w

Soon available ;)

[icho68]

Hi Nexius,

When you are going to release new 6.5 for MIO P550 in English

thanks,

Icho

[BlueMoon2510]

Hi my friend,

I actually work on wm6.5 for our famous Mio /airis !

http://www.youtube.com/watch?v=6pkzUUQg51w

Soon available ;)



Great! I'm excited to hear that. How soon is "soon" ? :D

[seared]

hi guys,
I want to know how can I dump the .bin file from CrashOver 's wm 6.1 english rom, and I want to make a Chinese version. I used Imgfstodump and ActivePerl, but all are failed, anyone help me? thanks a lot.
I'm freshman of ROM cooking....really need your help.

[cheyn]

DONE!!! With the following procedure i can repair my p350 lowlevel formatted.
The rom in archive is the only that don't hang upgrade procedure on 99% between the 6+ i've tried.

MITAC P350 flashed with P550 fimware fully working!

Many thanks also to pdaclub.pl!

So:

1) Download this file http :// www . klubin.hrleon . com / pda / ROM_do_p550_rg . zip (delete space)
2) Boot your mitac in bootloader model (down arrow pressed)
3) Go to "0=Image Upgrade Tools"
4) Then go to "0=Image by USB"
5) Decompress the file to a folder and open dnw.exe
6) Check Configuration->Options. Set USB Port Download address at 0x3000000
7) Connect the pda to the pc usb port
Cool On dnw.exe go to USB Port->Transmit->Transmit and select MioP550 - Osc260A R05_P09.nb0
9) Wait for finish flashing procedure (it take about 2 minutes).
10) Disconnect the pda and make hard reset
11) You done!!!

I tried many rom but this is the only that don't make flashing procedure hang at 99%.
The rom contain only English software.

Now I'm very happy and looking for italian one!

BR

cid

thanks man, works super!!!realy really apprecited.

[moonscapex]

My Mio p550's Google maps app just stays at 'Seeking GPS Satalites... (0)' after upgrading. What should I do? My GPS settings are correct.

Thanks,
Will

P.S. Windows Mobile 6.1 works great!

[jerad]

hi guys,
can you help me with this problem...?
i had a mio p350 flshed with p550 and windows 6.1
but yesterday when i try to turn it on suddenly it started formatting and by mistake i turned it off at 2% of formatting. then its not starting up again at all....
i have tried all the resetting methods, and also tried to connect using usb but nothing appears. when i connect to pc using usb orange light comes up on the top. and whenever i reset it flashes but nothing on the screen...
does anyone here to help?
thanks in advance...

[BlueMoon2510]

Hi,

are you able to get into the UBOOT / Oscar menu? While holding down the "joystick" press the reset button with the pen.

You should see then a blue screen from within you can reflash (Image Upgrade Tools) via SDCARD.

Copy the image file to the SD card an reflash it again.

[moonscapex]

Does anyone know when wm6.5 is coming? I saw the youtube video, and it looks great! :D

[moonscapex]

Does anyone know when wm6.5 is coming? It looks great on the youtube video. I can't wait.

[icho68]

Guys,

I`m having troubles to go in bootloader on my Mio P550.
Is it possible someone to give me some hints how to install wm 6.1
The normal way with joystick and reset is not working.
Pda is wit original wm 5 rom ver: R05.3.01.0101.0331
Thank you,

[moonscapex]

If you can't enter the bootloader mode you can't upgrade, so make sure you did it right.
First, hold the jostick down (towards the charging plug).
Next use your stylus to press reset then release it.
Make sure you hold the joystick until the white Mio screen appears.
If it still doesn't work, try holding it for different lengths of time, and make sure your SD card is inserted.

Hope this helps!

PS - You might want to wait for wm6.5. It could come out any day now.

[helpos]

Try this http://rapidlibrary.com/index.php?q=rom++english+for+mio+p550+350&filetype=0
just format SD on FAT not on FAT32

on mio p350 work good
:cool::cool:

[helpos]

Guys,

I`m having troubles to go in bootloader on my Mio P550.
Is it possible someone to give me some hints how to install wm 6.1
The normal way with joystick and reset is not working.
Pda is wit original wm 5 rom ver: R05.3.01.0101.0331
Thank you,

try this http://www.zshare.net/download/591709639d417dc1/

projekt reinessance wm6.1
work very good on mio
p350

;);)

[icho68]

I would like to thank you to all of you for the support.
Finally I succed. Great job was done from crashover
Good bless him.

[devil-strike]

indeed very nice of him to port it to the p350/550 :)
Works perfect here on mio p350

[Zly]

Hi,

I have a good news !!!! We have finding the JTAG pins on the MIO P350/P550 and AIRIS T620 !!

The next step is to succes to dump the IPL !! I d'ont know how doing it....


