Camera: macro function working?

[pietrucci]

Hello, does the macro function (the switch near the lens) really work? I tried several pictures and can't see any difference between normal and macro.

I notice that I can't put the switch fully to the top (to normal mode) but easily full to the bottom (to macro). Maybe it's dispositioned and therefor it doesn't reach the macro function internally?

[vijay555]

Works extremely well for me. You are trying to use it in a macro fashion right, ie trying to focus on something say < 15cms away?

V

[pietrucci]

Works extremely well for me. You are trying to use it in a macro fashion right, ie trying to focus on something say < 15cms away?

Vyes I am. I'm afraid by device has to go back to repair (just got it back today from another repair which lasted a month...)

[MikeChannon]

yes I am. I'm afraid by device has to go back to repair (just got it back today from another repair which lasted a month...)

This is sheer carelessness from your last repair. There is nothing broken on the camera zoom just that the back has been placed on and the catch on the casing has missed the toggle arm on camera. A simple 20 sec job which you could easily do yourself if it weren't for that VOID sticker. Give your last repairer a good talking to.


Mike

[pietrucci]

This is sheer carelessness from your last repair. There is nothing broken on the camera zoom just that the back has been placed on and the catch on the casing has missed the toggle arm on camera. A simple 20 sec job which you could easily do yourself if it weren't for that VOID sticker. Give your last repairer a good talking to.


MikeIf you mean the little sticker on top of the screw next to the camera on the right, this is already broken, by the HTC repairer I assume...
When I unscrew the back (4 screws) then I will be able to repair it myself you think? (first find the appropriate screwdriver).

[MikeChannon]

If you mean the little sticker on top of the screw next to the camera on the right, this is already broken, by the HTC repairer I assume...
When I unscrew the back (4 screws) then I will be able to repair it myself you think? (first find the appropriate screwdriver).

Yes it's an easy fix as there is nothing broken inside. Get set of phone screwdrivers from maplin or such like. Open phone bottom end first needs just a little bit of easing out as there are pop in connections all around. Tilt bottom edge up and with a bit of judicious wiggling it will pop off!. The problem will be immediately obvious. There is a small "arm" on the camera that fits into the movable macro switch on the case.

Easiest wat I've found to get them to match up is move both lever and and switch toward top of device and place back on by moving it straight down onto phone (not at an angle). Before putting screws in check switch moves fully and in good light you'll actually see lens and black ring moving in an out. Once full screwed up (forgive expression) you may need to press a little on top edge to get case to return fully into position.



Mike

[pietrucci]

Yes it's an easy fix as there is nothing broken inside. Get set of phone screwdrivers from maplin or such like. Open phone bottom end first needs just a little bit of easing out as there are pop in connections all around. Tilt bottom edge up and with a bit of judicious wiggling it will pop off!. The problem will be immediately obvious. There is a small "arm" on the camera that fits into the movable macro switch on the case.

Easiest wat I've found to get them to match up is move both lever and and switch toward top of device and place back on by moving it straight down onto phone (not at an angle). Before putting screws in check switch moves fully and in good light you'll actually see lens and black ring moving in an out. Once full screwed up (forgive expression) you may need to press a little on top edge to get case to return fully into position.



MikeMany thanx, it works again!!!
As you said I lifted the bottom, played with the switch and it fell into place!
First I tried to remove the whole cover, but at the cameraside it didn't get off that easy and I was affraid to damage something. But then I solved it without lifted the whole cover. SO I'M VERY HAPPY NOW!!!
(by the way, is there a trick to get the whole cover off? Not that I want to do that at the moment...)

Pietrucci

[MikeChannon]

Many thanx, it works again!!!
As you said I lifted the bottom, played with the switch and it fell into place!
First I tried to remove the whole cover, but at the cameraside it didn't get off that easy and I was affraid to damage something. But then I solved it without lifted the whole cover. SO I'M VERY HAPPY NOW!!!
(by the way, is there a trick to get the whole cover off? Not that I want to do that at the moment...)

Piettrucci

Knew you could do it, congratulations. The back is fiddly, it helps if you have the tool that looks like a flat blade screwdriver with a slightly bend tip - meant for providing a little leverage to pull the case out enough to release the click in clips. A blunt knife could also be used if you want to go down market. Steer clear of a sledgehammer though!


Mike