** Urgent ** my Wizard cant power on after upgrade ROM

[nicholas99]

Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?

[mbranscum]

Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?

That really sucks...

[naeemwaqas]

Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?

which rom did u flash it with ??? wat ver ur configs before that . ur ipl/spl version os and etc.

sometime it happens that the power button doesnt works ....

try poking the reset button wiz ur stylus ... press and hold for sumtime and c wat happens

if it starts then ... press it again and wen the screen goes blank pree the camera button and hold it ... ull get into the bootloader ... den connect da usb and flash a new rom or da old factry one ...

i use molski's rom its really stable

[nicholas99]

well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......

[naeemwaqas]

well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......

did u try da soft reset ???

[nicholas99]

yes i did but nothing happen at all

[zoroskynet]

I have the same problem. IPL and SPL 2.15.00001 and tryed to downgrade but after restart it does not power on. Tried everything but no way to power on. Is somebody know how to make it work again.

Regards,

[molski]

You guys tried to flash a G3 Rom on your G4 Wizard.
So your bootloader (IPL/SPL) that is 2.xx.0001 is overwritten by a G3 bootloader that is 2.xx, so in other words....your devices are bricked.
Please someone, correct me if I am wrong.


Molski

[clemsyn]

yup, I agree. Bricked hopefully someone can fine the JTag on these devices.

[Dr Puttingham]

Wow that sucks! Full moon over Miami last night, naw that can't be it .....

Sorry but unfortunately I must follow my Grandmother's advice concerning when I don't have anything nice to say...

[ArtXT]

R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.

HOPE those master GURU's can do something!

[magicer]

So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much

[Dr Puttingham]

Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??

I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"

Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...

And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.

Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.

Sorry....

[Dr Puttingham]

So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
a G4 has a .00001 on the initial splash screen.

[molski]

R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.

HOPE those master GURU's can do something!

The problem is that if your bootloader (IPL/SPL) is fuc*ed up, there is no way to get it in bootloader mode to do a flash!
Only known solution is with JTAG connector, but that solution is not a clear solution yet, but I dont know nothing about that solution (simply...because I never needed it).


Molski

[mrbabcia]

Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??

I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"

Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...

And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.

Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.

Sorry....

I knew I have a G4 and can't upgrade/downgrade with G3 roms or even change IPL/SPL, but I did that :]
Just found ROM v2.22.1 (I think), like my original Wizard's was. I was so happy that I found it, that I forgot about G3 chips existence 8)
Well, ROM was for G3 -_-
Just ran too fast and slipped. Maybe I got that speed after very often Pioneer BCT 1430 flashing. It is just immortal :]

[nicholas99]

well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.

[Dr Puttingham]

well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.

I just dunno...

[jwzg]

I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.

I just dunno...

...which is one of the reasons why carriers make it so hard to flash a ROM from one carrier to the device of another.

[Luiz]

Hi Molski
I'm new here.Just 'd like to know if you could support me on this matter.
Here we go...
I've flashed my 9100 from wwe to esn (spanish) with the ROM 1.3.7.5 or something like this.
This is the problem...I got a power failure in the middle of the flashing process.So now the device isnt able to start up it didnt install the OS properly.
Now it says:
IPL 2.24 (i managed to flash the ipl n spl)
SPL 2.24
OS 1.3.7.5
But I'm pretty sure that there's no OS watsoever because after keep trying flashing with other ROM in bootload mode.I finally managed with an Orange of 34 mb it updated the ROM,that is the IPL And SPL and with the process was running I've noticed the screen got blank and updated it properly.I was realy happy when I saw it but even though it did it properly I still got the same problem.The pda doesnt start up.When I flashed it for the first time I did it with care,followed all the instructions,that is, unlocked the CID first etc.But had the damn joy of getting a power failure in the middle of it.
I'm just wondering if one of you would be able to gimme a light on it.I've tried everything but flashing it with a G4 ROM coz I know it wont work.
Regards
Luiz Santos



Molski[/QUOTE]