Here is the jtag pins of our MIO/AIRIS :

http://img504.imageshack.us/img504/9780/bingoxe0.png (http://img504.imageshack.us/my.php?image=bingoxe0.png)


Goood luck !! And i need help in order to find an IPL for the MIO !


Hello ALL!

In this topic (article) i describe method restoring MIO from brick-state (it may be flash uBoot, format uBoot, bad full flash) via JTAG.
I restored my MIO a701 with JTAG.

What we need:
1. ocd commander (ocd_cmdr.exe)
2. clear IPL (option)
3. clear uBoot (from full R46)
4. JTAG cabble
5. Soldering iron
6. BIN2HEX utility (HJTAG 0.7.0 have this converter)
7. Disassembler (Option)

What I do for brick state MIO: only flash uBoot from 48 to 55 - AND my MIO on power on light only buttons!

JTAG cabble:
Image:http://www.motvey.com/wiggler.gif
In this scheme we don't need SRST_N signal PC_VCC and RIGHT PART of JTAG pins (not used)

Image
Where JTAG connection on mio (left pins!)

Image:http://www.motvey.com/2.jpg
LPT connection

Image
Power connection for Microcircuit.

ImageImage:http://www.motvey.com/debugger.gif
JTAG sheme (montage)

For all pictures 7.1 megapixels you may download from files in below

Install ocd commander
Install HJTAG

1. Connect power to mio
2. Connect JTAG cabble
3. Place Battery to mio (it is very important)
4. Connect power for JTAG cabble
5. Connect LPT port to JTAG cabble
6. Press reset and hold!
7. Start OCD commander
8. Click all ok
9. Mio will blank leds. See some window:
Image
10. release reset and enter command:
pc 0x1800
hbr 0xa0000000
go
load (programm ask you for file in hex format. give him WINCEIMG-UBOOT.BIN.1.hex)

if programm halt on 0xa0000000 - IPL good!
In next you must load WINCEIMG-UBOOT.BIN.1.hex to disassembler and with command step hbr go pc manipulate with programm execution uBoot from ocd commander and monitor in disassembler!
Press buttons for enter to uBoot, and execute uBoot step by step (pass some cycle). Some times uBoot go from 0xA00XXXXX address to 0x000XXXXX address - in this case do command pc 0xA00XXXXX where XXXXX same as in 0x000XXXXX. If you miss this jump - next what do mio is freeze!
On XX Attempt my MIO show uBoot menu!

If you flash IPL that don't start:
1. Unpack IPL from full flash R46 (how it make - please describe)
2. Depack IPL on two part (0x200 bytes are repeated on all IPL)
3. Convert IPL to HEX format (start address 0x1800)
3. Load IPL to memory after enter to ocd commander
4. And enter command that shows above


Good luck

Files used in restoring:
http://depositfiles.com/folders/PU77HUBDY folder with files:

1. SeparateFiles.exe 566.50 KB (my programm for separate file with 0x200 interval)
2. fullimage.rar 9.90 MB (images mio jtag cabble 7.1 megapixels)
3. ocd_cmdr.exe 7.64 MB (OCD Commander for jtag debugging)
4. H-JTAG+V0.7.0.rar 900.12 KB (JTAG Server, but used onlu BIN2HEX converter)
5. Customizing_Hardware_J... 137.71 KB (information of JTAG wiggler cabble)
6. DOC_G3.zip 1.86 MB (DOC G3 technical information - may be for make programm in hex format wich will flash memory on the fly!)
7. MIO_A701_R46_WWE.rar 27.73 MB (full image R46 version - where i get uBoot)
8. WINCEIMG-UBOOT.BIN.1.hex 812.38 KB (uBoot in hex format)
9. WINCEIMG-UBOOT.BIN.1.bin 288.81 KB (uBoot in bin format separeted from uBoot in full flash)

All programm have authors, but license is free!

[bogdancalin]

Hello,

My P350 device remains in align screen menu when restart.
I put different ROMs inside (including P550 version) and it do the same.
Can someone help me pls?
You can contact me on calin_bogdan2005@yahoo.com

Many thanks,
Boby.

[helpos]

bobi
try downgrade before upgrade ROM

if dont work -sorry
problem is in HARDWARE

[fikret]

plz help

I got an P360 from ebay so I can't tell you much details what the ROM version is because the language is greek, and I don't recognize even the letters....

I tried to flash my P360 and insert the new WM 6.1, but I can't access the bootloader at all. I tried everthing you suggested on this topic, and nothing helped me.

Is there any other way to flash the P360 and insert the new WM 6.1?

Greetings

[baruchal]

Hi, first of all thanks for the Forum!
can you help me with this problem...?
I have Mio P550 with WM5, and when I use the IGO - GPS software, afther some time I got error:

"Fatal Error
Fatal error occurred
in main thread.
Address : 0x4b56420c
Exception : 0x000001d "

I have reinstalled the WM5 and deleat all the ather programs, and I get the same error.

Then I decide to upgraide to WM6.1 that i have find in this forum - post # 151 by timmmooo.

But when I do the - low level format, I got the error message:
" FMD GetBlockStatus Error = "
I see the messeage at the biginning, and then see 2% of the format to 16% , and see the message againe, after some time, the format continue, and again the same in 27% of the format process and so on.

When I install the WM6.1 by using "winceimg.bin" on my SDCARD, during the installtion of WM6.1, it make an fomatting process, and iI can see the same error massege " FMD GetBlockStatus Error = " at the bottom of the screen.

I have to say that WM6.1 is operrate, but maybe the error during the format is the reasion why I got the "fattal Error" at the first place.

Can I fix the error with the formating?
What should I do in your opinion?

[moonscapex]

I got that exact same error every time I upgraded and everything is working fine.
Instead of using igo, use oncourse 8. Igo doesn't work on My mio p550 either.

[baruchal]

I got that exact same error every time I upgraded and everything is working fine.
Instead of using igo, use oncourse 8. Igo doesn't work on My mio p550 either.

Thank you moonscapex for your fast response.

It is very interesting that you got the same errors, but I can tell you that in the begininng befor about 18 mounth I have no errors With IGO6 and IGO8, that I have installed from forums in the web.

The fatal error started befor about a yaer ago, when I and my friend have use my MIO P550 with IGO8 in Israel, Canada and US.

I know that only some of the versions of IGO8 in the web, are working with MIO P550 or P350.

[moonscapex]

If you go to ppcwarez.org they have many different versions of IGO8 for download.
You might want to try some of those.

[baruchal]

If you go to ppcwarez.org they have many different versions of IGO8 for download.
You might want to try some of those.

Thank you moonscapex for your answer.
I am a member in the foroums ppcwarez.org and ppcwarez2.com from them I have download GPS software.

The last one is Nav N Go iGO Amigo v8.4.2.95590 (Jun 23 2009)
from the forum of ppcwarez.org with all the maps, POI, buildings, dem of Canada + US + Israel.
I have find now that it working good and very fast related to IGO8, in my home with my MIO P550 + WM6.1, but I still have to test it on the road for some days, and see if it will not make any error.

By the way, I have installed as the IGO8 8.0.0.35389 from Apr 15 2008, but it working very heavy related to IGO Amigo, and I have to see if it will make no errors.

[Rosatvision]

Hi,
thanks to your forum,i finnaly installed windows 6 on my p350,but there is a problem:i have no longer ir active.do you have any solution ?thank you!

[aguditu]

hello
help me please I have a P350 which I tried to install igo and during the installation it has restarted. from then I can not do anything it only appears a white screen when must go in to wm and nighter bootloader i can`t acces

[Cyborg2004]

Is WM6.5 for P550 ready?

[alphalt]

Hi all,

I've upgraded my MIO P550 to WM6.1. Everything works just fine except one thing. Bluetooth search for devices, found them, make a connection and immediately disconnects and never connect again to this device. I've tried it with several mobile phones and computers, but effect is the same. Have you any ideas what can be wrong ?

alpha

[moonscapex]

Windows Mobile 6.5 for Mio p500/p350/Airis is Ready to Test

Demo
YouTube Video Demo: Here (http://www.youtube.com/watch?v=6pkzUUQg51w)
Download
French Beta: MegaUpload (http://www.megaupload.com/?d=Z2678P8F)
English Beta: Coming Soon

Installation

Backup your data first. Upgraded formats your device.
1. Extract the file using 7-zip or WinRAR
2. Copy the 'winceimg.bin' file to your SD card.
3. Put the card in your Mio.
4. Hold the down button (on the joystick) and press reset with a paperclip.
5. When the blue screen comes up, use the joystick to navigate:
If you want, choose number '6= LowLevelFormat' before you upgrade. It just makes the process a little safer.
6. Choose '0= Image Upgrade Tools'
7. Choose '1= Image by SD/MMC'
8. When the process is done, press the reset button.
The fist start might take a while, but are fast after that.

If you can only read english still, give it a try. French is fairly easy to understand with the icons.
English version coming soon ;).

All credit goes to 'Nixeus' or crashoverhead.

[azboo13]

that's awesome, great work, looking forward to the English version.

[Xnergy]

So far it's only french, but try it!
This is the beta version.
Here is the file:
http://www.megaupload.com/?d=Z2678P8F

Follow instructions above.
If you can only read english still, give it a try. French is fairly easy to understand with the icons.
English version coming soon ;)

I can't wait for the english version, it's very cool,my p550 will get a new life :D

Thank you very much:)

[humaxman]

im waiting for English Version Windows Mobile 6.5 for Mio p500/p350/Airis

and is beter for cooking lite versions

[danimajo]

Windows Mobile 6.5 for Mio p500/p350/Airis is Ready to Test

Download
French Beta: MegaUpload (http://www.megaupload.com/?d=Z2678P8F)

All credit goes to 'Nixeus' or crashoverhead.


Is it only for Airis or is it for P550 to?

[moonscapex]

It is for both PDA's and i have been using it for 2 weeks on my mio.

[paha77]

I have the same issue and don't know how can I solve it.

What is the latest version of WM6.1 ROM?

Hi all,

I've upgraded my MIO P550 to WM6.1. Everything works just fine except one thing. Bluetooth search for devices, found them, make a connection and immediately disconnects and never connect again to this device. I've tried it with several mobile phones and computers, but effect is the same. Have you any ideas what can be wrong ?

alpha

[cowxie]

Hi folks,
I've got a Mio P550 and wish to flash with WM6.1. The unit came factory set up with WM5. From this site and many others, I've found the ROM that I want and instructions for flashing. So far, so good. However, I've not been able to complete the process because of something related to the following 2 mesages:
- lowlevelformat find ba; which occurs after a successful USB or SD ROM load. And then I get a...
- getblockstatus error.

The Mio seems to complete the process, because it asks to be restarted. However, I suspect that the actual memory chip may have issues and consequently does not take the re-flash.

Any suggestions whatsoever would be appreciated. Or locations for more info on this matter. Thanks much.
/cowxie

[trooper44]

Hi All,

I installed the WM 6.1 to my P550, but unfortunately I can not sync with my PC.
I've tried the Activesync 4.1 and 4.5 also, but the PC can not identify my device.

What should I set to make the contact, 'cause I would like to use some programs on my mio. :(

THX in advance.

Trooper

[moonscapex]

Hi folks,
I've got a Mio P550 and wish to flash with WM6.1. The unit came factory set up with WM5. From this site and many others, I've found the ROM that I want and instructions for flashing. So far, so good. However, I've not been able to complete the process because of something related to the following 2 mesages:
- lowlevelformat find ba; which occurs after a successful USB or SD ROM load. And then I get a...
- getblockstatus error.

The Mio seems to complete the process, because it asks to be restarted. However, I suspect that the actual memory chip may have issues and consequently does not take the re-flash.

Any suggestions whatsoever would be appreciated. Or locations for more info on this matter. Thanks much.
/cowxie
I got this message too but i was brave enough to restart, and it worked flawlessly. I
wouldnt worry about it.

[cowxie]

Thx, moonscapex. I did try to restart and only got a black screen. So, I re-flashed the ROM. Restarted and got a black screen. Tried 3-4 more times, each time got a black screen. Any other suggestions?

[moonscapex]

You should
a) Re-download the ROM in case it got corrupt
b) Download a different ROM

Which ROM are you using now? I can give you links for one that works.

Could you try the wm6.5 ROM? It worked on mine really good. The download link is above in one of my other posts.

Hope this helps :)

[cowxie]

moonscapex, i've now tried wm6.1 and 6.5 without success. the one item that is consistent is the lowlevelformat and getblockstatus messages during the flash process followed by an unresponsive p550 (i.e black screen). any thoughts? suggestions?

[moonscapex]

OK, how are you transferring the ROM (USB or SD)?

[cowxie]

edit - see next post

[cowxie]

moonscapex,
i've tried both SD (on 512MB and 2GB, freshly formatted FAT16 cards) and via USB (using DNW v0.50I). In all cases, given the messages showing up throughout the Image File upgrade, it looks like the winceimg.bin file is read okay. But then the format process starts and i see the lowlevelformat msg, then a little while later the getblockstatus error. not sure what to do next...
/cowxie

[moonscapex]

I've gone over almost all the troubleshooting I know. A couple things you could try is upgrade the BIOS (the thing that is used to upgrade) or try wm5.0 (the 3rd post i think). When you reset after the upgrade, do you see the white and green mio logo?

[jvchawk]

It is for both PDA's and i have been using it for 2 weeks on my mio.

Moonscapex,

As I understood this beta version for WM6.5 has not been optimized by Nixeus (alias CrashOverHead) yet and since the memory in the P550 is rather limited, did you experience any slowdown during navigation with TomTom or any application frozen due to insuffcicient memory? Thanks.

[moonscapex]

Moonscapex,

As I understood this beta version for WM6.5 has not been optimized by Nixeus (alias CrashOverHead) yet and since the memory in the P550 is rather limited, did you experience any slowdown during navigation with TomTom or any application frozen due to insuffcicient memory? Thanks.
I found that it boots faster (20 seconds after the first boot) and has more free RAM. If you don't clutter it with hundreds of useless apps, it will be just as fast as wm6.1. If you uninstall an app, i would use sktools to completly remove it. I have about 25 apps, and my boot time is 2 minutes.